deVOL THE GRAND TOUR LIBRARY LAMP User manual

THE GRAND TOUR
LIBRARY LAMP
CONTENTS, SPECIFICATION &ASSEMBLY GUIDE

Handcrafted and assembled in the UK ©
CONTENTS & ASSEMBLY
PRODUCT SPECIFICATION
113A black plastic mains plug
22.5 metres of burgundy twisted ex cord
3Black plastic in-line switch
42 x Lampholder (B22)
52 x Brass cu
62 x Ceramic shade
72 x Brass shade ring
82 x Bulb
9Brass Frame & Base
10 Wooden Lamp Base
3
9
10
1
2
5
4
6
7
8
Total dimensions w 910 h 735 d 215 mm
Shade dimensions ø 195 h 90 mm | 220 g (approx.)
Shade material Glazed earthenware
Cable 2.5 metres of burgundy twisted fabric ex cord
Lampholder 2 x Bayonet mount (B22)
Max wattage 12W
Voltage 230V 50Hz AC
Bulb included 2 x Dimmable LED lament bulb (warm white)
IP rating IP20

Metal nishes should only be cleaned with a soft, dry cloth. Harsh cleaners and abrasive pads will damage and remove the
nish. Always switch o the mains power before cleaning the ttings.
Always remove the shade before cleaning - taking care not to lose the shade ring or brass cu. The shade can be cleaned with
a soft, damp cloth or sponge. Abrasive pads could scratch or dull the surface nish.
Spare/replacement parts are available for this light, please contact our customer service team if needed.
Please recycle your packaging in accordance with local regulations.
Our lights are all handcrafted and assembled in the UK. We make every eort to source our materials and components from
local suppliers in the UK. All of our lights are supplied with low wattage energy ecient LED lament bulbs. Almost all of our
packaging is recyclable and our designers are constantly working with suppliers to make improvements in this area.
Do not let children play with this product or packaging, small components pose a choking hazard!
Always ensure that the light is switched o at the mains before changing the bulb or making adjustments to the
tting.
Only t the correct type and wattage bulb.
Never leave a tting without a bulb inserted as exposed contacts risk accidental electrical shock.
This light is for use in a dry indoor environment only.
Ensure that the tting does not come into contact with any liquids.
-
-
-
-
-
-
SAFETY & IMPORTANT INFORMATION
CARE & MAINTENANCE
SUSTAINABILITY
ASSEMBLY GUIDE
Remove light from packaging and inspect for damage which could render the product dangerous (damaged insulation or
exposed wires). If damaged, please contact our customer service team
and do not install the light.
Ensure the light is unplugged before attaching the shade or making adjustments to the ttings.
To attach the shade (6), remove the bottom shade ring (7) from the lampholder (4). Place the brass cu (5) onto the
neck of the shade (6) and thread both onto the lampholder (4). Secure in place with the removed shade ring (7), ensure
to fully tighten.
Insert the bulb (8) into the lampholder (4) being careful not to use excessive force.
Plug the light into a 13A power socket. The light is now ready for use.
1.
2.
3.
4.
5.
If the external exible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer,
service agent or a similar qualied person in order to avoid a hazard.
This guide is provided for your safety in order to prevent the risk of re, electric shock or injury. You must read this guide in
full before using this product. We recommend that you retain this document for future reference.

Cotes Mill, Nottingham Road, Cotes, Loughborough, LE12 5TL | www.devolkitchens.co.uk v03.23
For any questions about your light, please contact our customer service team (quoting your original order number if possible)
and we will aim to respond as soon as possible. Please note that our customer service team is based in the UK and is
normally active Monday - Friday, 8:30am-5pm GMT (excluding bank holidays).
[e-mail] | 01509 606011
CONTACT
This document relates to the following products:
SKU MODEL DESCRIPTION FINISH BASE
DVHC-UK-GTLL LIBRARY LAMP DOUBLE ARM TABLE LAMP BRASS B22