
Installation |
|devolo MicroLink 56k PCI |
10
EN
햷When the driver 'PCI Modem Enumerator' has been found, confirm by
clicking Next in order to initiate installation.
햸In the subsequent dialog box, click Finish.
햹Windows detects the MicroLink 56k PCI card. Confirm this message with
Next.
햺Windows offers you two different ways of searching for drivers. Select
the 'Search for the best driver for your device (Recommended)' option and
click Next.
햻The suitable driver can be found on the devolo product CD. Activate the
'CD-ROM drive' option and deactivate all other boxes. Confirm with
Next.
햽Confirm the search results with Next. Windows will install the driver.
햾When the wizard is ready, click Finish.
햿Windows detects the 'Wave Device for Voice Modem'. Confirm this mes-
sage with Next.
The modem is entered in the Device Manager as 'MicroLink 56k PCI' and as
audio device with the 'Voice Modem Serial Wave Device' hardware compo-
nent to ensure voice functionality.
헀Windows offers you two different ways of searching for drivers. Select
the 'Search for the best driver for your device (Recommended)' option and
click Next.
헁The suitable driver can be found on the devolo product CD. Activate the
'CD-ROM drive' option and deactivate all other boxes. Confirm with
Next.
헂Finally, exit the installation by clicking Finish.
2.3.2 Installation under Windows Me
햲Restart your computer after inserting the PC card.
햳Insert the supplied devolo product CD into your CD-ROM drive.
햴Windows starts the hardware wizard and reports that new hardware has
been detected. The wizard offers you two different ways of searching for