DeWalt DW567 User manual

15 – 07 - 2000
M. COOK
Introduction Bill Of Material
DW567-----B
Exploded
Drawing
E12979
New
Parts
2
Wiring
Diagram
E12980
Product
Photograph Main Menu
DW567
ROTARY HAMMER
TYPE 3
Repair
Instructions
R11026

Introduction
DW567 TYPE 3
End Handle Rotary Hammer
Introducing Type 3 Rotary Hammers
Product improvement to reduce speed by using 24 volt hammer gearbox
components.
Parts affected are (162) Ram, (163) O-Ring, (164) Axle and (169) Hollow
Piston.
The ram diameter is reduced from 20mm down to 19mm
Launch Details
Manufacturing Plant
Service Parts Warehouse
Launch Markets
Launch Date
Spennymoor
Perth Avenue
Global
August 2000
Technical Information
CE LPA Sound Pressure
CE LWA Acoustic Power
CE Vibration
Voltage
Ampere
Power Input
Power Output
B.P.M.
Capacity
Max. Drilling Capacity – Wood
Max. Drilling Capacity – Steel
Max. Drilling Capacity – Masonry
DB(A) 96.9
DB(A) 101.9
M/S/S 8.24
230
3.4
710 W
410 W
0-5200
26mm
30mm
13mm
26mm

TYP.
3
174
127 124
124
123 115
112
125
133 134
135
136
104
129
125
110 111
103
126
128
132
109
114
105
131
106
122
101
118
119
120
130
108
121
102 816
149
148
147
146
145
156
161
160
159
155 154
158
138 139 140 141 142 143 144
175
162 163
164 165
166
167
168
169
E12979 /327108-03
153
150
151 152
29-05-00
107
176
137
171
172
173
170
157181
800
861 117
DW567
www.2helpU.com
821
831
185
184

Engineering Bill Of Material Date Created : 17/07/00
Catalogue Number : DW567-----B Type : 3
1
ITEM DESCRIPTION PART NO. QTY MARKET VARIANT
101 ARMATURE 115V 377762-04 1 T-115V
101 ARMATURE 115V 377762-04 1 T-120V
101 ARMATURE 230V 377762-03 1 T-230V
102 FIELD 373874-01 1 T-115V
102 FIELD 373874-01 1 T-120V
102 FIELD 373874-00 1 T-230V
103 SWITCH 324556-49 1
104 SWITCH REVERSE 324400-00 1
105 BRUSH 323660-00 2 M-QU
105 BRUSH 323660-00 2 T-CH-GB-QS-XW
105 BRUSH 323660-01 2 T-F9
105 BRUSH 323660-02 2 T-G3
106 PROTECTOR 401088-00 1 M-QU
106 CORD PROTECTOR 320785 1 T-CH-GB-QS-XW
106 CORD PROTECTOR 320785 1 T-F9
106 CORD PROTECTOR 320785 1 T-G3
107 CABLE SA 325229-12 1 M-CH
107 CORDSET (M/PLUG) 330060-44 1 M-GB
107 CORDSET 330081-03 1 M-QU
107 CORDSET 330097-02 1 T-F9
107 CORDSET POLARISED 325090-08 1 T-G3
107 CORDSET 324438-68 1 T-QS
107 CORDSET 330061-03 1 T-XW
108 CAPACITOR 320842-03 1 T-CH-GB-QS-XW
109 ELECTRONIC 115V 324552-04 1 T-115V
109 ELECTRONIC 324552-02 1 T-120V
109 ELECTRONIC 324552-00 1 T-230V
110 INSERT 324165-03 1
111 LEVER 323490-08 1
112 BRUSH HOLDER 323496-01 2
114 PLUG 323482-00 2
115 SPRING 872843 2
117 WASHER 949876-25 1
118 BEARING 330003-19 1
119 RING 870052 1
120 SCREW 329794-00 1
121 BAFFLE 329826-01 1
122 FIELDCASE 324188-03 1

Engineering Bill Of Material Date Created : 17/07/00
Catalogue Number : DW567-----B Type : 3
2
ITEM DESCRIPTION PART NO. QTY MARKET VARIANT
123 SCREW.TEMP 911250 2
124 SCREW 323924-02 4
125 HANDLE SA 324189-03 1
126 SCREW 911026 3
127 SCREW 330065-13 2
128 CONNECTOR 323534-00 1
129 LEAD 70MM 323635-10 2
130 CORD CLAMP 916307 1
131 SCREW 323924-08 2
132 LEAD 360MM 878846 1 T-CH-GB-QS-XW
132 LEAD 220MM 877358 1 T-F9-G3-QU
133 LEAD 220MM 877358 1 T-CH-GB-QS-XW
133 LEAD 210MM BLACK 322075 1 T-F9-G3-QU
134 LEAD 160MM BLACK 877357 1 T-CH-GB-QS-XW
134 LEAD 180MM 323635-03 1 T-F9-G3-QU
135 CHOKE SA 945402-28 1 T-CH-GB-QS-XW
135 LEAD 160MM BLACK 322076 1 T-F9-G3-QU
136 CHOKE SA 945402-27 1 T-CH-GB-QS-XW
136 LEAD 120MM BLACK 323635-02 1 T-F9-G3-QU
137 SCREW.TEMP 324044-01 4
138 CAP 323489-00 1
139 SPACER 323491-00 1
140 SPACER 323480-00 1
141 WASHER 323492-00 1
142 WASHER 871354 1
143 SPRING 871690 1
144 WASHER SA 324432-00 1
145 GEARCASE SA 329968-01 1
146 * WASHER 329907-00 1
147 BALL 7MM 870953 1
148 PIN 325880-03 1
149 SPINDLE SA 329130-01 1
150 SEAL 916323 1
151 * LEVER 327119-00 1
152 SCREW 323924-08 1
153 * COVER 328809-00 1
154 CASTING SA 327100-00 1
155 * SHIELD 328507-00 1

Engineering Bill Of Material Date Created : 17/07/00
Catalogue Number : DW567-----B Type : 3
3
ITEM DESCRIPTION PART NO. QTY MARKET VARIANT
156 * SEAL 323572-00 1
157 SPRING 323395-17 1
158 * REPAIR KIT 487047-49 1
159 DETENT 326467-00 1
160 * CAM 327094-01 1
161 FILTER 327093-00 1
162 * RAM 487068-00 1
163 O RING 323711-23 1
164 AXLE 487143-00 1
165 SHIM 327072-00 1
166 * CIRCLIP 323762-02 2
167 CLUTCH SA 327102-00 1
168 RING 327074-00 1
169 PISTON 487067-00 1
170 SPRING 323395-33 1
171 INTERSHAFT SA 327101-01 1
172 * BEARING AXIAL 324430-03 1
173 * WASHER 7 324431-03 1
174 HANDLE SIDE SA 939794-02 1
175 DEPTH STOP 875715 1
176 CIRCLIP 323762-08 1
181 SLEEVE 329211-00 1
184 PLATE 327086-00 1
185 SCREW 930553 2
800 GREASE 5KG 870889-49 1
816 BRAND LABEL 325560-00 1
821 RATING PLATE 329772-02 1 M-QU
821 RATING PLATE 329772-03 1 T-F9
831 INSTRUCTION MANUAL 329785-00 1 M-QU
831 INSTRUCTION MANUAL 329785-00 1 T-F9

Engineering Bill Of Material Date Created : 17/07/00
Catalogue Number : DW567-----B Type : 3
4
CE LPA SOUND PRESSURE DB(A) 96.9
CE LWA ACOUSTIC POWER DB(A) 101.9
CE VIBRATION M/S/S 8.24
BLOWS 0-5200
CAPACITY 26MM
VOLTAGE #1 VOLTS 230
AMPERE #1 AMPS 3.4
INPUT WATTS #1 WATTS 710
RPM #1 0-1150
VOLTAGE #2 VOLTS 115
AMPERE #2 AMPS 6.9
INPUT WATTS #2 WATTS 710
RPM #2 0-1150
* = SEE REPAIR INSTRUCTIONS

New Parts
DW567
ROTARY HAMMER TYPE 3
Part Number Part Description
329772-02 Rating Plate
329772-03 Rating Plate
Any queries please contact the European Service Support Group
Martin Cook :00441753500640
Steve Hurt :00441753500830
Martin Chadwick :00441753500540
Sean Holden :00441753500583
Please do not order any parts until a service change note is published

R11026
____________________________________
DW567 – BH26 Rotary Hammer
On re-assembly, smear parts with a little grease.
Ensure the ram (162) and seal (156) are greased.
Pack the gearbox with 60 grams (approximately 52 cc) of grease 870889-49.
Fit seal (156) with the round notches to the top.
Pull out the shield (155) before removing intershaft SA (171).
To remove the lever cover (153 / 178), use 2 small screwdrivers in the slots provided.
This will release the self-locking legs. Prise out the cover.
To remove / fit the cam (160).
Position between drill only and hammer drill position using the lever (151 / 177).
Lift the plate (158) 5 - 10 mm and then push out cam.
The washer (146) is fitted with the 'open' face toward the circlip (166).
The needle bearing (172) is fitted with the needles facing the washer (173).
Type 1 only
Repair kit (105-114-135-136) contains 2 x brushes (105), 2 x flat plug (114), 1 x choke lead (135)
and 1 x choke lead (136). This kit is only to be used for markets CH-GB-QS-XW.

TYP.
107
103
102
128
104
109
Blue
Grey
Brown
Black
Black 360mm (132)
Blue
(White)
Brown
(Black)
129 -Black (70mm)
Black 210 /220mm (133)
105 +112 +114
Black 120mm (136)
Black 160mm (135)
Black 160 /180mm (134)
105 +112 +114
3
E12980 31-05-00
108
DW567
ENGLISHFRENCHITALIAN GERMAN
BLACK NOIRNEROSCHWARZ
WHITEBLANC BIANCOWEISS
BROWNBRUN MARRONEBRAUN
BLUEBLEUBLUBLAU
RED ROUGEROSSOROT
YELLOWJAUNEGIALLO GELB
GREENVERTVERDEGRUN
ORANGEORANGEARANCIO ORANGE
GREY GRISGRIGIO GRAU
COLOURKEY
CLEAR
..
KLAR