
1. Introduction - 1 -
…………………………………………………………
1.1 Appearance Introduction - 1 -
…………………………………………
2. Safety warnings and instructions - 3 -
………………………………………
2.1 Safety signs - 3 -
…………………………………………………………
1.2 Parts list - 2 -
…………………………………………………………
2.2 Safety instructions - 3 -
…………………………………………………
3. Operation Interface - 5 -
……………………………………………………
2.3 Notes for using - 4 -
……………………………………………………
3.2 Status Indicator - 5 -
……………………………………………………
3.1 Interface View - 5 -
……………………………………………………
3.4 LCD Display - 6 -
………………………………………………………
4. Product installation - 7 -
……………………………………………………
3.3 Buttons - 6 -
…………………………………………………………
4.1 Select installation location - 7 -
…………………………………………
5. Electrical Connection - 11 -
…………………………………………
5.1 DC input terminal connection - 11 -
………………………………………
5.2 AC input terminal connection - 13 -
………………………………………
5.3 The connection of the ground line - 16 -
…………………………………
4.2 Inverter Installation - 9 -
………………………………………………
…………………………………
5.4 Max. over current protection device - 17 -
5.5 Inverter monitoring connection - 17 -
…………………………………
5.6 Installation of datalogger - 18 -
…………………………………………
5.7 Configuration of datalogger - 18 -
………………………………………
6. Startup and Shutdown - 19 -
………………………………………………
6.1 Start up the inverter - 19 -
………………………………………………
6.2 Inverter Shutdown - 19 -
………………………………………………
7. Zero-export function via energy meter - 20 -
…………………………………
7.1 Use of zero-export function - 23 -
……………………………………
7.3 Use of limiter function - 25 -
…………………………………………
7.2 Sensor Clamp(optional) - 23 -
……………………………………………
7.4 Notes while using limiter function - 26 -
……………………………………
8. General Operation - 28 -
……………………………………………………
8.1 The initial interface - 29 -
…………………………………………………
8.2 Submenus in the Main Menu - 30 -
………………………………………
8.3 System param setting - 32 -
………………………………………………
8.4 Running param setting - 33 -
………………………………………………
- 37 -
………………………………………………
9. Repair and Maintenance
- 37 -
……………………………………
10. Error information and processing
- 37 -
………………………………………………………
10.1 Error code
- 41 -
…………………………………………………………
11. Specification
8.6 Comm. param setting - 36 -
……………………………………………
- 35 -
8.5 Protect Param setting ………………………………………………
- 26 -
7.5
How to browse the load power of your PV grid-tieplant on monitoring platform?
6.3 Anti-PID Function(optional) - 19 -
…………………………………………