Diamond AQUA 35 Operation manual

Mod: CR-18S/35
Production code: AQUA 35
12/2018

1
SG03371
INSTRUCTIONS FOR USE AND
INSTALLATION DRINKING FOUNTAIN
AQUA 35
Made in France

10
SG03371
DRINKING FOUNTAIN
AQUA 35
Congratulations for the acquisition of this upmarket appliance made in France. You chose an appliance
which alloys the best technical qualities with a big user-friendliness. We wish you the biggest contentment
1. SECURITY INSTRUCTIONS
Please respect these instructions scrupulously to avoid any risk of fire, electric shock, scald or other
wounds and damage. During the use of this appliance, fundamental circumspection of security must
always be noticed, such as:
- Take into account the instructions to be systematically kept with the appliance.
- Install the appliance always in instructions respect.
- Protect the appliance from direct light of the sun, frost and humidity.
- Never leave the appliance within the reach of children or disabled persons without surveillance.
- Never move the appliance when it is working.
- Check that the appliance is definitely off before connecting it up or disconnecting it.
- Do not use the appliance for other functions than determined use.
- Do not leave the electrical cord in contact of hot surfaces.
- The appliance should not be used close to combustible materials.
- To avoid any electric shock, never plunge the cord or plug in water or quite other liquid.
- If the cord is harmed, it must be replaced by the producer, its after sale service or persons of
similar skills to avoid any risk.
- Entrust repairs only to a skilled person.
- Use only spare parts of origin.
- Before cleaning the appliance, do not forget to disconnect it.
2. CONTENTS OF CARDBOARD PACKAGING
Device: a drinking fountain
Accessories: the present note
3. CONFORMITY OS USE
Use the machine only for an unlimited supply of cold, fresh and pure water ... for offices, workshops,
canteens, hospitals, schools, stadiums, leisure parks and other public places!

11
SG03371
4. WAY OF FUNCTIONING
The drinking fountain is composed of two subsets:
* Cold: hermetic compressor, ventilated condenser, evaporator regulated through a thermostat.
* Hydraulics: a water jet tap equipped with an integrated regulator, a filler glass, a flow limiter.
Directly connected to the main water supply, this drinking fountain provide a constant supply of chilled
water (+8 to +10°C).
Glass filler Water jet tap
1
2
1
2

12
SG03371
5. FUNCTIONING / MANIPULATION
a) Installation / assembly:
- Unpack carefully the appliance from its packaging
- Place the equipment on a stable surface.
- Install the machine in a clean, ventilated place, far away from heating sources (radiators, sun
lights…)
- Never place the device near a wall or near a partition makes of combustible materials even if it is
very well isolated.
- A distance of 10 cm from the partition or the wall is considered enough.
- Remove the protective film from the appliance.
b) First starting:
First cleaning
Clean the machine before its first use (see 6. Cleaning)
Connection to the main water supply
- Connect the drinking fountain on a stop valve with a male thread 15/21.
Minimal pressure: 0.6 bar. Maximal pressure: 6 bars
- The water evacuation circuit must be conceived to avoid any return of liquid waste.
Starting
- Open the stop valve and purge the drinking fountain by pressing on the control lever of the filler
glass. Adjust the flow thanks to the visible adjusting screw on the back part of the fountain.
- Adjust the flow of the water jet tap to have a suitable trajectory.
- Switch on when there is no more air in the circuit.
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values indicated on
the descriptive plate.
- Check that neither the cord nor the plug are damaged
- Make sure that every control knob is positioned on 0.
- Unwind completely the electric power cable and connect it in a normalised plug with the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly on the electricity
network, confide its connection to a qualified person
c) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and confide any technical
operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him the complete reference
of your device (commercial name, type and serial number). This information appears on the visible
descriptive plate behind the device.

13
SG03371
6. CLEANING AND MAINTENANCE
Disconnect the device.
- Clean regularly the metallic parts after each use by using only use non-abrasive products, warm
water and wash liquid: avoid the abrasive towelling. Rinse your device with a wet sponge and dry it
with a soft cloth.
- Never clean the device under a water jet, the infiltrations would risk to damage it in an irreparable
way.
- Never immerse the cord or the plug in the water or quite other liquid to avoid any electric shock.
- Never use abrasive product to clean the stainless steel basin
- Proceed to a regular maintenance of the machine (see 11. Maintenance recommendations)
7. TECHNICAL SPECIFICATIONS
Model
AQUA 35
Outside dimensions
400 x 385 x 1245 mm
Weight
32 Kg
Compressor
0,28 kW
Gas
R 134 A
Water temperature
+8° à +10° C
Current
2.5 A
Voltage
220-240 V ~
Wires colours correspondence Phase Brown / Black / Grey
Neutral Blue
Earth Yellow-Green
8. NORMS AND LEGALS DISPOSALS
The device is conform to:
IEC/EN 60335-1
IEC/EN 60335-2-89
EN 55014-1 + 55014-2
EN 61000-3-2 + 61000-3-

14
SG03371
9. ELIMINATION OF THE ELECTRIC AND ELECTRONIC WASTE
The device respects the directives:
2002/96/CE (DEEE) N°34270064800021
2002/95/CE (ROHS)
2066/95 CE
2004/108 CE
Reach rule
Never put the device among household waste.
The device must be put down in a centre of recycling for the electric equipments.
The materials of the device are indeed reusable. By eliminating correctly the electric and electronic
wastes, the recycling and quite other shape of re-use of worn equipments, you participate in a significant
way in the environmental protection.
For any information about the collection of electric and electronic waste, please contact your distributor.
10. GUARANTEE
Conditions of guarantee
The guarantee applicable to any device is the commercial guarantee of the distributor or the retailer.
Please contact the store where you bought your device to know the precise conditions.
The guarantee grants no right for damages.
The dispositions which follow are not exclusive of the profit of the legal guarantee planned by articles 1641
and following ones of the Civil code relative to the defects and the latent defects.
Exclusion clauses of the guarantee
Bad installation and bad maintenance, in particular if they do not respect current regulations or
instructions appearing in this user guide.
Cannot benefit from the guarantee the repairs required as a result of false operations, of inappropriate
use, of carelessness or of excess loads of the device, as well as those resulting from variations of the
power supply, over tension or from defective installations.
The damage due to shocks, bad weather is not flatware by the guarantee. The material travels at the risks
of the user; in case of delivery by carrier, the consignee has to have reservations towards the carrier
before any delivery of the device.
The guarantee comes to an end in case of intervention, of repair, of modification by no qualified persons,
or of use in inappropriate purposes.

15
SG03371
11. MAINTENACE RECOMMENDATIONS
These data are extracted from the guide for the control of water quality in hospital complexes (RHC
October 2000)
Technical maintenance (Machine unplugged)
Method
Frequency
Observations
Visual inspection
and verification of
the good working
Once a year at
least
Dusting of the motor
and the protection
grid
Changing the filter
(if the machine has
one)
According the
manufacturer
recommendations
If the manufacturer recommends to change the filter according to the
water volume, it is essential to install a water meter
Replacement of
parts (filter,
pipes…)
In case of wear or
according to the
manufacturer
recommendations*
~ Multiplication of the bio film inside the connection pipe of the drinking
fountain to the main water supply.
~ Install opaque pipes and the shortest possible .
~ Cleaning and disinfection of the new parts (see below)
Cleaning, descaling
and disinfection of
the parts of the
drinking fountain
At least once a
year and in case of
abnormal results
when control
Disassemble the drinking fountain
Descaling:
~ Make the descaling product circulate inside the evaporator ~ Take off
the parts that can be dismantled and immerse them in the descaling agent
(time of contact according to the recommendations of the product
manufacturer)
~ Rinse the circuit during 5 minutes after reassembly of the fountain
Disinfect:
~ Inject in the circuit the disinfecting product (possibly by means of a
pump), until flow at the other end
~ Time of contact according to the recommendations of the product
manufacturer
~ Inject again the disinfecting product in the circuit until flow at the other
end
~ Rinse abundantly
Control sampling before starting up again.
* Plan a change of filter after each stop of more than 8 days

16
SG03371
Preventive cleaning (Machine on)
Method
Frequency
Observations
Verification of
correct operation
Everyday
~ Check that the water is fresh
~ If the water has stained, do not use it and contact the technical services
Draining
Everyday
~ In the morning, before stuffing the first pitcher.
~ After not using more than 24 hours.
~ The duration of the purge depends on the length of the pipe in which
the water stagnates during the night. In practice, the purge is performed
when the water is at the temperature of use.
Surfaces extérieures, grills et cuvette
Cleaning
Everyday
Outdoor surfaces :
~ Cleaning with a detergent
~ Rinse
~ Avoid the use of abrasive products
Grid and bowl :
~ Cleaning with a detergent
~ Rinse
~ Clean with a rag and some scouring cream
~ Rinse to remove all traces of product

17
SG03371
Preventive cleaning (Machine on)
Method
Frequency
Observations
Descaling
Trimestral
~ Use a descaling agent
~ For the little scaly zones, apply the product with a moistened and
soaked soft clothe.
~ For the very scaly surfaces, apply directly the product to walls to be
treated.
~ Let act the product according to the recommendations of the
manufacturer.
~ Rinse to eliminate any trace of product
Stainless steel surfaces, glass filler and basin
Cleaning and
disinfection
Cleaning and
disinfection
2 methods can be used
* 1st method:
~ Cleaning with a detergent
~ Rinse
~ Disinfection with chlorinated water at 6° chl, time of contact 15 min
~ Rinse
* 2nd method:
~ Cleaning and disinfection with a “detergent and dissection” solution;
time of contact according the recommendations of the product
manufacturer.
~ Rinse
Pipes and siphon
Cleaning and
disinfection without
disassembling
Cleaning and
disinfection
~ Pour chlorinated water at 12° chl. Inside the siphon
~ Contact 15 min
~ Rinse by opening the tap
~ Never mix chlorinated water with a descaling agent (risk of chlorine
gas emanation).

18
SG03371
Vue éclatée
75060
75064SE
75070
75061
75056SE
CORDON
A12007
SB10006
SB10014
SB10013
SH03011_1200
75057
SA03046
SA06043
SB10008
SH03018_1500
SB04066
SA13009 x4
G08102
SH03017
SB04070
SB10019
SB10021
SB10021
SB10030
SA03073
SF01057
SA03012
SA03090
75076
75058EV
SB04064
SE02119
SB04065
Date :
24/10/2018 Indice
A
Dessiné par :
R.L. Approuvé par :
AQUA 35
DT196 Date :
24/10/2018

19
SG03371
Nomenclature
J.Godéré
CODE QTE PIECE SPARE PART
75056SE 1 S/E CEINTURE FRP 35/80/150 CASIN G FRP 35/80/150
75057 1 GRILLE CEINTURE FRP 35/80/150 CASIN G GRID FRP 35/80/150
75058EV 1 BOITE MOUSSAGE FRP 35 BOX CASIN G FRP 35
75060 1 ARRIERE CEINTURE FRP 35/80/150 CASIN G REAR FRP 35/80/150
75061 1 CUVETTE IN TERIEUR FRP 35/80/150 INSIDE CONTAINER FRP 35/80/150
75064SE 1 S/E SUPPORT ROBINET FRP 35 TAP HOLDER FRP 35
75070 1 GRILLE CUVETTE FRP 35 CONTAINER GRID FRP 35
75076 1 PARAPLUIE UMBRELLA
A12007 1 PASSE FIL PZ DA120 CABLE SHOE PZ DA120
CORDON 1 CORDON CORD
G08102 1 CLE ALLEN H4 KEY ALLEN H4
SA03012 1 MOTEUR VENTILATEUR MOTOR VENTILATOR
SA03046 1 CONDENSEUR FONTAINE FOUNTAIN CONDENSOR
SA03073 1 HELICE Diam 170 mm POUR MOTEUR FAN Diam 170 mm FOR MOTOR
SA03090 1 COMPRESSEUR VITRINE TAPAS COMPRESSOR VITRINE TAPAS
SA06043 1 THERMOSTAT FONTAINE THERMOSTAT FOUNTAIN
SA13009 4 VERIN H EXAGONE M8X20 VH 1000 HEXAGON JACK M8X20
SB04064 1 REGULATEUR DE DEBIT FONTAINE FLOW REGULATION
SB04065 1 VIS DE REGLAGE DU REGU LATEUR REGULATOR ADJUSTMENT SCREW
SB04066 1 DESHYDRATEUR DEHYDRATOR
SB04070 1 VALVE DE CHARGE 888 1/4 CHARGING VALVE 888 1/4
SB10006 1 ROBINET COL DE CYGNE FONTAINE WATER FILTER TAP DRIN KIN G FOU NTAIN
SB10008 1 ROBINET JAILLISSANT FON TAINE SPURT TAP FOUNTAIN
SB10013 1 Union Dble réducteur 8x6 PIPE FITING 8x6
SB10014 1 "T" UNION 3x6 FRP 35 L "T" LINK 3x6 FRP 35 L
SB10019 1 FILTRE DE FONTAINE FILTER OF FOUNTAIN
SB10021 2 RAC CORD 8 x 3/8 UNION 8 x 3/8
SB10030 1 BONDE + JOIN T FRP /M 35 BONDE + JOIN T FRP /M 35
SE02119 1 JOINT TORIQUE 2.2 x 1.6 NITRILE NB SEAL 2.2 x 1.6
SF01057 1 GRILLE SUPPORT MOTEUR MOTOR HOLDER GRID
SH 03011_1200 1 TUYAU RILSAN 4x6 FANTAISIE PIPE 4x6
SH 03017 1 TUYAUX ARRIVEE D'EAU fontaine WATER SUPPLIY RFP
SH 03018_1500 1 TUYAU D'ECOULEMENT FONTAINE WATER OUTLET
Date :
24/10/2018 Indice
A
Dessiné par :
R.L. Approuvé par :
AQUA 35
DT196 Date :
24/10/2018

20
SG03371
Schéma électrique
Date :
24/10/2018 Indice
A
Dessiné par :
R.L. Approuvé par :
AQUA 35
DT196 Date :
24/10/2018