digi-tech GNX4 Instruction Manual

GNX4 Sof twar e Rele ase No tes V ersion 1 . 3
Reduced display flicker under CPU loading.
Fix for audio pop when changing Talker types.
Fix for not being allowed to enter PATTERN/FILE from Preset Mode
using footswitches.
Eliminated timeout of PATTERN/FILE (flashing) mode. User must now
double press footswitches to exit this mode.
Treadle min and max points widened upon entering preset to allow more
precise control of pedal parameters by minimizing dead space.
Fix for speaker compensation display after being changed in bypass or
tuner mode.
Fix for LFO2 not working when LFO1 is set to a high frequency.
Fix for Spread Delay not correctly loading on preset change.
Improved pitch down shifting in Whammy/IPS/Mod FX modules.
Fix for not storing the current preset number when doing a preset
store operation while being connected to X-Edit.
Fix for X-Edit not getting notification of assignment unlink.
Minimized the delay time (to lowest possible) from the moment the
Looper RECORD button or footswitch is pressed until the track
begins recording.
Fix for UNDO last loop track causing loop of zero length.
Took out Recorder F FWD and REWIND functions when MP3 backing
track is selected.
Disable MP3 demo Play and Stop footswitches. The demo can only be
controlled from the Recorder Control panel transport buttons.
Fix for multiple GNX4s connected to a PC with the CF Storage mode
enabled which was causing a crash.
Fix for speaker compensation always affecting the recorded guitar
signal. The signal now follows the position of the XLR speaker
compensation switch.
Fix for REAMPUSB function. Removed the dry signal from being mixed
back in.
Added new demo mode code for point of purchase display units (does
not effect standard production units).
Fix for staying on Level or Pan parameter after changing song.
Fix for CF Busy lockup when reading MP3 or MIDI folder.
Fix for CPU stack problem when sequential FFWD or REWIND buttons
caused a stuck on READING compact flash card condition.
.