Digiality IR-200 User manual

REMOTE CONTROL EXTENDER
OWNERS MANUAL
Made in China

LOCATION OF CONTROLS
Transmitter Side Receiver Side
IR Probe
DC Power
DC Power
Transmitter and
Receiver Front
Infrared Remote
Control Antenna
Remote Control
Indicators &
IR Transmitter/Receiver
Accessories
DC 12 V AC 220V or 240V
A
daptor x2 Infrared Extender X 1

CAUTION:
This equipment has been tested and found to comply with CE regulation.
These regulations are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with this manual, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
situation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
 Reorient or relocate the receiving antenna
 Increase the distance between the interfered equipment and the receiver
 Connect the interfered equipment into an outlet on a circuit which is
different from that the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT SAFETY PRECAUTIONS
 To prevent fire or shock hazard, do not submerge or expose this
product to water
 To avoid electric shock, do not open these units. The IR-200
contains no user serviceable parts. Attempting this will void the
warranty
 Use only the power supply provided with the IR-200
 Do not overload wall outlets or extension cords.
 If you are experiencing difficulty with this products, do not attempt to
service it yourself. Please call your vendor for assistance.

Product Description
The IR-200 Wireless Infrared Remote Control Extender enables
you to extend the range of your present Infrared Remote Control
so that you canoperate VCRs, stereos, Cable Converter, Satellite
receivers, etc. Virtually any where within your home.
Unlike ordinary remote controls which are only effective in close
Range," line of sight" use, The IR-200 uses a radio frequency
enabling it to operate through walls, doors, around corners, etc.
Applications
The Remote operation of electronics products that utilize IR
(Infrared) remote control technology such as:
‧Satellite Receivers
‧Television
‧VCR's (Video Cassette Recorders)
‧CDs (Compact Disc)
‧DVD's (Digital Video Disc)
‧LDP's (Laser Disc Players)
‧Cable Converter Boxes
‧Audio / Hi-Fi Stereo Systems
‧Wireless Video Sender Systems
‧Any (IR) Remote Controlled Devices
"Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device."

APPLICATION DIAGRAM
1. Stereo system with remote control: IR Signal
RF Si
g
nal
IR-200
Receiver
Probe Wire to Extension Speaker
Stereo Wall
IR Remote
Control
IR-200
Transmitter
2. DSS / Satellite Receiver with remote control:
2nd TV
DSS or Satellite
Receiver Wall
IR-200
Receiver IR Remote
Control
IR-200
Transmitter

Installation & Operation Guide
Receiver
Picture 1 Picture 2
Working with extender probe
A
ntenna
Power
Adaptor
(Using IR )
Keep Vertical
Make sure the IR probe is pointing toward
IR sensor receiving Window with proper position
(about within 1M and working angles+/-15°).
Picture 3 Picture 4
Working without
extender probe Working without extender probe
Side View
7.6M
8M
0.4
Not less than 0.4M and no more than M8
Working Angle not more than +/- 15°
Working Angle not more
than +/- 15°

Transmitter Picture 6
Picture 5
Working Angle not
more than +/- 15°
A
ntenna
Power
Adaptor
Keep Vertical Remote Control
Picture 7
A
ntenna
5.7M
6M
Distance Not less than 0.3M and no more than 6M
Working Angle not more than +/- 15°

Care and Maintenance
‧Keep the IR-200 Remote Extender dry. If it gets wet,
wipe it dry immediately.
‧Use and store the IR-200 only in normal temperature
environments. Extreme temperature can shorten the life of
electronic devices
‧Handle the IR-200 gently and carefully. Dropping it can
damage the circuit board and can cause it to work improperly.
‧Keep the IR-200 away from dust and dirt, which can
cause premature wear of parts.
‧Wipe the IR-200 with a damp cloth occasionally to keep
it looking new. Do not use harsh chemicals, cleaning solvents,
or strong detergents.
Specifications
Operating Voltage ...................................230 or 240 VAC, 60Hz/
DC 12V, 150mA
Power Consumption (pair).........................................4 Watts Max
Transmission Frequency......………………..433.9MHz +/-250KHz
Power Gain.......................................................................10dBM
Effective operating range.............................................about 35M
(clear line of sight)
Infrared Receiver Section: Tuning Frequency..................38 KHz
Infrared Emitter Section: Carrier Frequency(R/C)............38 KHz