DigiPos WD-2049 User manual

Vacuum Fluorescent
Customer Display
MODEL: WD-2049
Version: 1.14

WD-2049 customer display
1
INDEX
1. FEATURES.........................................................................................................3
2. GENERAL SPECIFICATIONS.........................................................................4
3. UNPACKING AND CHECKING THE PARTS................................................5
4. BASE PCB INTERFACE...................................................................................6
4.1 RS-232 INTERFACE CONNECTOR (ON THE BOTTOM OF THE BASE SECTION) ..........6
4.2 POWER SUPPLY CONNECTORS............................................................................6
4.3 CN5 /TYPE:DB25/F TOGETHER WITH SIGNALS OF RS-232C..............................6
4.4 RS232C LINK TO PC/HOST CONNECTOR (CN5).................................................7
4.5 RS232C LINK TO PRINTER CONNECTOR (CN3)....................................................7
4.6 RS232C LINK TO DISPLAY PANEL (CN4)............................................................7
5. USB BASE INTERFACE ...................................................................................8
5.1 USB INTERFACE CONNECTOR (ON THE BOTTOM OF THE BASE SECTION)...............8
5.2 POWER SUPPLY CONNECTORS............................................................................8
5.3 USB INPUT PORT LINK TO PC/HOST USB CONNECTOR (CN5)............................9
5.4 RS232C LINK TO PRINTER CONNECTOR (CN3)....................................................9
5.5 RS232C LINK TO DISPLAY PANEL (CN4)............................................................9
6. DIP SWITCH SETTING..................................................................................10
6.1 COMMAND TYPE SELECTION ............................................................................10
6.2 BAUD RATE SELECTION....................................................................................10
6.3 PARITY CHECK SELECTION...............................................................................10
6.4 INTERNATIONAL CHARACTER SET SELECTION ...................................................11
6.5 SELF-TEST &DEMO FUNCTION SELECTION........................................................11
7. COMMAND......................................................................................................12
7.1 CD5220 STANDARD MODE COMMAND LIST.....................................................12
7.2 EPSON ESC/POS COMMAND LIST .....................................................................15
8. CHARACTER SET ..........................................................................................18
8.1 USA, STANDARD CHARACTER SET (20H –7EH) ................................................18
8.2 INTERNATIONAL CHARACTER SETS..................................................................19
8.3 PAGE 0(PC437: USA, STANDARD EUROPE)(80H –FFH) ................................20
8.4 PAGE 1(KATAKANA)(80H –FFH)..................................................................21
8.5 PAGE 2(PC850: MULTILINGUAL)(80H –FFH)................................................22
8.6 PAGE 3(PC860: PORTUGUESE)(80H –FFH) ...................................................23
8.7 PAGE 4(PC863: CANADIAN-FRENCH)(80H –FFH) .........................................24
8.8 PAGE 5(PC865: NORDIC)(80H –FFH) ...........................................................25
8.9 PAGE 6(SLAVONIC)(80H –FFH)....................................................................26
8.10 PAGE 7(RUSSIA)(80H –FFH) ......................................................................27
8.11 PAGE 19 (PC858 EURO)(80H –FFH)............................................................28
8.12 PAGE 16 (WPC1252) (80H –FFH)................................................................29
8.13 PAGE 12 (GREEK)(80H –FFH) .....................................................................30

WD-2049 customer display
2
APPENDIX A: CUSTOMER DISPLAY DIMENSION ......................................31
APPENDIX B: DISPLAY BASE DIMENSION ..................................................31
APPENDIX C: DISPLAY MODULE DIMENSION ...........................................32
APPENDIX D: BASE ASSEMBLING.................................................................33
APPENDIX E: PASS THROUGH INSTALLATION GUIDE............................34

WD-2049 customer display
3
1. FEATURES
1. Data can be displayed on 20 columns x 4 lines.
2. Blue-green color and large character are easy to eye.
3. The display panel is adjustable to provide the best view angle.
4. Provide 2 poles for base position installation.
5. The DIP-switches setting emulate commands mode, baud rate and
international characters.
6. CD5220/EscPOS emulation command sets.
7. User-defined characters can be downloaded ( for EscPOS /CD5220
command).
8. Display area can be controlled by window function ( for EscPOS
command only).
9. Provides an interface based on RS-232C, and RS232C baud rate
from 9600 to 115200 bps.
10. Provides pass through function, so both printer and display can be
connected to the same port (ref. Appendix E).
11. Multi power connectable and wide range power input (+9 – +35 VDC).

WD-2049 customer display
4
2. GENERAL SPECIFICATIONS
NO ITEM Descriptions
1 Display method VFD display (blue green)
2 Number of character 20 columns x 4 lines
3 Brightness 500 cd/m2
4 Character type 5 x 7 dot matrix
5 Character size 9.0 x 5.25mm
6 Font 96 alphanumeric 13 international
1 user define 11 code page
7 Command and driver ESC/POS and OPOS
8 MTBF 25,000 hours
9 View angle 0 ~ 45 degree
10 Rotate angle 270 degrees (Max.)
11 Power supply +9 ~ +35 VDC
12 Power Consumption 6W (Max.)
13 Interface RS-232C and USB
14 Gross weight 1.8 Kg
15 Operating temperature 0 ~ 45℃
16 Operating Humidity 10 ~ 90 %RH
17 Storage Temperature -10 ~ 50℃
18 Storage Humidity 10 ~ 90 %RH
Table 2-1

WD-2049 customer display
5
3. UNPACKING AND CHECKING THE PARTS
Parts list:
(1) Display Module.
(2) Nut.
(3) Knob.
(4) Neck.
(5) Display Cable.
(6) Long Pole
(7) Short Pole
(8) Base Housing.
(9) Base PCB.
(10) Power Adapter (optional)
(11) AC Cord.
(12) RS-232C Cable.
(13) Plate
(1)
(4)
(3)
(6)
(7)
(8)
(10)
(9)
(12)
(2)
(13)
(11)
(5)

WD-2049 customer display
6
4. Base PCB Interface
4.1 RS-232 Interface connector (On the bottom of the base
section)
CN1,CN6: 24VDC power supply pass-through connects
CN2: Power input connector from adapter
CN3: RS-232C connect to printer
CN4: Connect to display panel
CN5: RS-232C connect to PC/Host
4.2 Power Supply Connectors
The variable power input which are available on base connectors, but only
if one connector can be selected for power input, the description as below:
4.2.1 CN2 / Type: DC jack (5.5/2.1)
Pin assignment
No Signal
+ Vin1
- GND
Table 4-1
4.2.2 CN1,CN6 / Type: Miniature jacks quick lock 3 pin
Table 4-2
4.3 CN5 / Type: DB25/F together with signals of RS-232C
Table 4-3
Pin assignment
No Signal
1 Vin2
2 GND
Pin assignment
No Signal
16,25 Vin3
7 GND

WD-2049 customer display
7
4.4 RS232C link to PC/HOST connector (CN5)
Type: DB25/F
Pin assignment
No Signal Direction Function description
2 TXD From printer to PC/Host Printer status data
3 RXD From PC/Host to display Receive data
4,20 DTR From display to PC/Host Display/printer ready signal
6 DSR From PC/Host to printer PC/Host ready signal
7 GND - Signal ground
16,25 Vin3 From PC/Host to display Power input
Table 4-4
4.5 RS232C link to printer connector (CN3)
Type: DB9/M
Pin assignment
No Signal Direction Function description
2 RXD From printer to PC/Host Printer status data
3 TXD From display to printer Printing data
5 GND - Signal ground
4,7 DTR From PC/Host to printer PC/Host ready signal
6 DSR From printer to display Printer ready signal
9 Vin2 From Hosiden to printer Power through to printer
Table 4-5
4.6 RS232C link to display panel (CN4)
Type: RJ45/8P/8C
Pin assignment
No Signal Direction Function description
1,2 Vin - Power 5VDC or 9~45 VDC
3,4 GND - Signal ground
5 DSR From Printer to Display Printer ready signal
6 DTR From Display to PC/Host Display/Printer ready signal
7 RXD From PC/Host to Display Display/Printing data signal
8 TXD From Display to Printer Printer status data signal
Table 4-6

WD-2049 customer display
8
5. USB BASE INTERFACE
5.1 USB Interface connector (On the bottom of the base section)
CN1,CN6: 24VDC power supply pass-through connects
CN2: Power input connector from adapter
CN3: RS-232C connect to printer
CN4: Connect to display panel
CN5: USB input
5.2 Power Supply Connectors
There are variable power inputs which are available on base connector,
but only one connector can be selected for power input function, the
description as below:
5.2.1 CN1,CN6 / Type: Miniature jacks quick lock 3 pin
Pin assignment
No Signal
1 Vin2
2 GND
Table 5-1
5.2.2 CN2 / Type: DC jack (5.5/2.1)
Pin assignment
No Signal
+ Vin1
- GND
Table 5-2

WD-2049 customer display
9
5.3 USB input port link to PC/HOST USB connector (CN5)
Type: USB Pin assignment
No Signal Direction Function description
1 V+ 5V From PC/Host USB power 5 VDC
2 D- Data signal -
3 D+ Data signal+
4 GND - Signal ground
Table 5-3
5.4 RS232C link to printer connector (CN3)
Type: DB9/M Pin assignment
No Signal Direction Function description
2 RXD From printer to PC/Host Printer status data
3 TXD From display to printer Printing data
5 GND - Signal ground
4,7 DTR From PC/Host to printer PC/Host ready signal
6 DSR From printer to display Printer ready signal
9 Vin2 From Hosiden to printer Power through to printer
Table 5-4
5.5 RS232C link to display panel (CN4)
Type: RJ45/8P/8C Pin assignment
No Signal Direction Function description
1,2 Vin - Power 5VDC or 9~45 VDC
3,4 GND - Signal ground
5 DSR From Printer to Display Printer ready signal
6 DTR From Display to PC/Host Display/Printer ready signal
7 RXD From PC/Host to Display Display/Printing data signal
8 TXD From Display to Printer Printer status data signal
Table 5-5

WD-2049 customer display
10
6. DIP SWITCH SETTING
6.1 Command type selection
SW1 SW2 Command type
OFF OFF ESC/POS
ON OFF CD5220
Table 6-1
6.2 Baud rate selection
SW3 SW4 Baud rate (bps)
OFF OFF 9600
ON OFF 19200
OFF ON 38400
ON ON 115200
Table 6-2
6.3 Parity check selection
SW5 SW6 Parity & data bites
OFF OFF None-parity , 8 data bites
ON OFF Even-parity , 8 data bites
OFF ON Even-parity , 7 data
ON ON Software Setting
Table 6-3
ONDIP
1 2 3 4 5 6 7 8 9 10 1112

WD-2049 customer display
11
6.4 International character set selection
SW7 SW8 SW9 SW10 Character set Code table ( 80H-FFH)
OFF OFF OFF OFF U.S.A. PC-437(USA&Europe)
ON OFF OFF OFF FRANCE PC-858(Euro)
OFF ON OFF OFF GERMANY PC-858(Euro)
ON ON OFF OFF U.K. PC-858(Euro)
OFF OFF ON OFF DENMARK I PC-858(Euro)
ON OFF ON OFF SWEDEN PC-858(Euro)
OFF ON ON OFF ITALY PC-858(Euro)
ON ON ON OFF SPAIN PC-858(Euro)
OFF OFF OFF ON JAPAN Katakana
ON OFF OFF ON NORWAY PC-858(Euro)
OFF ON OFF ON DENMARK II PC-858(Euro)
ON ON OFF ON U.S.A Slavonic
OFF OFF ON ON U.S.A Russia
ON OFF ON ON U.S.A PC860 (Portuguese)
OFF ON ON ON U.K. Greek
ON ON ON ON Software Setting
Table 6-4
6.5 Self-test & demo function selection
SW11 Function
ON Enable
OFF Disable
Table 6-5

WD-2049 customer display
12
7. COMMAND
7.1 CD5220 Standard Mode Command List
Command Code (hex) Function description
ESC DC1 1B 11 Overwrite mode
ESC DC2 1B 12 Vertical scroll mode
ESC DC3 1B 13 Horizontal scroll mode
ESC QA ....CR 1B 51 41 data x m 0D
Set the string display mode,writed string
to upper line
. m ≦20
ESC QB ....CR 1B 51 42 data x m 0D Set the string display mode, writed string
to lower line
. m ≦20
ESC QC ....CR 1B 51 42 data x m 0D Set the string display mode, writed string
to lower line
. m ≦20
ESC QD ....CR 1B 51 42 data x m 0D Set the string display mode, writed string
to lower line
. m ≦20
ESC QE ....CR 1B 51 44 data x m 0D Upper line message scroll continuously
. m ≦40
ESC [ D 1B 5B 44 Move cursor left
BS 08 Move cursor left
ESC [ C 1B 5B 43 Move cursor right
HT 09 Move cursor right
ESC [ A 1B 5B 41 Move cursor up
ESC [ B 1B 5B 42 Move cursor down
LF 0A Move cursor down
ESC [ H 1B 5B 48 Move cursor to home position
HOM 0B Move cursor to home position
ESC [ L 1B 5B 4C Move cursor to left-most position
CR 0D Move cursor to left-most position
ESC [ R 1B 5B 52 Move cursor to right-most position

WD-2049 customer display
13
Command Code (hex) Function description
ESC [ K 1B 5B 4B Move cursor to bottom position
ESC [ R 1B 5B 52 Move cursor to right-most position
ESC l x y 1B 6C x y Move cursor to specified position
1 ≦x≦20 ,row position
1 ≦y≦4 ,column position
ESC @ 1B 40 Initialize display
ESC W s x1
x2 y 1B 57 1 x1 x2 y Set or cancel the window range at horizontal scroll mode
1≦x1≦x2≦20 , row position
1≦y≦2 , column position
CLR 0C Clear display screen , and clear string mode
CAN 18 Clear cursor line, and clear string mode
ESC * n 1B 2A n
Brightness adjustment
1≦n≦4
ESC & s n m
[a (P1..pa)]x
(m-n+1)
1B 26 1 n m
[a(p1..pa)]x (m-n+1)
Define download characters.
32 < n ≦m ≦255
1 ≦a ≦5
p1..p5 =row1..row5
ESC ? n 1B 3F Deletes download characters.
ESC % n 1B 25 Select/cancel download character set.
ESC _ n 1B 5F n Set cursor on/off
.n = 1 , cursor off
.n = 2 , cursor on
ESC f n 1B 66 n Select international fonts set, refer *2
ESC c n 1B 63 n Select code, refer *3
ESC = n 1B 3D n Select peripheral device, display or printer
.n bit 0 = 1 select printer
.n bit 1 = 1 select display
Table 7-1

WD-2049 customer display
14
*2: The parameter of international fonts set control by command “ESC f n”
Parameter n International Font Set
“A” U.S.A.
“G” Germany
“I” Italy
“J” Japan
“U” U.K.
“F” France
“S” Spain
“N” Norway
“W” Sweden
“D” Denmark I
“E” Denmark II
“L” Slavonic
“R” Russia
Table 7-2
*3: The parameter of the code table control by command “ESC c n”
Parameter “n” International font set
“A” Compliance with ASCII code
“J” Compliance with JIS code
“L” Compliance with SLAVONIC code
“R” Compliance with RUSSIA code
Table 7-3

WD-2049 customer display
15
7.2 EPSON Esc/pos command list
Command Code (hex) Function description
HT 09 Move cursor right.
BS 08 Move cursor left.
US LF 1F 0A Move cursor up.
LF 0A Move cursor down.
US CR 1F 0D Move cursor to right-most position.
CR 0D Move cursor to left-most position.
HOM 0B Move cursor to home position.
US B 1F 42 Move cursor to bottom position.
US $ x y 1F 24 x y Move cursor to specified position.
1 ≦x ≦20
1 ≦y ≦4
CLR 0C Clear display screen.
US X n 1F 58 n Brightness adjustment.
1 ≦n ≦4
US E n 1F 45 n Blink display screen.
0 ≦n ≦255
ESC @ 1B 40 Initialize display.
ESC t n 1B 74 n Select character code table.
0 ≦n ≦7, 12, 16, 19, 40
Refer*2
ESC R n 1B 52 n Select international character set.
0 ≦n ≦14
US r n 1F 72 n Select/cancel reverse character.
0 ≦n ≦10
Refer*1
US MD1 1F 01 Specify overwrite mode.
US MD2 1F 02 Specify vertical scroll mode.
US MD3 1F 03 Specify horizontal scroll mode.
ESC & s n m
[a(p1..pa)]x
m-n
1B 26 1 n m
[a(p1..pa)]x
m-n
Define download characters.
32 < n ≦m ≦255
1≦a ≦5
p1..p5 =row1..row5

WD-2049 customer display
16
Command Code (hex) Function description
ESC ? 1B 3F Delete downloads characters.
ESC % 1B 25 Select/cancel download character set.
ESC = n 1B 3D n
Select peripheral device.
.n bit 0 = 1 select printer
.n bit 1 = 1 select display
US : 1F 3A Set starting/ending position of macro definition.
US ^ n m 1F 5E n m Execute and quit macro.
0 ≦n≦255 , 0 ≦m≦255
US @ 1F 40 Execute self-test.
US T h m 1F 54 h m Display time
0 ≦h≦23 , 0≦m≦59
US U 1F 55 Display time continuously
US v n 1F 56 n Status confirmation by DTR signal
0 ≦n≦1 Table 7-4

WD-2049 customer display
17
*REMARK
*1 Select international character set
n International font
0 U.S.A.
1 France
2 Germany
3 U.K.
4 Denmark I
5 Sweden
6 Italy
7 Spain
8 Japan
9 Norway
10 Denmark II
Table 7-5
*2 Select character code table
n Code table
0 Page 0, (PC437,USA standard Euro.)
1 Page 1,(Katakana for Japan)
2 Page 2,(PC850,Multilingual)
3 Page 3,(PC860, Portuguese)
4 Page 4,(PC863,Canadian-French)
5 Page 5,(PC865,Nordic)
6 Page 6,(Slavonic)
7 Page 7,(Russian)
19 Page 19,(PC858, Euro)
16 Page 16,(WPC1252.)
12 Page 12,(Greek)
Table 7-6

WD-2049 customer display
18
8. CHARACTER SET
8.1 USA, standard character set (20h – 7Eh)
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
20H
30H
40H
50H
60H
70H
Table 8-1

WD-2049 customer display
19
8.2 International Character Sets
Country\Hex 23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7E
U.S.A
France
Germany
U.K
Denmark I
Sweden
Italy
Spain
Japan
Norway
Denmark II
Slawie
Russia
Table 8-2