Digital Devices BS-801BT User manual

BS-801BT USER MANUAL
Digital Bathroom Scale
www.digitaldevices.com.au
Using Bluetoot Wireless Tec nology
Pairing Instructions
iP one:
Digital Devices Pty Ltd
PO Box 6384
University of New Sout Wales
Sydney NSW 1466 Australia
Telep one: [phone] 2013.11.17
Press t e button on t e back of t e scale to enter configuration mode. Press t e button
again to c eck t at are selected. If not, press t e button for 3 sec to
c ange it.
1.
2.
3.
Android:
Press t e button on t e back of t e scale to enter configuration mode. Press t e button
again to c eck t at are selected. If not, press t e button for 3 sec to
c ange it.
1.
Windows 7:
Press t e button on t e back of t e scale to enter configuration mode. Press t e button
again to c eck t at are selected. If not, press t e button for 3 sec to c ange it.
1.
2.
3.
Tap “Scale BS-801BT” from a list of devices t at ave been found. A message will pop
up confirming successful pairing after a w ile.
Searc for Bluetoot devices from an iP one by tapping “Home Screen” > “Settings” >
“General” > “Bluetoot ” > “On”.
2.
3. Tap “Scale BS-801BT” from a list of devices t at ave been found. W en a 6 digit
passkey is displaying on bot t e Android device and t e scale, press t e button on t e
scale and tap t e "YES" button on t e Android device to continue t e pairing operation.
Searc for Bluetoot devices from an Android device by tapping “Settings” > “Bluetoot ”
> “Searc for devices”.
Searc for Bluetoot devices from your PC by clicking “Start” > “Control Panel” >
“Hardware and Sound” > “Devices and Printers” > “Add a device”.
Select “Scale BS-801BT” from a list of devices t at ave been found by your PC. W en
asked to select a pairing option, select “Let me c oose my own passkey” and t en enter
t e passkey “0000”.
A message will pop up confirming successful pairing. Click t e Bluetoot icon in t e
Windows task bar > “Open Settings” > “COM Ports” to find out t e incoming and outgoing
COM ports mapped to t e scale w en using SPP profile.
4.

INSTALLING OR REPLACING BATTERIES
• Open battery compartments on the back.
• Take out old batteries.
• Put new batteries in with +/- terminals in the direction as marked on your scale
• When LC turns on, check that all segments in display are working.
• When the display changes to “0.0”, press the button to select weight units.
• Close battery compartments and wait for LC to turn off.
BUTTON AND BATTERY COMPARTMENTS
MEASURING YOUR WEIGHT
FEATURES & SPECIFICATION
•Auto ON and auto OFF
•Weight Units: kg, lb, st:lb
•Capacity: 180 kg, 397 lb, 28 st: 51 lb
•Graduation: 0.1kg, 0.2 lb
•Measurement range: 5 kg ~ 180 kg
•Overload indication: “- - - -”
•Low battery indication “Lo”
•Power supply: 4 AAA batteries
•imension: 320mm 320mm 22mm
PRECAUTIONS
• Please read this manual before using your scale
• Use your scale on hard and level floors.
• o not use your scale on soft, wet, or slippery surfaces.
• o not step on your scale with wet feet.
• o not step on the display window, the edges or the handle of your scale.
• o not spill water or other fluid onto your scale.
• o not expose your scale to extreme temperature, humidity, or moisture.
ZEROING YOUR SCALE
Zeroing your scale must be performed after moving your scale to a new location, or
after installing or replacing batteries. To zero your scale:
<1> Step on the scale.
<2>
<3>
<1> Step on the scale directly.
<2> The LC turns on and start displaying your weight.
<3>
<4> Step off the scale and wait for it to turn off.
.
k
g
/
l
b
/
s
t
<5> The result will be sent to a previously paired Bluetooth-enabled
host device. The scale will display "good" if data has been sent over
successfully, or "FAIL" if not. The scale does not save any results.
BLUETOOTH SPECIFICATION
• Bluetooth version 2.1 + E R
• Class 2 Bluetooth device
• Support SPP and HI profiles
• Just Works simple pairing mode
• SSP with protection against MITM attack
• Advanced power saving technology extends battery life
x
x
x
When LC turns on, step off the scale.
Wait for the scale to turn off while displaying "0.0" or "- 01 -".
When stablised, the weight display flashes twice.