digital world ARC-SP182 User manual

ARC-SP182 UHD 1x2 HDMI Splitter
User manual
V1.0ep

www.digitalworld.net.nz 1
Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please keep this
manual for future reference.
I. Introduction
This 1 by 2 HDMI UHD Splitter with HDCP 2.2 is an advanced solution for splitting a single
HDMI input to two HDMI outputs. It provides high performance audio and video output through
HDMI c a b le s up to 4K2K@60Hz (YUV444) resolution and is capable of receiving and transmitting
up to 18Gbps of bandwidth with no data loss. Supporting the latest features you can be assured of
reliable and high quality HDMI distribution.
II. Features
1. Compliant with HDMI2.0, HDCP2.2 and DVI 1.0;
2. Support video format up to 4k2k@30Hz with 24bit RGB/YcbCR 4:4:4/YCBCR 4:2:2,and up
to 4k2k@60Hz with 12bit YCBCR 4:4:4;

www.digitalworld.net.nz 2
3. Support 3D frame sequential video format up to 1080p@60;
4. Support high resolution VESA mode video format up to QSXGA@60Hz;
5. Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio;
6. Supports smart EDID control;
III. Package
1. UHD 1x2 HDMI Splitter ------------------------------------------------------------------ 1PC
2. 5V1A DC Power adapter ----------------------------------------------------------------- 1PC
3. Operation Manual ------------------------------------------------------------------------- 1PC
IV. Specifications
1. Video Bandwidth 600MHz/18Gbps
2. I n p u t P o r ts 1 × HDMI (Female type)
3. Output Ports 2 × HDMI (Female type),
4. Output Resolution 480i ~1080p50/60, 4Kx2K@24/30, 4k2k@60Hz

www.digitalworld.net.nz 3
5. ESD Protection Human Body model: ±8 kV (air-gap discharge)
±4 kV (contact discharge)
8. Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL certified)
9. Dimensions 56 mm (W) × 100 mm (D) × 16 mm (H)
10. Weight 165 g
11. Chassis Material Metal
12. Operating Temperature 0 °C~40 °C/ 32 °F~104 °F
13. Storage Temperature −20 °C ~ 60 °C/−4 °F ~140 °F
14. Relative Humidity 20~90 % RH (non-condensing)
15. Power Consumption (Max) 5W

www.digitalworld.net.nz 4
V. Operation controls and Functions
Front Panel & Rear Panel
1. POWER LED: This blue LED illuminate when the device is connected with power supply.
2. OUT LED: These blue LEDs will light up to indicate which HDMI outputs are connected to

www.digitalworld.net.nz 5
an active TV/display/monitor.
3. IN LED: This blue LED illuminate when the Source connected to the device.
4. EDID STD: When in 'STD' mode, the unit will use its own built-in EDID settings. In this
mode, the video output will be set to 1080p@60Hz and the audio output at LPCM 2CH
Stereo. Use this mode if there are display problems in TV Mode.
5. EDID TV: When in 'TV' mode, the unit will read the EDID settings of the display device
connected to HDMI OUT 1. If it detects a 4K2K capable EDID setting it will transmit the
signal in that format to all outputs. If no 4K2K capable EDID is detected then the unit will
output the best resolution that all displays can support.
6. HDMI OUT 1~2: Connect each of the HDMI outputs to an HDMI display for simultaneous
HDMI distribution, or cascade the output to another transmitter to extend the operating
distance.
7. HDMI IN: Connect the input port to the HDMI or DVI output of your source device such as a

www.digitalworld.net.nz 6
DVD player or set-top box with an HDMI cable.
8. DC 5V: Plug the 5V DC power supply into the unit and connected the adaptor to an AC
outlet.
VI. Applicat io n E x a mp le