Digitus DS-45331 User manual

4in1 AV Adapter/Switch
Quick Installation Guide
DS-45331

2
1. Introduction
The DIGITUS® 4in1 AV Adapter/Switch offers the option of
connecting any device. It features four video inputs (HDMI,
DP, Mini DP, and USB-C™) for connection to a TV, monitor or
projector (HDMI). The changeover switch on the device can
be used to switch conveniently between input devices.
Power supply is provided via the Micro USB connection (min.
10W/5V/2A required). The adapter also supports UHD
resolutions (4K/60Hz).
2. Features
1. 4x Video inputs: HDMI, DP, Mini DP, USB-C™
2. DP 1.2 / HDMI 2.0
3. 1x Video output: HDMI
4. Supports: UHD 4K2K/60 Hz
5. Cable length: Input 30 cm / Output 100 cm
6. Switch conveniently between the signal sources using the
changeover switch on the adapter
7. Power supply via Micro USB connection (min. 10W,
5V/2A required)
8. Aluminum housing
9. Perfect for stationary and mobile use
10. HDCP 2.2 / 1.4

3
3. Package Contents:
1x Adapter
1x Micro USB cable (0.5 m)
1x QIG
4. Product Specification
Product Size
85.5 x 60 x 14 mm ( L x W x H)
Cable Length
1m
Shell
Aluminum + ABS
Weight
200g
Operating
temperatures
0°C -40°C
Operating Humidity
10%-80%
Karting
DC 5V 350mA
Input
DP / Mini DP / HDMI / TYPE C
Output
HDMI

4
5. Product Overview
1
Mini DisplayPort
6
Micro USB
2
DisplayPort™
7
HDMI(output)
3
HDMI(input)
8
Power Switch
4
USB Type-C™
9
Interface Switch
5
LED indicator
6. User Operation
1. Plug the USB A of the included USB power cable into the
power adapter and insert the Micro USB end connector
into the product’s Micro USB female socket
2. Connect the HDMI OUT to the display device (TV,
monitor, projector, etc.) and set the signal source to
HDMI input.

5
3. Plug the MINI DP, DP, HDMI, TYPE C connector of the
product into the signal source to be connected, and the
display device will show the display screen of the signal
source
4. Press the interface switch on the product to switch the
input signal, the corresponding LED indicator after the
switch, representing the switched device as the signal
input source. The power button can be used to turn on
and off the working power of the product.
Hereby Assmann Electronic GmbH declares that the
Declaration of Conformity is part of the shipping content. If
the Declaration of Conformity is missing, you can request it
by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany