Digitus DA-70617 User manual

UNIVERSAL SOCKET
CHARGING ADAPTER
(2x USB-A)
Manual
DA-70617

1
Description
Power supply: 16A, 250V, 50Hz
Protection class: IP 20
USB: 2x Type A
Output: 5V 2.1A total
Specification
Mains/power socket/plug:
Max. Input current:16A
Rated voltage: 250V 50Hz
Rated power max: 3680W
Input voltage: 100-250v
Environment:
Working temp: 0 °C - 35 °C

2
USB Charger
2x USB connector (A&A);
Charger for mobile devices (e.g. smartphone,
tablet, etc.)
How to link power
1. Install the USB plug adapter by connecting it
to a grounded power outlet,
2. The indicator or the charge control light will
now turn red. The device is ready for
operation.
3. Up to 2 suitable USB devices can now be
connected via the USB ports by using USB
connection cable.
4. At the same time suitable household
appliances can be connected and put into
operation via the socket outlet.

3
Safety precautions
•Please read this manual thoroughly before
first use and keep it in a safe place for future
reference.
•The safety precautions enclosed herein
reduce the risk of fire, electric shock and
injury when correctly adhered to. The power
plug is designed for private use. It is not
suitable for commercial use. The device is not
designed for outdoor usage.
•The units can only be operated individually.
Do not plug the charging adapter one behind
the other.
•Any other use is considered improper.
•Children do not recognize the danger of
improper use of electrical equipment.
•Let them never use electrical appliances
unattended.

4
•Danger of suffocation! Do not leave packaging
material lying carelessly. Children can swallow
small parts and suffocate
•The power plug can only be used in
conventional earthed sockets with an
alternating voltage of 90 ~ 240V and 50Hz
•Use of the power plug only in permanently
installed wall sockets
•Do not plug the switch sockets into an
extension cable
•Make sure that the plug of a device is
completely plugged into the power plug
•The outlet must be located close to the device
and easily accessible
•Do not connect loads whose unattended
switching on could cause a fire (e.g. an iron)
or other hazards
•Heaters and similar devices should never be
unattended during use

5
•Do not connect loads that require a motor
capacitor (e.g. a refrigerator)
•Only use the charging adapter within the
specified temperature range between 0 ~ 40°C
•When not in use, store the product in a clean
and dry place in temperatures between 0°C
and 40°C
•Do not exceed the maximum power rating
3680 W
•Do not cover the power plug. Heat is
accumulating under the cover. There is a fire
hazard
•Do not let the devices come into contact
with liquids
•Do not touch the power plug with wet hands
•Ensure that the devices are only used inside.
These devices are not intended for outdoor
use and can be damaged.
•Install the power plug in close proximity to an
easily accessible wall outlet.

6
•Never try to repair the power plug by yourself.
Repair and maintenance work must be carried
out by specialists. Check the units regularly for
damage. Do not use the power plugs if there is
obvious damage to the housing
•In case of problems contact our customer
service
•To disconnect the power plug, disconnect
from the mains
•If the power plug needs cleaning, disconnect
it from the main power and wipe the outlet
with a dry cloth
Hereby Assmann Electronic GmbH declares that the Declaration of
Conformity is part of the shipping content. If the Declaration of
Conformity is missing, you can request it by post under the below
mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany