Digitus DS-53440 User manual

VGA UTP EXTENDER
4-PORT WITH AUDIO
Quick Installation Guide
DS-53440

INTRODUCTION
This VGA UTP Extender 1X4 Splitter with Audio is an ideal device for local
displaying and remote viewing. It combines split function and extension
function. It distributes the input of the VGA signal and audio signal into four
identical outputs simultaneously. Each receiver by Cat5 x1 works with the
Sender as a full functional module by receiving the distributed signal from the
sender and transmitting to displays individually. Only by the most inexpensive
UTP cable with cross stand inside, the full functional module extend the VGA
display max up to 300 meters. It offers solutions for VGA retail and show site
and Projector factory, noise space and security concerns, data center control,
information distribution, conference room presentation, school and corporate
training environments.
FEATURES
This device has many features that enable it to perform in a superior manner.
Among those features you will find:
●Extend VGA video and stereo audio signal up to 300m over one UTP cable
●Adjusting GAIN and PEAK to adapt for the different length of UTP cable.
GAIN: Brightness adjustment.
PEAK: Skew adjustment.
●Supports resolution of up to 1920x1200.
●Dual output at local unit:
1 x VGA output for local site, 4 x UTP output for remote site.
●Work with monitors, projectors, HDTV, and flat panels.
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure
the following items are contained in the shipping carton:
1) 1 x VGA UTP Extender 1X4 Splitter
2) 1 x User’s Manual
3) 1 x VGA UTP Extender Receiver Unit
4) 2 x 5V / 2A DC Power Supply

CONNECTION AND OPERATION:
1) Connect the VGA source to the main VGA input using a VGA cable.
2) Connect VGA output of the Sender to a local display
3) Connect Sender and Receiver using a CAT-5e/6 cable
4) Connect VGA output of Receiver to remote display
5) Plug the 5V@2A power supply into the Sender and the other 5V@2A power
supply into the Receiver
6) Optional connect Audio to Sender and Receiver side
Attention: Insert / Extract cable gently.
CONNECTION DIAGRAM:

SPECIFICATIONS
Input /Output Connector
Input connector VGA(Female 15pin), Stereo Audio
Output connector VGA(Female 15pin),
Stereo Audio,4xRJ45
Operating Frequency
Vertical Frequency Range 60/75/85Hz
Resolutions(PC)
640X480
800X600
1024X768
1280X720
1280X768
1280X960
1280X1024
1600X900
1600X1200
1920X1080
1920X1200
Mechanical
Size of VGA UTP Extender 1X2
Splitter
154×69×23mm
Size of Receiver (L-W-H) 110×75×25mm
Environmental
Operating Temperature 0℃to +70℃
Operating Humidity 10% to 85 % RH (no condensation)
Storage Temperature -10℃to +80℃
Storage Humidity 5% to 90 % RH (no condensation)
Power Requirement
Power Supply for VGA UTP
Extender 1X2 Splitter
5V@2A
Power Supply for Receiver 5V@1A
Note: Specifications are subject to change without notice.