Digitus DN-651143 User manual

INDUSTRIAL 5-PORT
GIGABIT PoE EXTENDER
Quick Installation Guide
DN-651143

2
1Product Introduction
This PoE extender is equipped with 1 PD input to power up 4
Giga PSE output. It can be used as a standalone PD/PSE PoE
injector or to extend PoE distance. It can be cascaded up to 4
units or 500 meters to deliver high power for your end device.
2Features
•5-Port 10/100/1000BASE-T Gigabit RJ45 Interface
•Thunder, Lightning resistant
•Built-in hardened PoE and PD controller
•Can be cascaded up to 4 units or 500 meters
•Works in extreme environment -40°C to +75°C
•Data Processing: Store and Forward
•Flow Control: IEEE 802.3x Flow Control and Back Pressure
•Jumbo Frame: 9KB
•Auto MDI/MDI-X function, Full/Half duplex
3Package Contents
•1x PoE Extender
•1x Mounting Material
•1x Manual

3
4Hardware Specifications
IEEE Standard
IEEE 802.3 10Base-T Ethernet,
IEEE 802.3u 100Base-TX Fast
Ethernet, IEEE 802.3ab
1000Base-T Gigabit Ethernet,
IEEE 802.3x Flow Control and
Back Pressure, IEEE 802.3af PoE,
IEEE 802.3at PoE+, IEEE 802.3bt
PoE++
Switch Architecture
Back-plane (Switching Fabric):
10Gbps
Data Processing
Store and Forward
Flow Control
IEEE 802.3x Flow Control and
Back Pressure
Jumbo Frame
9KB
MAC address Table
Size
2K
Packet Buffer Size
1Mbits
Network Connector
5x RJ-45 10/100/1000M auto
negotiation, 1x RJ-45
10/100/1000M with IEEE802.3bt
In, 4x RJ-45 10/100/1000M with
IEEE802.3at Out
Network Cable
UTP/STP Cat.5e or above Cable,
EIA/TIA-568 (100m)
Protocol
CSMA/CD
Reserve polarity
protection
Present

4
Overload current
protection
Present
Power Consumption
3.9W without PoE load
PD power input
30W/60W/90W
PoE Power
Maximum total PSE power output
60W
Operating
Temperature
-40°C to 75°C
Operating Humidity
5% to 95% (non-condensing)
Storage Temperature
-40°C to 85°C
Housing
Rugged Metal, IP30
Case Dimension
(L x W x D)
103.5 x 32 x 81.5 mm
Installation mounting
DIN Rail Mount or Wall Mount
5Operating instruction:
•Connect PoE cable into port 5 (Power input
30W/60W/90W)
•Can connect to max. 4 PoE powered devices (PD) from
port 1 to port 4
•Can cascade another DN-651143 up to 4 units or 500m

5
6LED indicator
1
bt (Green)
ON–PoE IEEE 802.3bt is detected.
OFF–PoE IEEE 802.3bt is not detected.
2
LNK/ACT (Green)
ON–TX port is detected.
Flashing–TX data is transmitting/receiving.
PWR (Amber)
ON–Power is detected.
OFF–Power is not detected.
3
LNK/ACT (Green)
ON–TX port is detected.
Flashing–TX data is transmitting/receiving.
PoE (Amber)
ON–PSE is activated, and PD is detected

6
7Connecting the PoE Extender
1
Network Switch
2
48 VDC
3
PoE Injector
4
PoE IP Camera
This is a Class A product. In home environment, this product
may cause radio interference. In this case, the user may be
required to take appropriate measures.
Hereby Assmann Electronic GmbH, declares that the
Declaration of Conformity is part of the shipping content. If
the Declaration of Conformity is missing, you can request it
by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany