Dimenco Displays SR Pro Display User manual
Quick Start Guide
Minimum PC requirements
SR Pro Display hardware specifications
DisplayOptics Dimenco clear view lenticular lens ™
Size 31.5 inch diagonal
Resolution 8K UHD (7680 x 4320)
Aspect ratio 16:9
Refresh rate 60 Hz
Brightness 400 cd/m2
Crosstalk < 2%
Optimal viewing distance 60 ± 20 cm
Optimal viewing angle ± 30° (-30° to +30°)
Color 100 % Adobe RGB, 100 % sRGB, 100 %
Rec709, 98 % DCI-P3
Contrast 1300:1
Sensors
Eye-tracking Intel RealSense D455
Hand tracking Leap Motion Controller
Connectivity
Video input 2x DisplayPort 1.4
Data interfacing 1x USB-B 3.0
(hand-tracking and eye-tracking)
Power
1x male IEC connector 100-230V 50/60Hz AC
Max power consumption 100W
Mains on-off power switch
Dimensions ~ 730 x 620 x 300 mm (WxHxD)
Weight ~ 18 kg - 40 lbs (including stand)
For any questions please see our FAQ at www.dimenco.eu
CPU Intel i7, 10th gen
GPU Nvidia GeForce RTX 2080 Ti or GeForce RTX 30xx
(but mainly determined by the end-user application(s)
I/O 2x DisplayPort 1.4, 1x USB 3.0
21-12-21-v1b
DP1 DP2
REMOVE
DP1 DP2
REMOVE
DP1 DP2
REMOVE
Unpacking & Setup
Unpacking the SR Pro Display Installing the SR platform
Connecting the PC and power supply Included cables
1
When unpacking the SR Pro display, make sure to fi rst take off the
top and mid section of the packaking by taking out the 6 clips at the
bottom. Never lift the monitor out of the box by holding the screen.
To install the SR platform do the following steps:
• Go to https://www.srappstore.com/download-platform
• Click on the button ‘Install SR Platform’.
• Log in or create an account to download the software.
• Once the installer is downloaded, double click to install the SR platform.
• Follow the instructions of the installer and install all the components.
• Restart the PC
And additionally, to enjoy content.
• Go to www.srappstore.com
• Click on the button ‘Install Desktop app’
• Once the installer is downloaded, double click to install the SR App Store.
• Log in into their account
• Explore the software available in the SR App Store
Connecting
In order to connect the power supply and
the dedicated pc, lift and remove the back
hatch panel on the rear side of the display.
EU and US Power supply
2x display port cable
1x USB 3.0 Cable A to B
Power connector
2x Display ports
1x USB 3.0 Cable
On/Off
Please use
power button on
the side of the monitor
No tools required.
To protect the SR Pro display during moving, please keep the packaging stored for future use.
DP1 DP2
REMOVE
EUUS
Leap Motion
Other Dimenco Displays Monitor manuals
