Directed Electronics 700 ESP User manual

Model 700 ESP
Owner's Guide

1
©2000 Directed Electronics, Inc.
Table of Contents
Standard Transmitter Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
What Is Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
System Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FCC/ID Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Transmitter Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Standard Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Using Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Arming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Multi-Level Security Arming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Disarming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
High Security Disarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
High Security Rearm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Disarming Without a Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Silent Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Panic Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Valet®Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Remote Valet®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Nuisance Prevention Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Arming Diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Disarming Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Table of Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Code-Hopping™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
High Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Owner Recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Rapid Resume Logic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Power Saver Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Programming Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Installation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Security & Convenience Expansions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Glossary Of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Quick Reference Guide (Removable) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

2©2000 Directed Electronics, Inc.
Standard Transmitter
Configuration
controls the Arm function.
controls the Disarm function.
controls Silent Mode™and an Auxiliary Output.
controls the Panic function.
and pressed simultaneously control another
Auxiliary Output.
and pressed simultaneously control another
Auxiliary Output.

3
©2000 Directed Electronics, Inc.
What is Included
■A control module
■A pair of four-button transmitters
■A Stinger®shock sensor (on-board the control module)
■A Revenger®siren with rechargeable back-up battery
■The red status LED indicator light
■A push-button Valet®switch
■A pair of siren keys
Important Information
Congratulations on the purchase of your state-of-the-art vehicle
security system. It has been designed to provide years of trouble-
free operation. The owner’s guide should help you to get the most
out of your security system. Please take the time to read it prior
to using the system. Due to its complexity, the system must only
be installed by an authorized dealer.
The system requires no specific maintenance. Your remote is pow-
ered by a small, lightweight 3-volt lithium battery that will last
approximately one year under normal use. When the battery weakens,
operating range will be reduced and the LED on the remote will dim.
System Maintenance

4©2000 Directed Electronics, Inc.
This device complies with Part 15 of FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interfer-
ence received, including interference that may cause undesired
operation.
Caution: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate this device.
Transmitter Functions
This security system’s control module uses a computer-based
learn routine to learn the remote transmitter buttons. This makes
it possible to assign any remote transmitter button, or combina-
tion of buttons, to any control module function. The remote
transmitter initially comes programmed with Standard
Configuration, but may also be customized by an authorized
dealer. The remote transmitter buttons used in all of the instruc-
tions in this owner’s guide correspond to a Standard
Configuration transmitter.
FCC/ID Notice

5
©2000 Directed Electronics, Inc.
Button
The arming function is controlled by pressing .
Button
The disarming function is controlled by pressing .
Button
Silent Mode™and an optional auxiliary function are controlled by
. (Silent Mode works by pressing for less than one
second before arming or disarming. An optional auxiliary function,
such as trunk release, can be controlled by pressing and holding
for 1.5 seconds.)
This auxiliary output controls _____________________________.
Button
The panic feature is controlled by pressing for 1 second.
and Buttons
An optional auxiliary convenience or expansion function that you
have added to your system can be activated by pressing and
simultaneously.
This auxiliary output controls_____________________________.
and Buttons
Another optional auxiliary convenience or expansion function that
you have added to your system can be activated by pressing
and simultaneously.
This auxiliary output controls_____________________________.
Standard Configuration

6©2000 Directed Electronics, Inc.
Using Your System
The transmitter buttons used in the instructions in this manual
correspond to the Standard Configuration. Remember, this is not
the only way your transmitter may be set up. It can be custom
configured to meet your needs.
You can activate, or arm, the system by pressing on your trans-
mitter for one second. When the system arms, you will hear a short
siren sound, or chirp, and the parking lights will flash once. If the
vehicle’s power door locks have been connected to the system, the
doors will lock.
While the system is armed, the status LED will flash approximately
once per second, indicating that the system is actively protecting
your vehicle. If you hear a second chirp after arming, and see the
status LED flashing in groups, refer to the Diagnostics section of
this guide. This extra chirp is called Bypass Notification.
The system also can be programmed to arm itself automatically
(called passive arming). If the system is programmed for passive
arming, it will automatically arm 30 seconds after the ignition is
turned off and the system "sees" you leave the vehicle by opening
and closing a door. Whenever the system is in its 30-second
passive-arming countdown, the status LED will flash twice as fast
as it does when the system is armed. The siren will chirp one time
Arming

7
©2000 Directed Electronics, Inc.
20 seconds after the last door has been closed. The system is not
actually armed at that point. The system arms and the doors lock
(if connected and programmed for passive locking) at the 30
second point, but the siren will not chirp. The early chirp provides
you with a 10-second warning prior to arming.
NOTE: If any protected entry point, such as a door or a switch-protected
trunk or hood, is open, the system will not passively arm unless forced
passive arming is programmed on. See Programming Options section of
this guide. Additionally, each time a sensor is triggered during the arming
countdown, the 30-second countdown starts over.
When armed, your vehicle is protected as follows:
■Light impacts will trigger the Warn Away®signal. The siren will
chirp and the parking lights will flash for a few seconds.
■Heavy impacts will trigger the system. The triggered sequence
is 25 seconds (default) of constant siren and flashing parking
lights; however, the triggered sequence can be programmed
for any duration from 1-180 seconds by an authorized dealer.
■If a door is opened, the system will immediately start chirp-
ing the siren and flashing the parking lights. Three seconds
later, the siren output changes to a continuous blast. This
progressive response allows you time to disarm the system
with your transmitter if you inadvertently open the door while
the system is armed, while still providing an instant response
(even if the door is immediately closed).
■Turning on the ignition key will trip the same two-stage
response as opening a door.
■The fuel interrupt, ignition interrupt and starter kill work
together to provide Security Interrupt, a feature that prevents
the vehicle’s engine from starting.

8©2000 Directed Electronics, Inc.
Multi-Level Security Arming allows you to select which of the
security system's inputs or sensors will be active and which will be
bypassed at the time that the system is armed. (See the Table of
Zones section.) Pressing again within five seconds of arming
the security system will activate the Multi-Level Security
Arming feature. Each time is pressed again, a different secu-
rity level is selected. The different security levels can be selected
as follows:
■Pressing one time: The siren chirps once. The system is
armed.
■Pressing a second time within five seconds: The siren
chirps twice followed by a long chirp. Zone Two is now
bypassed.
■Pressing a third time within five seconds: The siren chirps
three times followed by a long chirp. Zone Four is now
bypassed.
■Pressing a fourth time within five seconds: The siren
chirps four times followed by a long chirp. Zones Two and
Four are now bypassed.
■Pressing a fifth time within five seconds: The siren chirps
five times followed by a long chirp. All input zones, except
the ignition, are now bypassed.
NOTE: Multi-Level Security Arming only applies to a single arming cycle.
Once the system is disarmed and then rearmed, all the zones will be
active again.
Multi-Level Security Arming

9
©2000 Directed Electronics, Inc.
To disarm the system, press . You will hear two chirps, and the
parking lights will flash twice. If the power locks are connected to
the system, the doors will unlock. If the siren chirps either four or
five times when disarming, refer to the Diagnostics section of this
guide. This is called Tamper Alert.
This security system proudly offers High Security Disarm. High
Security Disarm is a feature that makes it possible to silence and
reset the system while it is triggering, without disarming the
system. If the system is triggered, and the siren has been sound-
ing for longer than six seconds, pressing on the remote
transmitter will stop the trigger and return the unit to the armed
state. The system will not disarm, but rather reset. Pressing a
second time after resetting the system will disarm the system.
Pressing during the first six seconds of the triggered sequence
will disarm the security system immediately. The six second timer
is provided for your convenience, in case that the system is acci-
dentally triggered.
High Security Rearm is a feature that protects your vehicle in the
event that the security system is inadvertently disarmed. Two
minutes after disarming the security system with the remote
transmitter, the system will automatically rearm and lock the doors
High Security Rearm
High Security Disarm
Disarming