DiscreteHeat TherMiser TME 3E User manual

Programmable Touch Screen Thermostat
The world’s smartest heating system

PERIOD SYMBOL DEFAULT PERIOD TIME DEFAULT PERIOD TEMPERATURE
Working/week days
Mon - Fri
1,2,3,4,5
1st 06:30
Good morning 22°C
2nd 09:00
Leave for school/work 15°C
3rd 12:00
Return for lunch 15°C
4th 14:00
Go back out 15°C
5th 17:00
Welcome home 22°C
6th 23:00
Good night 15°C
Weekend
Sat - Sun
6,7
1st 06.30 22°C
2nd 23:00 15°C
02 03
Using the TherMiser TME 3E
Instructions on how to set and use your newly purchased TherMiser TME 3E unit.
The following pages will help guide you through the process.
Note: to add additional time/temperature periods to days 6 & 7 please see 1.2 b&c to create a 6 or 7 day “working week”,
each day having 6 time/temp settings.
Basic functions and display
Factory default settings
Visit www.discreteheat.com/thermiser for more information
Manual/temporary override (flash)
Power on/off
Mode key
Time set
Increase
Decrease
Target temp
1st-6th time period
Forst protection
Screen lock
Current room temp
Sensor mode
7 day view
Time display
Heating on

TherMiser TME operation
To ensure you follow the instructions correctly, please refer to the diagram below to familiarise yourself
with the layout and meaning of each of the on-screen icons.
1. Time and time interval setting 2. Advanced settings
Press the time key to scroll between hour/minute/day
of the week.
In each mode press the or to adjust the time
(24hr) & day (1-7). Note: Mon = 1, Sun = 7.
The time and day will now be set.
Press so that the screen is off
Then press and hold + together. The unit enters the
menu at Status 1: “SEN” and in Function 00 (flashing).
To adjust the settings press or
To move through menu Items 1-7 press the button.
See the menu below
To prevent tampering and adjustment of the TherMiser unit, unit, press for 5
seconds appears. To unlock, press for 5 seconds flashes then disappears.
Manual Override . Press or to override current target temp. appears
and if heat required. Automatically resets to program mode at next time interval.
Press and hold for 5 seconds; screen displays ‘loop’
(programming mode) then:
A. press screen displays “12345”
B. (up) Once Screen displays “123456”
C. (up) twice Screen displays “1234567”
NOTE: In any of the above modes press to select the time
interval setting and target temperature; see 1.3.
Press again to enter the 1st time period/temperature setting
(Good morning) factory default is (06:30 and 22°C).
Press again and the ON time hour starts flashing
(default: 06:30), press or to adjust the hour.
Press again and the ON time minute starts flashing
(default: 06:30), press or to adjust the min.
Press again and the target temp starts flashing
(default: 22°C), press or to set target temp.
Press again to enter into the 2nd time period/temperature
setting (leave for school/work) repeat the steps above
to set, or
Press again to enter into 3rd time period/temperature
setting and repeat as above.
Repeat through all of the remaining periods.
1.1 SETTING THE TIME (FACTORY DEFAULT (00:00)
1.2 TIME INTERVAL AND TEMERATURE AUTO CONTROL SETTINGS
1.3 SETTING THE ON/OFF TIME AND TEMPERATURE
Menu
no Icon FuncTIon oPTIonS FAcToRY SeTTInG
1 SEN Controls sensor inputs
00: Built-in temp sensor only
01: External temp sensor only
02: Built in temp and External
Skirting Temp Sensor
Note: If no external sensor fitted,
“ERR” message displays, unit will
not function
00
2 OSV
Upper limit
of external/
ThermaSkirt sensing
temp,
5~99°C 42°C
3 DIF
Differential
hysteresis between
off and on again of
external temp.
1~9°C 2°C
4 SFH Room temperature
upper limit 5~99°C 35°C
5 SVL Room temperature
lower limit 5~99°C 5°C
6 ADJ
Calibrates tem of unit to
the room, compensating
for external factors.
-5~+5° 0°C
7 FRE Frost protection 00: Frost protection OFF
01: Frost protection ON. 5°C 00
8 PON Power on memory 00: Auto memory, no power
01: NO power = no memory 00
9FAC Factory reset
Adjust using until“00”
then press to restore
factory settings
00
2.1 ENTERING INTO ADVANCED SETTINGS MENU*
2.2 LOCK SCREEN/MENU
2.3 LOCK SCREEN/MENU
* These are advanced settings and should be adjusted with caution.

DiscreteHeat Company Limited
1 Victoria Works Industrial Estate,
Atherton, Manchester, M46 0FY.
www.discreteheat.com
0845 123 8367
TherMiser TME 3E installation
Installation
Mounting the TherMiser
Wiring the TherMiser
Recomended
fixing height
n1.2-1.6m
Avoid draughts Avoid direct sunlight
and heat
Avoid wet and
shower areas
35mm
60mm ‘Click’
59
1 2 3 4
AC100-230V
max 16A N L
Load
P20
UP
NTC
6
5
86
50
86 50
N
L
230V
16-32A
TYPE B
RCBO
NL
Load
Surface temp probe
VAL
O12
Switched fuse spur
TSE
100
or