Danfoss TP5001 series User manual

User Guide
TP5001
Programmable Room Thermostat
www.heating.danfoss.com

User Guide TP5001 Programmable Room Thermostats
2Danfoss Heating VUSUF102 09/2020
1 LCD Overview
Symbols Function description Symbols Function description
Mon – Sun Current set day Heating active
1 2 3 4 Current on/o period Frost protect active
AM
PM
Current set time / parameter
number in setup Schedule mode
Room temperature Away mode
Temperature indication
RF Status
(TP5001RF only)
SET
Set temperature Battery low indicator
(TP5001B & TP5001RF only)
2 Buttons
Symbols Function description
Power on/o
Timer and program
operation
MMode change / option
setting
< > Temperature / option
setting selectors
3 Power ON/OFF
Turn the thermostat ON or OFF (standby) by pressing .
4 Setting the Temperature
• Press <or >at any time to change the desired temperature value. SET is shown in the display.
• When releasing <or >, the display returns to showing the actual temperature.
• The adjustment step is 0.5 °C.
5 Select Away Mode
• Press Mto enter Away mode and will be displayed.
• Away mode temperature can be set in parameter settings, P07.
• Press Magain to exit Away mode.
6 Set Date & Time
• Press ; Year digit Flashes. Press < or > buttons to adjust year.
• Press again; Month digit ashes. Press < or > buttons to adjust month.
• Press again; Day digit ashes. Press < or > buttons to adjust day of the month.
• Press again; Hour digit ashes. Press < or > buttons to adjust hour.
• Press again; Minute digit ashes. Press < or > buttons to adjust minute.
• Press to exit, automatic exit after 20 seconds, any changes are retained.

User Guide TP5001 Programmable Room Thermostats
09/2020 VUSUF102 Danfoss Heating 3
7 Frost Protection Temperature
• You can switch the thermostat OFF (Standby) by alternately pressing . In OFF (Standby) mode, thethermo-
stat is set to a Frost Protection temperature setting and will switch On only if the measured temperature falls
below this temperature (5 °C by default).
• The frost protect icon and current temperature will be displayed.
8 Advanced Programmable Timer
The Advanced Programmable Timer mode enables the setting of a timer-controlled program for automatic
comfort temperature, and an energy-saving lower setback temperature if standard room comfort temperature is
not required.
Example below for 5/2 day setup, 4 Temperature settings.
The function consists of 2 programs:
P1 with 4 events in 5 days (Mon. Tue. Wed. Thu. Fri.) P2 with 4 events in 2 days (Sat. Sun.).
P1: Press for 3 secs to display Mo. Tu. We. Th. Fr.
P1, Event 1:
1. Use <or >to select the start hour.
2. Press to accept the setting.
3. Use <or >to set the minute.
4. Press to accept the setting.
5. Use <or >to select the temperature.
6. Press to accept the setting.
P1, Event 2-4:
Repeat the Event 1 procedure for programming
Event 2-4.
P2: Sa. Su. are now shown in the display.
P2, Event 1:
1. Use <or >to select the start hour.
2. Press to accept the setting.
3. Use <or >to set the minute.
4. Press to accept the setting.
5. Use <or >to select the temperature.
6. Press to accept the setting.
P2, Event 2-4:
Repeat the Event 1 procedure for programming
Event 2-4.
If schedule working mode is set to 24hr, only P1 program will be available, see parameter P01. Mo. to Su. will be
set together with the same times and temperatures.
The thermostat will continue the 4-event program based on the present time and day.
To set and change the room temperature temporarily:
1. Press <or >at any time to change the desired temperature value. SET is shown in the display.
2. When releasing the <or >, the display returns to showing the actual temperature. This temperature change is
only temporary and will be maintained only until the next programmed setting!
A default program provides timer control if the customer does not create own programs:
Days Event 1 Event 2 Event 3 Event 4
Start time Temp. Start time Temp. Start time Temp. Start time Temp.
Mo. - Fr. 6:30 20° C 8:30 15° C 16:30 20° C 22:30 15° C
Sa. - Su. 7:30 20° C 9:30 15° C 16:30 20° C 22:30 15° C
* 24hr mode default program same as Mo. - Fr. above.

User Guide TP5001 Programmable Room Thermostats
Danfoss Heating VUSUF102 | BC306936081288EN-000102 09/2020
9 Set Control Parameters
• Press M button for 6 seconds to enter the parameter setting mode. Press M for parameter selection and set
the parameter range via < or >. Complete all adjustments.
• To exit press , which is available for this purpose (automatic exit after 20 seconds with no operation).
The digits indicate the set value as follows:
No. Parameter settings Settings range Default
P01 Working mode
01: Manual
02: Schedule timer 5/2 day
03: Schedule timer 24hr
02
P02 Heat control mode 01: On/o load compensation
02: On/o standard 01
P03 Heat control start-up mode
01: Normal start control
02: Delayed start control
03: Optimised start control
01
P04 Temperature limit high Between low (P05) and 35° C 35° C
P05 Temperature limit low Between 5° C and high (P04) 5° C
P06 Frost protect temperature Between 5° C and 15° C 5° C
P07 Away mode temperature Between low (P05) and high (P04) 18° C
P08 Timer display 01: 24hr
02: 12hr 24hr
P09 Service due setup Installer setting only
P10 RF Pairing (TP5001RF only) 00: RF pairing mode o
01: RF pairing mode on 00
P11 Auto daylight saving 01: On
02: O 01
10 Error Messages
E1 Sensor failure
EE EEPROM failure
Lo Measured temperature below 0 °C
Hi Measured temperature above 50 °C
E3 RF Pairing failed
E4 RF Signal lost