DiscreteHeat ThermaSkirt TherMiser TME 3E Guide

The world’s smartest heating system
Programmable Touch Screen Thermostat
All manuals and user guides at all-guides.com
all-guides.com

PERIOD SYMBOL DEFAULT PERIOD TIME DEFAULT PERIOD TEMPERATURE
Working/week days
Mon - Fri
1,2,3,4,5
1st 06:30
Good morning 22°C
2nd 09:00
Leave for school/work 15°C
3rd 12:00
Return for lunch 15°C
4th 14:00
Go back out 15°C
5th 17:00
Welcome home 22°C
6th 23:00
Good night 15°C
Weekend
Sat - Sun
6,7
1st 06.30 22°C
2nd 23:00 15°C
Using the TherMiser TME 3E
Instructions on how to set and use your newly purchased TherMiser TME 3E unit.
The following pages will help guide you through the process.
Note: to add additional time/temperature periods to days 6 & 7 please see 1.2 b&c to create a 6 or 7 day “working week”,
each day having 6 time/temp settings.
Basic functions and display
Factory default settings
Visit www.discreteheat.com/thermiser for more information
Manual/temporary override (flash)
Power on/off
Mode key
Time set
Increase
Decrease
Target temp
1st-6th time period
Forst protection
Screen lock
Current room temp
Sensor mode
7 day view
Time display
Heating on
All manuals and user guides at all-guides.com

TherMiser TME operation
1. Time and time interval setting
In each mode press the or to adjust the time
(24hr) & day (1-7). Note: Mon = 1, Sun = 7.
The time and day will now be set.
A. press screen displays “12345” B. (up) Once Screen displays “123456”
Press the time key to scroll between hour/minute/day
of the week.
Press and hold for 5 seconds; screen displays ‘loop’
(programming mode) then:
C. (up) twice Screen displays “1234567”
1.1 SETTING THE TIME (FACTORY DEFAULT (00:00)
1.2 TIME INTERVAL AND TEMERATURE AUTO CONTROL SETTINGS
NOTE: In any of the above modes
press to select the time interval
setting and target temperature; see 1.3.
Visit www.discreteheat.com/thermiser for more information
All manuals and user guides at all-guides.com

Press again to enter into the 2nd time period/
temperature setting (leave for school/work) repeat
the steps above to set.
Press again and the target temp starts flashing
(default: 22°C), press or to set target temp.
TherMiser TME operation
Press again and the ON time hour starts flashing
(default: 06:30), press or to adjust the hour.
Press again and the ON time minute starts flashing
(default: 06:30), press or to adjust the min.
Press again to enter into 3rd time period/
temperature setting and repeat as above.
Press again to enter the 1st time period/temperature
setting (Good morning) factory default is
(06:30 and 22°C).
1.3 SETTING THE ON/OFF TIME AND TEMPERATURE
1. Time and time interval setting
Visit www.discreteheat.com/thermiser for more information
All manuals and user guides at all-guides.com

2. Advanced settings
To adjust the settings press orPress so that the screen is off.
Then press and hold + together. The unit enters
the menu at Status 1: “SEN” and in Function 00 (flashing).
* These are advanced settings and should be adjusted with caution.
To move through menu Items 1-7 press the button.
See the menu below
2.1 ENTERING INTO ADVANCED SETTINGS MENU*
TherMiser TME operation
To prevent tampering and adjustment of the TherMiser unit, unit, press for 5
seconds appears. To unlock, press for 5 seconds flashes then disappears.
Manual Override . Press or to override current target temp. appears
and if heat required. Automatically resets to program mode at next time interval.
MENU NO. ICON FUNCTION OPTIONS FACTORY SETTING
1 SEN Controls sensor inputs
00: Built-in temp sensor only
01: External temp sensor only
02: Built in temp and External Skirting Temp Sensor
Note: If no external sensor fitted,“ERR” message
displays, unit will not function
00
2 OSV Upper limit of external/ThermaSkirt sensing temp, 5~99°C 42°C
3 DIF Differential hysteresis between off and on again
of external temp. 1~9°C 2°C
4 SFH Room temperature upper limit 5~99°C 35°C
5 SVL Room temperature lower limit 5~99°C 5°C
6 ADJ Calibrates tem of unit to the room, compensating
for external factors. -5~+5° 0°C
7 FRE Frost protection 00: Frost protection OFF
01: Frost protection ON. 5°C 00
8 PON Power on memory 00: Auto memory, no power
01: NO power = no memory 00
9FAC Factory reset
Adjust using until“00”
then press to restore
factory settings
00
2.2 LOCK SCREEN/MENU 2.3 LOCK SCREEN/MENU
Visit www.discreteheat.com/thermiser for more information
All manuals and user guides at all-guides.com

TherMiser TME installation
Visit www.discreteheat.com/thermiser for more information
Installation
Mounting the TherMiser
Wiring the TherMiser
Recomended
fixing height
n1.2-1.6m
Avoid draughts Avoid direct sunlight
and heat
Avoid wet and
shower areas
35mm
60mm ‘Click’
59
1 2 3 4
AC100-230V
max 16A N L
Load
P20
UP
NTC
6
5
86
50
86 50
N
L
230V
16-32A
TYPE B
RCBO
NL
Load
Surface temp probe
VAL
O12
Switched fuse spur
TSE
100
or
All manuals and user guides at all-guides.com
all-guides.com

DiscreteHeat Company Limited
1 Victoria Works Industrial Estate,
Atherton, Manchester, M46 0FY.
www.discreteheat.com
0845 123 8367
All manuals and user guides at all-guides.com