disguise 2x2plus Installation instructions
Index
• Welcome
• What’s in the box?
• Front panel 22plus
• Back panel 22plus
• Card configuration
• Quick start
• Maintainance
• Accessories
• General information
• Support
2
3
4
5
6 - 8
9
10
11 - 12
13
14
1
2
Welcome
Thank you for your purchase with disguise.
Your new 22plus is just minutes away from being show ready. Please read the instructions in this Hardware guide carefully
in order to understand how to work with your 22plus. Please also refer to our online guide at help.disguise.one.
Great for smaller shows and fixed installations, the 22plus is a machine with two stage outputs and one control interface (GUI)
output. It comes with optional factory fitted DVI or SDI capture and optional Pro Audio cards. Please ensure your machine has
been delivered to you in the configuration you have ordered, by comparing your machine to the specifications in the card
configuration chapter in this booklet.
We put great care and effort into the development and manufacturing of our products. Please contact your sales manager or our
support team if you experience any issues with this product. Contact details can be found on the back page of this booklet.
We hope you enjoy your 22plus, and if you have any questions or feedback for us, we’d be happy to hear from you.
Kind regards,
The disguise Team.
What’s in the box?
ACCESSORIES BOX:
1) IEC Power cable EU / UK / US
2) 2 Single Link DPDVI adapter
3) Hardware Guide
4) Pro Audio break out cables*
*only if Pro Audio was purchased as an optional extra to the base unit
Please see the accessories chapter in this booklet for further information.
MAIN BOX:
5) 22plus unit
Optional factory fitted extras include:
- DVI capture card
- 3GSDI capture card
- Pro Audio
Please check if everything in the box is delivered as expected and contact your sales manager immediately in the event that
something is missing.
3
Front panel 22plus
The front panel of the 2x2plus has the following functions and controls:
1 2 3 4 5
1. Air intake
2. USB 2.0 ports
3. Reset button
4. LED power indicator
5. Power on/off button
4
5
Back panel 22plus
BASE UNIT: no capture, on-board audio
CONFIGURATION A: 1x DVI capture, shown with Pro Audio (on-board audio also available)
CONFIGURATION B: 2x 3G-SDI capture, shown with Pro Audio (on-board audio also available)
USB 2.0
USB 3.0
1 GBit/s
Ethernet A & B
On-board Audio
DualLink
DVI-D Output
Display Port 1.2
Output 1
Display Port 1.2
Output 2
IEC Power
Output line+mic level
Input mic+line level
USB 2.0
USB 3.0
1 GBit/s
Ethernet A & B
DVI Capture
DualLink
DVI-D Output
Analogue
Audio Out
Digital
Audio Out
Display Port 1.2
Output 1
Display Port 1.2
Output 2
ADAT OUT & IN
IEC Power
USB 2.0
USB 3.0
1 GBit/s
Ethernet A & B
2 x 3G-SDI
DualLink
DVI-D Output
Analogue
Audio Out
Digital
Audio Out
Display Port 1.2
Output 1
Display Port 1.2
Output 2
ADAT OUT & IN
IEC Power
SLOT A: Video output
Slot A is non-configurable. The 22plus has 1 control / GUI output and 2 dedicated DisplayPort stage outputs.
Video output card:
SLOT A
SLOT B
SLOT C
Rear view card configuration
1 2
1. DVI
2. DisplayPorts
The control / GUI output is situated on the DVI connector ONLY, enabling you to configure the system, operate Windows and
program the disguise environment. This output CANNOT be used for output to the stage.
Supported resolutions on the DisplayPort outputs and DVI output are up to 25601600 @ 60hz. (When using the correct DisplayPort
to DVI adapter).
For more information on video outputs and adapters please see help.disguise.one
Card configuration
The 2x2plus comes in a variety of optional factory tted congurations. You cannot change your machine conguration once your order
has been shipped. The following congurations are available:
• No capture, a choice of on-board audio or Pro Audio
• 1x DVI capture, a choice of on-board audio or Pro Audio
• 2x 3G-SDI capture, a choice of on-board or Pro Audio
6
7
Card configuration
Pro Audio card:
SLOT B: Audio
Slot B is by default on-board audio but can be configured to be Pro Audio I/O when the order is placed.
On-board audio card:
12345
1. NOT IN USE
2. Output line level
3. Output mic level
4. Input mic level
5. Input line level
1 2 34
For information on supported formats please see help.disguise.one
1. Analog audio
2. ADAT Out
3. ADAT In
4. Digital audio
1. NOT IN USE
2. 3GSDI
SLOT C: Video capture
Slot C has three options: no capture, DVI capture, or 3GSDI capture. Capture options are factory fitted.
DVI capture card: Max resolution 19201200 @ 60hz
1 2
1
1. DVI
For information on supported formats please see help.disguise.one
3GSDI capture card: Max resolution 19201080 @ 60hz
Card configuration
8
9
1. Make sure you have connected a keyboard, mouse, monitor and speakers as shown below.
Quick start
2. Connect the power cable from the accessories box as shown below to a power point.
3. Press the power button on the front of the unit and wait for the system to load into Windows.
4. Run Manager from the start menu in windows to start a project (see help.disguise.one for how-to info).
Unit connected to peripherals
IEC power on rear of unit
Power on/off button on front of unit
To reveal and inspect the air filter remove the six screws on the front facia of the unit as shown
Remove the air filter material by sliding it out in the direction shown
After cleaning replace the filter in the metal housing and then replace the front facia
Maintenance
Please check the fan filter regularly. Dirty or obstructed fan filters can degrade system performance.
10
Accessories
DisplayPort adapters
Each 22plus system ships with two DisplayPort to DVI adapters to allow connectivity to devices that support the DVI interface.
These are Single-Link adapters, see image below:
11
Single-Link adapter
These DisplayPort adapters will allow you to output resolutions up to 1920 1200 pixels per DP output.
Digital audio breakout
The Pro Audio option comes with an analog breakout cable which lets you choose which input/ output to use.
1. Balanced line in (XLR)
2. Balanced line out (XLR)
3. RCA phono (white is S/PDIF input)
4. RCA phono (red is S/PDIF output)
Digital breakout cable
1
3
2
4
1
2
3
4
Balanced analogue breakout cable
1. Stereo headphone
2. 2 x balanced line out (XLR)
3. 2 x balanced line in (XLR)
4. Midi in & out (5 pin DIN)
For recommended accessories please see help.disguise.one
Accessories
Analog audio breakout
1
2
3
4
Un-balanced analogue Breakout cable
1. Stereo headphone
2. Line in (Right and Left)
3. Line out (Right and Left)
4. Midi in & out (5 pin DIN)
12
Should you have questions or experience issues with this product, contact disguise Technologies Support department for
assistance.
Only certified technicians should attempt to repair or configure components, please contact your sales manager to arrange this
or contact one of our support team through the contact page in this booklet.
Ultimate disposal of this product should be handled according to all regional and national laws and regulations.
Power consumption
ACINPUT 100240V
50/60Hz, 7A
Assembled in the UK with partial foreign content
Technical details and specifications can be found at: disguise.one/en/products/plus
This product contains componenets compliant with various International standards of manufacture, for full information please
see help.disguise.one
13
General information
14
Helpful contacts
Helpful links
User Guide help.disguise.one
Trial disguise.one/en/get-disguise/get-trial/
Software Updates disguise.one/download
Additional Designer licenses store.disguise.one
Support
Table of contents
Other disguise Server manuals
