Disney baby NEMO Palma Change Centre 057630-259 User manual

NEMO
Palma Change Centre
Introduce your little character to ours
Model #057630-259

2
Before assembling this change centre, read and understand the
instructions. Incorrect assembly may make the change centre unsafe.
Do not use this change centre if any part is broken, torn or missing.
Keep instructions in a safe place for future reference.
Safety Precautions
This product has been manufactured for a child with a maximum age of 12 months or a
maximum weight of 11kgs.
Do not place more than 1kgs of goods in the nappy bag.
Be aware of the risk of open res and other sources of heat, such as electric bar res, gas
res, etc. in the near vicinity of the changing unit.
Use original accessories and manufacturer approved parts only.
Always ensure that the change pad locking tabs are locked in place when the change pad is
raised and not in use.
Do not use this change pad if any part is torn, broken or missing.
Ensure that the change centre is completely assembled and check that all parts are securely
tightened before use.
Regularly check all parts for tightness - tighten or replace if required.
Promptly replace worn or broken parts.
WARNING :
DO NOT LEAVE YOUR CHILD UNATTENDED.
ALL BRAKES ON CASTORS / WHEELS MUST BE APPLIED
BEFORE PLACING YOUR CHILD ON THE CHANGE PAD OR
IN THE BATH.
DO NOT ALLOW OLDER CHIDREN TO CLIMB OR PLAY ON
THE CHANGE CENTRE.
WARNING
Children have DROWNED while using bath aids.
This is NOT a safety device.
ALWAYS keep baby within arm’s reach.
NEVER leave baby in care of children. !!

3
Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and
design may vary from images shown. CNP Brands reserves the right to alter product
specications without notice as a result of our ongoing policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Change Centre
Congratulations on your purchase of the
Nemo Palma Change Centre.
This product has been designed and developed with
safety, comfort and functionality in mind. Please take
the time to read this manual carefully before using
this product and keep it in a safe place for future
reference.

4
Supplied loose in box:
Assembly Contents
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below.
If anything is missing, please contact Customer Service. In Australia, contact CNP
Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on
0800 567 5000.
x2
x2
x1
x1
x1
x3
x1
x1
x1
x1
x4
x12
x1
x1
End panel
Side frame
Change Pad
Bottom shelf
Bathtub
Storage
containers
Side tray with
towel rail
(L+R)
Nappy bag
Top frame
Drainage
hose
Castors
Bolts
Bath plug
Plastic
assembly
tool

5
Attaching side frames
1. Insert side frame into one side of
one end panel.
2. Insert two bolts and secure using
plastic assembly tool. Do not
tighten completely.
3. Insert second side frame into end
panel and secure with bolts, using
plastic assembly tool. Do not
tighten bolts completely.
4. Repeat to attach second end
panel.
Attaching castors
Slide castors onto end panels with castors pointing down.
Assembling top frame
1. Place top frame into position, and attach to one end panel
with two bolts using plastic assembly tool. Do not tighten bolts
completely.
1. 2.
3. 4.
Assembly / Operating Instructions

6
Assembly / Operating Instructions
Assembling top frame
1. Place bolt through one loop of
nappy bag and attach to one
side of end panel using plastic
assembly tool.
2. Place remaining bolt through other
loop of nappy bag and attach to
remaining hole in end panel.
3. Tighten all twelve bolts.
To attach bottom shelf
1. Place bottom shelf in position as
shown.
2. Fold up sides and attach end aps
around vertical bars of side panels,
using press studs to secure as
shown.
3. Attach aps underneath around
bottom rail of side bar using velcro
as shown.
To attach change pad
Place change pad into position, and attach to thin rail of top frame
using clips underneath change pad.
2.
1.
3.
3.
2.

7
Assembly / Operating Instructions
Assembling plastic components
1. Place the three storage containers into
position on the upper rails of the side
frames, creating a shelf in the centre
of the unit.
2. Place the left component of the side
tray into position, then place the right
component ensuring it clips into the
left component as shown. Ensure the
side tray rests against the bar on the
top frame.
3. Place bathtub into position as shown
Change pad operation
1. To lower change pad, lift using
handle tab on the front, and push
backwards behind change centre.
2. To raise change pad, lift using
handle tab on the front, and pull
upwards into position.
3. Always ensure, that when using change pad the two safety
straps are secured to the press studs on each end panel.
1.
1.
2.
2.
3.
3.

Distributed in Australia by CNP Brands
20 Calarco Drive,
Derrimut, VIC, 3030
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: [email protected]
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by
Wainhouse Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes, Auckland, New Zealand
Customer Service: 0800 567 5000
E: [email protected]
Care Instructions
Cleaning
To ensure the long-lasting use of your change centre, wipe down with a damp cloth and use a
mild soap solution if necessary. Do not use abrasive cleaners. Always store product in a clean
dry place.
Maintenance
Always check parts regularly for tightness of bolts, nuts and other fasteners – tighten or
replace if required. To maintain the safety of your change centre, seek prompt repairs for bent,
torn, worn or broken parts. Use only those parts and accessories approved by CNP Brands.
If you have any difculties in assembling the change centre, please contact our Service
Department. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact
Wainhouse Distribution on 0800 567 5000.