Inside Weather JORN SIDE TABLE User manual

JORN SIDE TABLE

Gather Your Eggs...
Left Leg
Back
Lower Shelf
Table Top
Right Leg
Note: Please retain all boxes until you are certain that your product isn’t damaged and that you
do not wish to return it. Disposal of boxes may prevent/delay our ability to resolve your request.
Ratchet Long Hex Bit

Step 1: Attach Bottom Shelf to Back Panel
Next, take the bottom shelf with the
connectors facing out and align the rear
mounting holes with the corresponding
holes on the back panel.
Fasten to the back using the provided
ratchet and long hex bit. The plastic
connectors have covers which can be
placed on after all bolts are in place.
Start by placing the back panel with the
pocket side up on a soft surface so that
you don’t damage your peice.
Note: When fitting the peices together, make sure the connecting
screws are retracted inside their housing. Having the screw out could
damage your surfaces.

Step 2: Attach First Leg
Lay out the first leg with the
mounting holes facing up.
Align the connectors on the bottom
shelf with the corresponding holes
on the leg.
Fasten the shelf and back panel to
the leg.
Rotate the table around and fasten
the connector in the upper portion of
the back panel.

Step 3: Attach Second Leg
Step 4: Place Top
Repeat the previous directions
to attach the second leg.
Flip side table base on
feet, and place on the
removable table top.
DONE!
Use plastic covers to
cover bolt openings
after all are tightened.