Divus CIRCLE User manual

DIVUS CIRCLE user manual . 1
DIVUS CIRCLE
DIVUS CIRCLE small
DIVUS CIRCLE small+
DIVUS CIRCLE small C*
DIVUS SQUARE small C*
User manual
Version 2.8.0
REV02-2023-04-13

DIVUS CIRCLE user manual . 2
GENERAL INFORMATION
DIVUS GmbH
Pillhof 51
I-39057 Eppan (BZ) - Italy
Operating instructions, manuals and software are protected by copyright. All rights are reserved. Copying,
multiplication, translation and conversion, either partially or as a whole, is not permitted. You are allowed to make
a single copy for backup purposes.
We reserve the right to make changes to the manual without prior notification.
We assume no responsibility for any errors or omissions that may appear in this document.
We do not assume liability for the flawlessness and correctness of the programs and data contained on the
delivered discs.
You are always welcome to inform us of errors or make suggestions for improving the program.
The present agreement also applies to special appendices to the manual.
This manual can contain terms and descriptions, which improper use by third can harm the copyrights of the
author.
Please read the manual before beginning and keep the manual for later use.
The manual has been conceived and written for users who are experienced in the use of PCs and automation
technology.
CONVENTIONS
[KEYS]
Keys that are to be pressed by the user are given in square brackets, e.g. [CTRL] or [DEL]
COURIER
On-screen messages are given in the Courier font, e.g. C:\>
COURIER BOLD
Keyboard input to be made by the user are given in Courier bold, e.g. C:\>DIR).
„…“
Names of buttons to be pressed, menus or other onscreen elements and product names are
given within double quotes. (e.g. “Configuration”).
PICTOGRAMS
In this manual, the following symbols are used to indicate particular text blocks.
Caution!
A dangerous situation may arise that may cause damage to material.
Hint
Hints and additional notes
New
New features

DIVUS CIRCLE user manual . 3
SAFETY INSTRUCTIONS
The present operating instructions contain those safety instructions that are required to safely operate the ma-
chine.
All persons working with the machine must heed the present operating instructions, especially the safety in-
structions.
In addition, all local stipulations governing the prevention of accidents must be heeded.
Only trained and authorized personnel may INSTALL AND OPERATE the machine.
PROPER APPLICATION: The machine has been designed for application inside the building automation and
must not be used to control security functions.
The machine has been built using state-of-the-art technology and all applicable safety regulations. However,
damage or negative effects to the machine or other material cannot be excluded if the machine is operated.
The machine meets the requirements of the EMC guidelines and of the harmonized European standards. Modifi-
cations to the machine hardware may affect the system’s EMC compatibility.
Without special protection measures, the machine must not be used in EX areas and in plants that require spe-
cial monitoring.
Danger of explosion. Do not expose the buffer batteries to heat. Serious injury may be the result.
The operating voltage of the machine must be within the specified range! The product label provides the re-
quired information.
The device is designed to be mounted at most 2m above the ground.

DIVUS CIRCLE user manual . 4
STANDARDS
The DIVUS TOUCHZONE meets the following guidelines and standards:
Low Voltage Directive 2014/35/EU (ex 73/23/CEE –93/68/CEE –06/95/CE)
Standard to which conformity is declared:
EN 62368-1:2014/A11:2017 Safety
EMC Directive 2014/30/EU (ex 89/336/CEE –92/31/CEE –93/68/CEE –04/108/CE)
Standard(s) to which conformity is declared: Conducted & Radiated Emissions
EN 61000-6-1:2007
EN 61000-6-3:2007/A1:2011
Draft ETSI EN 301 489-1 V2.2.0
Draft ETSI EN 301 489-3 V2.1.1
EN 62311 (24GHz)
EN 300 330 V2.1.1
RoHS2 Directive 2011/65/EU (ex 02/95/EC)
Standard(s) to which conformity is declared:
EN 50581:2012 Restriction of hazardous substances
The installation and wiring instructions contained in this documentation must be heeded. Conformity is indicated
by the attached CE label.
The EC conformity statements can be obtained from:
DIVUS GmbH
Pillhof 51
I-39057 Eppan (BZ)
Regarding Directive 2012/19/EU (ex 2002/96/EC) waste electrical and electronic equipment
has to be collected separately and is not allowed to dispose as unsorted municipal waste.

DIVUS CIRCLE user manual . 5
INDEX
GENERAL INFORMATION __________________________________________________________________________ 2
CONVENTIONS ___________________________________________________________________________________ 2
SAFETY INSTRUCTIONS ___________________________________________________________________________ 3
STANDARDS _____________________________________________________________________________________ 4
INDEX ___________________________________________________________________________________________ 5
1INTRODUCTION________________________________________________________________________________ 9
1.1 GENERAL INFORMATION_____________________________________________________________________ 9
1.2 VERSIONS AND MODELS ____________________________________________________________________ 9
2WIZARD _____________________________________________________________________________________ 11
2.1 FIRST ACCESS_____________________________________________________________________________ 11
2.2 STEP 1 –START ___________________________________________________________________________ 13
2.3 STEP 2 –LICENSE AGREEMENT _____________________________________________________________ 14
2.4 STEP 3 –SYSTEM INTEGRATOR DETAILS _____________________________________________________ 15
2.5 STEP 4 –CUSTOMER DETAILS_______________________________________________________________ 16
2.6 STEP 5 –DATE/TIME _______________________________________________________________________ 17
2.7 STEP 6 –SIP LOCAL SETTINGS ______________________________________________________________ 19
2.7.1 STANDALONE MODE __________________________________________________________________ 19
2.7.2 EXTERNAL MODE _____________________________________________________________________ 21
2.8 STEP 7 –SIP CLOUD SETTINGS______________________________________________________________ 21
2.9 STEP 8 –NETWORK SETUP _________________________________________________________________ 22
2.10 STEP 9 –SUMMARY / LAST STEP_________________________________________________________ 23
3WEB INTERFACE______________________________________________________________________________ 24
3.1 ACCESSING THE WEB INTERFACE ___________________________________________________________ 24
3.2 SYSTEM SETTINGS SECTION ________________________________________________________________ 24
3.2.1 SYSTEM STATUS PAGE ________________________________________________________________ 24
3.2.2 SYSTEM –UPGRADE __________________________________________________________________ 25
3.2.2.1 UPGRADE PROCEDURE ___________________________________________________________ 25

DIVUS CIRCLE user manual . 6
3.2.3 SYSTEM –BACKUP & RESTORE ________________________________________________________ 27
3.2.3.1 BACKUP PROCEDURE_____________________________________________________________ 27
3.2.3.2 RESTORE PROCEDURE ____________________________________________________________ 28
3.2.3.3 FACTORY RESET _________________________________________________________________ 29
3.2.4 SYSTEM –REBOOT____________________________________________________________________ 31
3.2.5 SUPPORT ____________________________________________________________________________ 31
3.2.6 SETTINGS –SYSTEM INTEGRATOR______________________________________________________ 32
3.2.7 SETTINGS –CUSTOMER _______________________________________________________________ 32
3.2.8 SETTINGS - DATE/TIME________________________________________________________________ 32
3.2.9 SETTINGS –SIP LOCAL ________________________________________________________________ 32
3.2.10 SETTINGS –SIP CLOUD________________________________________________________________ 32
3.2.11 SETTINGS –I/O MODULES _____________________________________________________________ 32
3.2.12 SETTINGS –NETWORK ________________________________________________________________ 32
3.2.13 SETTINGS –DISPLAY (DIVUS CIRCLE ONLY) _____________________________________________ 33
3.2.14 SETTINGS –LANGUAGE _______________________________________________________________ 33
3.2.15 SETTINGS –VOLUME__________________________________________________________________ 33
3.2.16 SETTINGS –DOOR LOCK RELAY (DIVUS CIRCLE V.2 ONLY) _______________________________ 34
3.2.17 SETTINGS –PHOTO EVENTS ___________________________________________________________ 35
3.2.18 APPEARANCE (PREVIOUSLY CIRCLE SETTINGS)__________________________________________ 35
3.2.19 LOGOUT _____________________________________________________________________________ 35
3.3 CIRCLE APPEARANCE SECTION (PREVIOUSLY CIRCLE SETTINGS)_______________________________ 35
3.3.2 ADDRESS & NAMES ___________________________________________________________________ 36
3.3.3 PROFILES (DIVUS CIRCLE ONLY) _______________________________________________________ 38
3.3.3.1 AVATAR CONFIGURATION ________________________________________________________ 39
3.3.3.2 DASHBOARD CONFIGURATION ____________________________________________________ 40
3.3.4 DAY & NIGHT _________________________________________________________________________ 41
3.3.5 ILLUMINATION (DIVUS CIRCLE /CIRCLE SMALL/CIRCLE SMALL +) _________________________ 41
3.3.6 HOLIDAY (DIVUS CIRCLE)______________________________________________________________ 42
3.3.7 ACCESS CONTROL____________________________________________________________________ 43

DIVUS CIRCLE user manual . 7
3.3.7.1 ADDING AND EDITING USERS______________________________________________________ 43
3.3.7.2 DELETING USERS_________________________________________________________________ 45
3.3.7.3 ENABLING / DISABLING USERS ____________________________________________________ 45
3.3.7.4 DEFINING A USER’S SCHEDULE____________________________________________________ 45
3.3.7.5 IMPORTING AND EXPORTING USERS _______________________________________________ 46
3.3.7.6 IMPORTING AND EXPORTING SCHEDULES __________________________________________ 47
3.3.7.7 ACCESS LOG ____________________________________________________________________ 48
3.3.8 SYSTEM SETTINGS ____________________________________________________________________ 48
3.3.9 LOGOUT _____________________________________________________________________________ 48
4USER INTERACTION___________________________________________________________________________ 49
4.1 STARTING A CALL _________________________________________________________________________ 49
4.1.1 USING THE BELL ICON ________________________________________________________________ 49
4.1.2 USING THE SCREEN (DIVUS CIRCLE ONLY) ______________________________________________ 50
4.1.3 USING THE SCREEN (DIVUS CIRCLE SMALL+ ONLY)______________________________________ 50
4.2 OPENING THE DOOR _______________________________________________________________________ 50
4.2.1 MANUALLY __________________________________________________________________________ 50
4.2.2 FROM INSIDE _________________________________________________________________________ 50
4.2.3 ON THE MOVE________________________________________________________________________ 50
4.2.4 USING AN ACCESS CODE ON THE KEYPAD (ON DIVUS CIRCLE) ___________________________ 51
4.2.5 USING AN ACCESS CODE ON THE KEYPAD (ON DIVUS CIRCLE SMALL +)___________________ 51
4.2.6 USING AN NFC TAG (REQUIRES THE OPTIONAL NFC MODULE –SEE CHAPTER 5.1) _________ 52
4.3 CLEANING (DIVUS CIRCLE ONLY)____________________________________________________________ 52
4.4 PROGRAMMING A NEW NFC TAG ___________________________________________________________ 52
4.5 VISUAL FEEDBACK_________________________________________________________________________ 53
4.5.1 CIRCLE SMALL AND CIRCLE SMALL +, CIRCLE / SQUARE SMALL C*_______________________ 53
4.5.2 CIRCLE ______________________________________________________________________________ 54
5OPTIONAL MODULES__________________________________________________________________________ 57
5.1 NFC MODULE _____________________________________________________________________________ 57
5.2 TOWER MODULE (CIRCLE ONLY) ____________________________________________________________ 57

DIVUS CIRCLE user manual . 8
6I/O MODULES ________________________________________________________________________________ 59
6.1 I/O MODULE CONFIGURATION ______________________________________________________________ 59
6.2 I/O MODULE OUTPUT FUNCTION CONFIGURATION____________________________________________ 61
6.2.1 TIMER DESCRIPTIONS _________________________________________________________________ 62
7COMMANDING RELAYS________________________________________________________________________ 64
7.1 INTRODUCTION____________________________________________________________________________ 64
7.2 BUILT-IN RELAY ___________________________________________________________________________ 64
7.3 I/O MODULE OPTION _______________________________________________________________________ 64
7.4 ACCESS 1 AND ACCESS 2 –EXPLANATION___________________________________________________ 64
8TECHNICAL DATA ____________________________________________________________________________ 66
8.1 DIVUS CIRCLE - QUICK START GUIDE ________________________________________________________ 66
8.2 DIVUS CIRCLE SMALL / SMALL + - QUICK START GUIDE_______________________________________ 78
8.3 DIVUS CIRCLE –MOUNTING INSTRUCTIONS (MOUNTING BOX) _________________________________ 90
8.4 DIVUS CIRCLE SMALL / SMALL + - MOUNTING INSTRUCTIONS (MOUNTING BOX) ________________ 91
8.5 DIVUS CIRCLE - DATA SHEET _______________________________________________________________ 92
8.6 DIVUS CIRCLE SMALL / SMALL + - DATA SHEET______________________________________________ 99
NOTES ________________________________________________________________________________________ 105

DIVUS CIRCLE user manual . 9
1Introduction
1.1 GENERAL INFORMATION
Thank you for having bought a DIVUS CIRCLE! This manual will help you to set up your smart intercom device in
the optimal way.
The main features of your new DIVUS CIRCLE are:
•SIP outdoor station for intercom systems
•Wide angle camera
•Access by code or by NFC card (using MIFARE 13.56MHz standard)
•Command any other system through the DIVUS I/O module
•Access control
•Answer from DIVUS wall mounted panels and mobile devices
This manual will guide you through the setup and show you how to configure and manage all the functions of
your new DIVUS CIRCLE.
1.2 VERSIONS AND MODELS
There are different hardware versions of DIVUS CIRCLE.
All models of version 2 have a third green interface on the back for the internal relay. Moreover, they also work
with 24V power adapters. Version 1 devices have no internal relay and need a 48V power source.
Wherever in this manual the versions differ in functionality, the referred version is indicated explicitly.
The classic DIVUS CIRCLE and DIVUS CIRCLE small are now joined by the C* models:
•DIVUS CIRCLE small C*
•DIVUS SQUARE small C*
These have the same external dimensions as the DIVUS CIRCLE small, but their surface is characterised by the
CORIAN® material in various colours.
For a more detailed overview of the functionalities that all models have in common or are only available on some,
we offer the following overview table:

DIVUS CIRCLE user manual . 10
FUNCTIONALITY
CIRCLE
CIRCLE small +
CIRCLE small
CIRCLE/SQUARE
small C+
CAPACITIVE
RING BUTTON
󲊣
󲊣
󲊣
󲊣
ENTRY PER
KEY CODE
󲊣
󲊣
󲊥
󲊥
ENTY PER NFC
(OPTIONAL)
󲊣
󲊣
󲊣
󲊣
INTEGRATED
RELAY
󲊣
󲊣
󲊣
󲊣
DASHBOARD WITH
DESIGN OPTIONS
󲊣
󲊥
󲊥
󲊥
LED-RING FOR
WALL ILLUMINATION
󲊣
󲊣
󲊥
󲊥
FISHEYE-
HD-CAMERA
󲊣
󲊣
󲊣
󲊣
APPROACH SENSORS
󲊣
󲊣
󲊥
󲊥
POE+
󲊥
󲊣
󲊣
󲊣
ACCESS CONTROL
󲊣
󲊣
󲊣
󲊣
I/O-MODUL SUPPORT
󲊣
󲊣
󲊣
󲊣
INTEGRATABLE UNITS
1000
(MIT TOWERMODUL)
4
1
1
MATERIAL /
COLOURS
GLASS / BLACK
GLASS / BLACK
GLASS / BLACK
CORIAN®/
DEEP NOCTURNE
DESIGNER WHITE
SILVER GRAY

DIVUS CIRCLE user manual . 11
2Wizard
2.1 FOREWORD
This chapter describes the wizard that is displayed when you connect to your new DIVUS CIRCLE for the first
time.
The prerequisite is, of course, that the DIVUS CIRCLE is already supplied with power and has completed the boot
process. On the PC from which the configuration is to be carried out, you must ensure that it is set to DHCP. To
do this, go to the adapter settings of the network interface used, then to the item "Internet protocol version 4
(TCP/IPv4)" (double-click):

DIVUS CIRCLE user manual . 12
Make sure that the settings here look like in the following screenshot:
At the end of the wizard, you can return to the usual settings. If these look like above anyway (i.e. you are already
using DHCP by default), you do not need to make any changes to your PC to carry out the WIZARD.
2.2 FIRST ACCESS
Now you can connect to the DIVUS CIRCLE by entering the network name of the unit in the URL bar of your web
browser. This consists of the abbreviation "sn" followed by the serial number of the unit, which can be found on
the label on the back of the unit or on the box, e.g.:
•Serial number: 23002
•Network name: sn23002
•To be entered in the web browser: https://sn23002
or alternatively: sn23002.local
To restart the wizard after the first completion - if necessary, add "/wizard" to the IP address, e.g. use (in the
example above) https://sn23002/wizard

DIVUS CIRCLE user manual . 13
If the unit is not accessible, this command from MS PowerShell can be helpful:
Resolve-DnsName -name sn23002
As first step select the desired language:
Then it starts in the selected language (click Save).
2.3 STEP 1 –START
If you have a previous backup which you want to restore, you can click the link Restore from backup. This will
interrupt the wizard and you will be able to login to the CIRCLE with the restored configuration. Otherwise, read
on.

DIVUS CIRCLE user manual . 14
2.4 STEP 2 –LICENSE AGREEMENT
Read and accept the license terms checking the checkbox in step 2:

DIVUS CIRCLE user manual . 15
2.5 STEP 3 –SYSTEM INTEGRATOR DETAILS
Fill in at least the fields with a * about the system integrator, but we recommend taking the time to fill out all the
fields to have complete and clear reports thereafter.

DIVUS CIRCLE user manual . 16
2.6 STEP 4 –CUSTOMER DETAILS
Again, fill in at least the fields with a * about the customer (again we recommend to fill out all the fields)

DIVUS CIRCLE user manual . 17
2.7 STEP 5 –DATE/TIME
If your device will have internet access, you can choose the time zone, enable the synching and choose two NTP
servers:

DIVUS CIRCLE user manual . 18
If the device will have no internet access, disable the NTP synching and enter date and time manually:

DIVUS CIRCLE user manual . 19
2.8 STEP 6 –SIP LOCAL SETTINGS
Choose the installation type and whether you are going to use the DIVUS CIRCLE as VoIP server (choose
STANDALONE) or it will be a VoIP client on an external VoIP server (choose EXTERNAL).
* DIVUS CIRCLE and DIVUS CIRCLE small + only
** DIVUS CIRCLE with TOWER module only.
2.8.1 STANDALONE MODE
In Standalone mode, the Circle (any model) will be automatically assigned the VoIP ID 901 (used as client ID on
its own VOIP server). Moreover, it will have these other IDs available for devices participating to the communication
system:
INSTALLATION TYPE
NUMBER OF APARTMENTS
Villa
1
Compound with 2 apartments
2 *
Compound with 3 apartments
3 *
Compound with 4 apartments
4 *
Tower
>4 **

DIVUS CIRCLE user manual . 20
The user can’t change these! Also note that the password is equal to the id for the above accounts.
The IDs available for internal devices are automatically subdivided depending on the number of units configured
through the “Installation type” setting:
Summarizing, this means:
•in Villa mode there are accounts for up to 4 internal devices. This is the default and only the models
DIVUS CIRCLE and DIVUS CIRCLE small + also support the compound modes.
•In Compound mode for 2 units both will have max. two internal devices. In the other setups for 3 or 4
units, there is one device per unit available, using the IDs defined in the table above.
•If there is one other external device participating, it may be assigned one of the IDs 902, 903 or 1201.
If the device is set to Standalone mode and should be reachable also remotely, please fill in the fields External
IP/DynDNS and External Port.
Please note that the new solution for remote access over the DIVUS Cloud is preferrable for new installations.
See step 7.
The settings for DTMF-Tones are those used by DIVUS VIDEOPHONE (MOBILE) when you push the two door-
opener buttons. So, it is best to leave them at the pre-set values.
IDS FOR ANSWERING DEVICES
IDS FOR ADDITIONAL INTERCOMS
1101, 1102, 1103, 1104
901 (taken by itself), 902, 903, 1201
VILLA
MODE
2 UNITS COMPOUND
MODE
3 UNITS COMPOUND
MODE
4 UNITS COMPOUND
MODE
IDS APT.1
4: 1101
1102
1103
1104
2: 1101
1102
1: 1101
1: 1101
IDS APT.2
x
2: 1103
1104
1: 1102
1: 1102
IDS APT.3
x
x
1: 1103
1: 1103
IDS APT.4
x
x
x
1: 1104