IPLoC - Quick Start Guide 2017-03-02. Ver. 1_Rev_2 Specications are subject to change without notice. DKT is not responsible for any typographical errors or wrong.
DKTCOMEGA
Fanoevej 6
DK-4060 Kirke Saaby
Tlf +45 4646 2626
Fax +45 4646 2625
Web www.dktcomega.com
IPLoC - Quick Start Guide
The following items should be found in your
package:
Plug in IPLoC to the existing ADSL / Broadband
router with an Ethernet cable in LAN socket.
Install the IPLoC on the existing TV socket.
(if you have a TV cord in the socket, remove it
and put it in the IPLoC instead).
Plug the supplied mains adapter to IPLoC
To connect an additional device, open an second
unit and connect the device to the TV socket in
which you want an Internet connection.
Connect the network cable to the device.
When the second device is connected, it will be
congured automatically. Could take up to 3 min.
For the function of the device, please check the
LED indicator lights on the side of IPLoC
IPLoC push-on module has a Reset/Default func-
tion.
When pressing the reset button,
the device make a new search for
other units.
No function
IPLoC - example
1 pcs
IPLoC
push-on
module
1 pcs
Power supply
with DC-con-
nector
Name: Status: Indication:
Power Green Power on
Off Power off
MoCA Green Link
Off No link
LAN Green Ethernet connected
Blinking Activity
For complete information, see installation manual
Computer TV
Gateway, delivery point Router
if you have a TV cord in the socket, remove it and
put it in the IPLoC instead
Internet
TV-signal
Smart-TV
TV
Internet
MoCA
LAN
It may take up to 3 minutes for devices to nd
each other and establish link after a reset.
