DMI Sports FT500 User manual

DMI Sports For Customer Service Call 1.800.399.4402
1.800.399.4402
FAX: [phone]
Please have your model number when inquiring about parts.
Or write to:
DMI Sports
Customer Service
375 Commerce Drive
Fort Washington PA, 19034
Please visit our web site at:
www.dmisports.com
When contacting DMI Sports, please provide your model number
and item number (if applicable) if requesting a replacement part.
Item numbers can be found inside this owners manual.
Congratulations on the purchase of your new DMI Sports
Soccer table. Our products are designed and
manufactured to give you years of game playing enjoyment.
KEEP BOX AND PACKING MATERIAL UNTIL TABLE
HAS BEEN COMPLETELY ASSEMBLED.
ALL DAMAGE MUST BE REPORTED TO DMI
WITHIN TEN DAYS OF RECEIPT.
If you have any problems with your new product,
PLEASE DO NOT RETURN IT TO THE STORE.
Please contact us:
Your Model Number
_______________________
Your model number is also located on the original carton. These instructions
are also available online at: www.dmisports.com.
FT500
005250
6

DMI Sports For Customer Service Call 1.800.399.4402
Please Keep Your Instructions!
(You will need your Model number should you need to contact us.)
Before attempting assembly, please read through this instruction book to familiarize yourself with all
the parts and assembly steps. We recommend that two adults assemble this table. Please refer to the
Parts Identifi er on the following page and be sure that all parts have been included. Although extreme-
ly rare, occasionally a part may be missing. If you are missing a part, or if you have any questions, please
call our customer service department at 1.800.399.4402 Mon-Fri between the hours of 9:00am and
5:00pm E.S.T; or you can reach us at: www.dmisports.com.
Do not return the game to the store. Please contact us fi rst at: 1.800.399.4402 or on our website at:
www.dmisports.com.
IMPORTANT!
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS SOCCER TABLE
DMI Sports For Customer Service Call 1.800.399.4402-2-DMI Sports For Customer Service Call 1.800.399.4402

DMI Sports For Customer Service Call 1.800.399.4402
PARTS IDENTIFIER
HARDWARE PARTS
A1
A2
Sand Blasted Ball
RPFT-BALL
Qty.
2
Qty.
1
ACCESSORY
PARTS
DMI Sports For Customer Service Call 1.800.399.4402
-3-
DMI Sports For Customer Service Call 1.800.399.4402
H
1
H
2
H
3
H
4
Qty.
4
Qty.
4
Qty.
24
Qty.
16
TOOLS REQUIRED FOR ASSEMBLY:
•
Phillps Head Screw driver
-
Not Included
• Level recommended-
Not Included
•
Allen
Wrench
- Included
H
5
H
6
H
7
H
8
Qty.
6
Qty.
26
Qty.
8
H
9
Qty.
12
Qty.
26
5/16” x 2.5” Bolt
RPFT500-HKIT
5/16”
Washer
RPFT500-HKIT
F4 x 1” Screw
RPFT500-
HKIT
3/8” x 1.5” Bolt
RPFT500-HKIT
Lock Nut
RPFT500-
HKIT
T5 x
15MM Screw
RPFT500-
HKIT
1/2” Screw
RPFT500-
HKIT
P4 x 1.5 Screw
RPFT500-
HKIT
#8 x 1.375 Screw
RPFT500-
HKIT
5mm Allen Wr
emch
RPFT-5MMTOOL
H
10
Qty.
16
3/8” Washer
RPFT500-
HKIT

DMI Sports For Customer Service Call 1.800.399.4402
DMI Sports For Customer Service Call 1.800.399.4402
-4-
DMI Sports For Customer Service Call 1.800.399.4402
P8
Qty.
2
ASSEMBLY
PARTS
P
1
P
2
P
3
P
4
P
5
P
6
P
7
Side
Panel
RPFT500-SPANL
Qty.
2
Qty.
2
Qty.
1
Qty.
2
Qty.
4
Qty.
2
Qty.
2
P
16
Qty.
2
P
9
P
10
P
11
P
12
P
13
P
14
P
15
Qty.
4
Qty.
2
Qty.
16
Qty.
16
Qty.
16
Qty.
8
Qty.
8
P
17
P
1
8
P
1
9
P
20
P
21
Qty.
2
Qty.
4
Qty.
1
2
Qty.
1
2
Qty.
2
End
Panel
RPFT500-E
PANL
Home Player
RPFT500-HOME
Goal
RPFT500-GOAL
Leg
RPFT500-LEG
Play Fi
eld
RPFT500-FIELD
L
eg Levelers
RPFT500-LEV
Ball Entry
RPFT500-ENTRY
Side Ramp
RPFT500-SRAMP
Left End Ramp
RPFT500-LRAMP
5 Player Rod
RPFT500-5ROD
2 Player Rod
RPFT500-2ROD
Right End Ramp
RPFT-RRAMP
Bumper
RPFT-BUMPER
Steel Washer
RPFT500-SWASH
Plastic Washer
RPFT500-PWASH
Wooden Handle
RPFT500-HANDL
Rod End Cap
RPFT500-CAP
Three Player Rod
RPFT500-3ROD
Away Player
RPFT500-
AWAY
PARTS IDENTIFIER
Slide Scorer
RPFT-SCORE
P
2
2
Qty.
2
Cup Holder
RPFT500-CUPHOLD

DMI Sports For Customer Service Call 1.800.399.4402
DMI Sports For Customer Service Call 1.800.399.4402-5-DMI Sports For Customer Service Call 1.800.399.4402
ASSEMBLY
STEP
1
.
Start by assembling the table frame.
Start by assembling the table frame.
Secure the
Side Panels (P2) to one o
f the End
f the End
Panels (P
1
)
using Bolt (H1), Washer (H2) and Screw (H10).
using Bolt (H1), Washer (H2) and Screw (H10).
Once you have secured one of the End panels to
Once you have secured one of the End panels to
the Side panels, place the Playing Field (P3), play-
the Side panels, place the Playing Field (P3), play-
ing surface facing down, between the three panels
ing surface facing down, between the three panels
before securing the fi nal End Panel (P1).
before securing the fi nal End Panel (P1).
STEP
2
.
Once the End and Side
panels are assembled and
the
Playing Field i
s in place, secure th
e playing fi eld
using Screws (H3). B
e sure to in
e sure to in
se
rt screws straight
rt screws straight
down so as not to damage the
down so as not to damage the
Playing fi eld.
P
3
P
1
H
10
H
2
H
1
P
2
H
3
FIG. 1.1
FIG. 1.1
FIG. 2.1
No
te:
Please assemble cabinet on packing material
. Hard fl oors may damage the panels
and carpeting may get
caught between panels while the table is being assembled.

DMI Sports For Customer Service Call 1.800.399.4402
DMI Sports For Customer Service Call 1.800.399.4402
-6-
DMI Sports For Customer Service Call 1.800.399.4402
ASSEMBLY
STEP
3
.
Place the Goal
Place the Goal
s (P4) on the inside of
each
End Panel
(P1) and secure using Screw (H10) as shown in
(P1) and secure using Screw (H10) as shown in
Fig
ure 3.1.
STEP
4
.
With the table rema
With the table rema
in
in
ing
ing
the up-side-down position
the up-side-down position
attach the legs to the frame assembly using Bolts (H4)
attach the legs to the frame assembly using Bolts (H4)
and Washers (H5)
and Washers (H5)
as shown in Fig
ure 4.1. Once all of
the legs are a
the legs are a
ttached and fi rmly secured attach the Leg
levelers (P9).
levelers (P9).
P4
H
10
H4
H5
P5
P
9
H
4
H
5
FIG. 3.1
FIG. 4.1

DMI Sports For Customer Service Call 1.800.399.4402
-7-
DMI Sports For Customer Service Call 1.800.399.4402
-7-
DMI Sports For Customer Service Call 1.800.399.4402
ASSEMBLY
STEP
5
.
With at least two adults, carefully turn the
table over
onto the leg levelers.
Each End Ramp (P6-P8) has an adhe
sive side,
on which you will apply
to the
edges of the
Playing Field (P3). Simply peel
and remove
the protective la
yer
from the underside of
each End Ramp and place them in
the designated l
ocation as illustrated in
Figure 5.1.
STEP
6
.
Now you can assemble the
Pla
yer Rods (P14-P20). First slide the end of the player rod
without the hole
on the end, through one side of the Side
P
anel (P2) hole. Add a
Plastic Washer (P13),
Bumper (P11), Steel
Washer (P12), Home or
Away Men (P20) or (P1
9)
,
(depending on which ro
d you are assembling)
another
ste
el
washer
,
washer, washer
bumper and plastic washer before continuing the rod th
rough the opposite side of the side
panel. Secure the men in place with Bolt (H9) and Nut (H7) as shown in Figure 6.2. Apply the Handle (P14)
to the end of the player rod with the hole through it using Screw (H8). If done correctly, while standing in
playing position, your men should be facing your right.
Continue th
is step f
or all of the Player rods in the following order:
is step for all of the Player rods in the following order:is step f
Off ensive
3 player rod,
Off ensive
2
player rod,
De
fensive
3 player rod,
Off ensive
5
player rod,
De
fensive
5
player rod,
Off ensive
3 player rod,
De
fensive
2
player rod,
De
fensive
3 player rod
Once the rods are assembled correctly, add the Cup holders (P22).
Notice the face on the “front”
Notice the face on the “front”
of the men. This side should face
of the men. This side should face
the opposing goal.
H4
P7
P6
P8
P7
P6
H3
P21
P15
P14
P14
H8
P14
P18
H6
P10
P16
P17
P13
P1
3
FIG. 5.1
FIG. 6.1
FIG. 6.1
FIG. 6.
FIG. 6.
2
P
rotective la
yer
rotective layerrotective la
P11
P13
P1
2
H9
H7

DMI Sports For Customer Service Call 1.800.399.4402
H1
H2
H3
H4
H5
H6
H7
H8
H9
H10
A1
A2
P1
P2
P3
P4
P5
P6
P7
P8
P
9
P10
P
11
P12
P1
3
P14
P15
P16
P1
7
P18
P19
P20
P21
P22
RP
FT
5
00-
HKIT
RP
FT500
-
HKIT
RP
F
T500
-
HKIT
RP
FT
500-
HKIT
RP
FT
500-
HKIT
RP
FT
500-
HKIT
RP
FT500
-
HKIT
RP
FT500
-
HKIT
RP
FT500
-
HKIT
RP
F
T
500-
HKIT
RP
FT
-
FT-FT
BALL
RP
FT
-
FT-FT
5MMTOOL
RP
FT
500
-
E
PANL
RP
FT500-
S
PANL
RP
FT500-
FIELD
RP
FT500-
GOAL
RP
FT500-
LEG
RP
FT500-
LRAMP
RP
FT500-
R
RAMP
RP
FT500-SRAMP
RP
FT
500-
LEV
RP
FT500-
ENTRY
RP
FT500-
BUMPER
RP
FT500-S
WASH
RP
FT500-
PWASH
RP
FT500-
HANDL
RP
FT500-
CAP
RP
FT
5
00-5ROD
RP
FT
500-2ROD
RP
FT
500-3ROD
RP
FT500-
AWAY
RP
FT
500-HOME
RP
FT
500-SCORE
RPFT500-CUPHOLD
5/16” x 2-1/2” Bolt
5/16” Black Washer
F4 x 1” Screw
3/8” X 1.5” B
olt
3/8”
Washer
1/2” Screw
Lock Nut
T5 x 15MM Screw
#8 x 1.375” Screw
P4 x 1.5” Screw
Sand Blasted Ball
5mm Allen Wr
ench
End
Panel
Side
Panel
Playing Field
Goal
L
eg
Left End Ramp
Right End Ramp
Side Ramp
Side Ramp
Leg Leveler
Ball Entry Cup
Rubber Rod Bumper
Steel Washer
Plastic Washer
Handle
Rod Cap
5 Player Rod
2 Player Rod
2 Player Rod
3 Player Rod
3 Player Rod
Away Player
Home Player
Slide Scorer
Cup Holder
UNIT
PRICE
TOTAL
AMOUNT
Subtotal:
PA Residents Add 6% State Sales Tax
:
Shipping and Handling Charges:
TOTAL:
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
PARTS RE-ORDER FORM
FT500
Soccer
Table
DATE:
NAME:
ADDRESS:
CITY:
PHONE:
STATE:
ZIP CODE
:
Send this form along with your
check or money order payable to:
DMI SPORTS
375 Commerce Drive
Fort Washington, PA 19034
www.dmisports.com
.75
.25
.75
.25
.50
.25
.25
.25
.25
.25
2.50
1.00
40.00
30.00
25.00
10.00
5.00
1.00
.50
3
.00
5.00
3.00
1.00
1
.00
1.00
1.00
.50
5.00
5.00
5.00
5.00
2.00
5.00
3.00
SHIPPING AND HANDLING:
Up to $15.00 add $2.00 for S&H
Over $15.00 add $8.00 for S&H
Console add $5.00 for S
&H
Away Player
REF
PART #
DESCIPTION
QTY
4
4
24
16
16
6
26
8
26
12
2
1
2
2
1
2
4
2
2
2
4
2
16
16
16
8
8
2
2
4
12
12
4
2