DOBE TY-1803 User manual

Product Introduction:
1
This product is a Bluetooth controller receiver, is suitable
for wireless controller connection to the console. Insert
the receiver into the PC or N-S console base, and when it
receives the Bluetooth controller signal you can play the
controller. One receiver can only be connected to one
Bluetooth controller. Once successfully connected, the
transparent light guide will emit blue light. Besides, it can
be automatically reconnected again next time. This
product is strong in connection compatibility, small and
portable, simple and convenient to use.
User Manual
Product No.: TY-1803
Code Button
USB male port
Transparent
light guide
Version Number: A0
1. Code Button: It is used to switch the light display to
inform the receiver of the mode and state at this time.
When the product is inserted into the device, the LED
light flashes slowly, indicating that the product is in the
tie-back mode. At this time, press the button and the
product will enter the Bluetooth device pairing mode.
During the pairing, the transparent light guide at the end
of the product will be display light.
2. Transparent light guide: The light guide color is blue.
There are several different LED lighting modes according
to the working status.
Function Introductions:
3
Product Pictures:
3
2

1. Compatible platform: PC, after successful connection, it
will enter the X-input mode by default, and you can play
on the game platform such as Steam; Android TV box;
N-S Console base.
2. Compatible devices: P-4 Bluetooth controller; P-5
controller; X-One S/X Bluetooth controller (only
compatible with version 5.11.311.80 and lower version,
not support the latest version); N-S Pro controller.
3. One receiver can only be connected to one Bluetooth
controller. PC or N-S console base can be plugged into
multiple receivers at the same time.
2.1. The LED light blinking slowly: The Bluetooth device is
not connected, or enters the tie-back mode.
2.2. The LED light flash: The receiver enters the pairing
state and is being searched for connection.
2.3. The LED light steady on: The receiver is successfully
connected to Bluetooth device.
Compatible platforms and devices:
4
The connection mode of controller devices can refer to
the Bluetooth search steps. First, we need to open the
controller according to the operation mode correspond-
ing to the controller model, so that the controller can
enter the Bluetooth search mode. Then plug the USB
male connector of the receiver into the USB interface of
PC equipment or N-S console base (When connecting
the N-S console base, you must enable the wired
connection option on the console. Otherwise, the
receiver cannot be used), and the LED will light flashes
Instructions for Bluetooth Connection of Receiver:
5

slowly. Then press the code button once, and the LED
light turns to flash, and the receiver enters the pairing
mode. When the LED light stops flashing and turns to
steady on, it indicates that Bluetooth connection is
successful and can be used. This product has the
function of automatic memory device. If there is already a
connected controller device, pressing the pairing button
to connect it back automatically. Different types of
controller connection mode is as follows:
1. Description of Bluetooth connection of P-4 controller:
When the controller is in normal power status, press and
hold the SHARE+PS key on the P-4 controller for 4-5
seconds. Then the controller channel light will flash
quickly, indicating that the controller has entered the
pairing state. Release the key and the controller enters
the Bluetooth search mode. At this time, plug the
receiver into the device, press the pairing button of the
receiver, and the LED light of the receiver will flash
quickly to enter the pairing mode to connect.
2. Description of Bluetooth connection of X-One S/X
controller (only compatible with version 5.11.311.80 and
lower version, not support the latest version): When the
controller is in normal power status, press the X-B key to
wake up the controller, and the light of the controller
flashes slowly. Then press and hold the pairing key at the
front of the controller, and the light will flash quickly,
indicating that the controller has entered the pairing
mode. At this time, plug the receiver into the device to be
connected, and press the pairing button of the receiver
to enter the pairing mode to search for the connection.

1. Working Voltage: DC 5V
2. Working Current: ≤40mA
3. Bluetooth Version: 5.0
4. Bluetooth Distance: The effective distance is 8-10m
Technical parameters:
6
3. Description of Bluetooth connection of P-5 controller:
When the controller is in normal power status, press and
hold the SHARE+PS key on the controller for 4-5 seconds
and the channel light of the controller will flash quickly,
indicating that the controller has entered the pairing
state. Release the key, and the controller enters
Bluetooth search mode. At this time, plug the receiver
into the device, press the pairing button of the receiver
and the LED light will flash into the pairing mode to
connect.
4. Description of Bluetooth connection of N-S Pro
controller:
When the controller is in normal power status, long press
the pairing button of Pro controller, and the LED light
inside the controller will start to flash slowly to enter the
pairing state. Plug the receiver into the device, press the
button of the receiver, and the LED light will flash quickly
into the pairing mode to connect.

In order to use this Bluetooth product correctly and
ensure its good performance, please read it carefully and
follow the instructions:
1. When using this product, please ensure that the
controller has Bluetooth wireless function and the battery
power is normal. If the controller is used in a low power
state, Bluetooth connection will be affected and
Bluetooth disconnection will occur.
2. When connecting the N-S console base, you must
enable the wired connection option on the console.
Otherwise, the receiver cannot be used.
3. After the Bluetooth connection is successful, the PC
console needs to be used on game platforms such as
Steam, and the controller cannot be directly on the PC
desktop.
4. At present, the product does not support vibration
transmission to P-5 controller, other controllers support
vibration transmission.
5. P-4 and P-5 controller gyro can be used on N-S
console, while X-B controller does not have gyro function.
6. The product can be matched with a variety of wireless
Bluetooth controller to connect to PC terminal or
Android TV box. After successful connection, X-input
mode will be entered by default. After long press PS
(HOME) button for 3-4 seconds, the LED on the receiver
will change from steady to off. Release the PS key to
switch the mode to D-input mode, which can be played
on Steam and other game platforms.
7. DO NOT seriously impact this product.
8. DO NOT contact benzene, thinner and other
chemicals.
9. Please keep away from strong magnetic fields and
electric fields.
10. Please avoid direct light or heating equipment.
Notice:
7

产品简介:
1
本产品为一款蓝牙手柄接收器,适用于无线手柄连接主机使用，
将接收器插入到PC电脑主机或N-S主机底座，与蓝牙手柄配对连
接成功后，即可对手柄进行操控。下次再使用自动回连，一个接
收器连接一个蓝牙手柄，接收器工作时透明导光件发出蓝光。此
产品连接兼容性强，小巧便携，使用方式简单。
使用说明书
产品型号: TY-1803
对码按键
USB公头
透明导光件
版本号: A0
1. 对码按键 :用于切换灯光显示接收器此时所在的模式与状态。
产品插入设备, LED慢闪处于回连模式，按压对码按键, 产品进入
蓝牙设备配对模式 ，配对时产品尾部透明导光件有灯光显示。
2. 透明导光件： 导光件灯光显示颜色为蓝色，根据不同的工作
状态有以下几种不同的LED灯光模式。
2.1 LED灯光慢闪：表示未连接蓝牙设备，或进入回连状态搜索
模式。
2.2 LED灯光快闪：接收器进入配对状态，正在搜索设备进行连
接。
2.3 LED灯光常亮：表示接收器已经跟蓝牙设备成功连接。
功能介绍:
3
产品图片:
3
2

1. 支持平台：电脑PC端，连接成功默认进入X-input模式，可在
电脑Steam等游戏平台游玩；安卓电视盒子；N-S主机底座。
2. 兼容设备：P-4蓝牙手柄；P-5手柄；X-One S/X蓝牙手柄（只
有兼容版本5.11.311.80和较低的版本，不支持最新版本）；N-S
Pro手柄；
3. 一个接受器只可连接一个蓝牙手柄，PC电脑主机或N-S主机底
座可同时插入多个接收器使用。
本产品可支持平台及兼容设备如下：
4
手柄设备连接方式参考其蓝牙搜索步骤。首先我们需要按照手柄
型号对应的操作方式将手柄开启，让手柄进入到蓝牙搜索模式。
然后将接收器插入到PC电脑主机或N-S主机底座的USB接口上（
在使用N-S主机底座时，需要开启主机上设置的有线连接选项，
否则无法使用），接收器的灯光为慢闪处于回连模式，此时需要
按压一下配对按键，接收器灯光显示为快闪，接收器进入配对模
式。当接收器停止闪烁,灯光显示常亮表示连接成功，手柄可正
常使用。本产品具有自动记忆设备功能，若已有连接过的手柄设
备，按一下配对键可自动回连，不同类型手柄连接方式如下：
蓝牙连接说明：
5

2. X-One S/X手柄（只有兼容版本5.11.311.80和较低的版本，不
支持最新版本）蓝牙连接说明：
在手柄正常电量状态下，先按X-B键唤醒手柄，手柄上的灯光慢
闪。然后按住手柄前端的配对键，手柄灯光进入快速闪烁，说明
此时手柄已进入配对模式。此时将接收器插到所需连接的设备上
面，按一下接收器的配对按键进入配对模式即可搜索连接。
1. P-4手柄蓝牙连接说明：
在手柄正常电量状态下，同时按住P-4手柄上的SHARE+PS键4-5
秒，原装手柄通道灯快速闪烁，表示已进入配对状态，释放按键
，手柄进入蓝牙搜索模式。此时将接收器插到设备上面，按一下
接收器的配对按键，接收器LED灯快速闪烁进入配对模式即可连
接。
3.P-5手柄蓝牙连接说明：
在手柄正常电量状态下，同时按住手柄上的SHARE+PS键4-5秒，
手柄通道灯快速闪烁，表示已进入配对状态，释放按键，手柄进
入蓝牙搜索模式。此时将接收器插到设备上面，按一下接收器的
配对按键,LED快闪进入配对模式即可连接。

1. 工作电压: DC 5V
2. 工作电流: ≤40mA
3. 蓝牙版本：蓝牙5.0
4. 蓝牙距离： 8-10M
技术参数:
6
4.N-S Pro手柄蓝牙连接说明：
在手柄正常电量状态下，长按Pro手柄的配对按键，手柄内侧
LED灯开始慢闪进入配对状态，将接收器插到设备上面，按一下
接收器的按键，LED灯快闪进入配对模式即可连接。

为了使用者正确使用本产品，确保产品性能良好，请认真阅读并
遵守：
1.使用本产品,请确保手柄具备蓝牙无线功能且电池电量正常，如
手柄在低电状态使用会影响蓝牙连接，出现蓝牙断连现象。
2.在使用N-S主机底座时，需要开启主机上设置的有线连接选项
，否则无法使用。
3.在使用PC电脑主机时，需要在Steam等游戏平台使用，直接在
电脑桌面是无法操控手柄的。
4.目前暂不支持震动传输到P-5手柄,其他手柄均支持震动传输。
5.P-4、P-5手柄陀螺仪支持在N-S主机上使用，X-B手柄无陀螺仪
功能。
6.可匹配多款多样的无线蓝牙手柄连接电脑PC端或安卓机顶盒，
连接成功默认进入X-input模式，长按PS(HOME)键3到4秒，接收
器上的LED会由常亮变为熄灭，松开长按的PS键，可将模式进行
切换为D-input模式，可在电脑Steam等游戏平台游玩。
7.切勿严重撞击本蓝牙产品
8.切勿接触苯、稀释剂等化学药品
9.请避开直射光线或发热器具；
10.请不要靠近强磁场、电场。
注意事项:
7