Dop Choice OCTA 7 User manual

DoPchoice
PRODUCT INSTRUCTIONS &
SAFETY INSTRUCTIONS
3.) Release the Velcro
®strips. 4.) Push in the 2 upper rods first to the RABBIT-EARS ®–
continue with all other rods.
1.) Unpack and unfold the
SNAPBAG
®OCTA 7.
2.) Push the rod extensions to the front and connect them
to the other rod-end.
5.) Attach the Velcro
®strips to the end of the SNAPBAG ®.
Make sure the SNAPBAG
®is on full tension by utilizing
the Velcro
®strips before installing the diffusor.
A B C
➔➔
➔➔
➔➔
➔➔
➔➔
➔➔
DoPchoice GmbH · Machtlfinger Str. 21 · 81379 Munich (Germany) · T [phone] · [email protected] · www.dopchoice.com
HOW TO ASSEMBLE THE OCTA 7
OPERATING INSTRUCTIONS – BEDIENUNGSANLEITUNG
dopchoice.com/instructions/
SAFETY INSTRUCTIONS

DoPchoice
PRODUCT INSTRUCTIONS &
SAFETY INSTRUCTIONS
HOW TO DISASSEMBLE THE OCTA 7
OPERATING INSTRUCTIONS – BEDIENUNGSANLEITUNG
2.) Release the Velcro
®strips to take off the
tension on the rods.
1.) Take off the diffusor, fold it together and
put it back into the plastic bag.
3.) Pull out the rod ends on the RABBIT-EARS
®–
start with the lower ones first.
4.) Release the rod extensions and pull them back to the
very end of the white elastics.
5.) Fold the SNAPBAG
®together
as shown in the picture.
6.) Important: the rod extensions must be pulled back to the
very end in order to fold the SNAPBAG
®as shown in the picture!
7.) Put the SNAPBAG
®back into the
designated transportation bag.
➔➔
➔➔
➔➔
DoPchoice GmbH · Machtlfinger Str. 21 · 81379 Munich (Germany) · T [phone] · [email protected] · www.dopchoice.com