Dop Choice SNAPBAG S User manual

DoPchoice GmbH · Machtlfinger Str. 21 · 81379 Munich (Germany) · T [phone] · [email protected] · www.dopchoice.com
DOME instructions: Put the DOME on an even surface and push it down as shown in picture 1. By pushing the DOME down, the
internal steel-stirrup approaches the two metal hooks as shown in picture 2. Make sure the steel-stirrup slides into the two hooks.
In order to fold up the DOME, please push it down again and slide the steel-stirrup out of the two metal hooks.
SNAPBAG instructions: Unfold the SNAPBAG by pulling up the metal rods as shown in picture 3. The metal rods will click into place
at the mechanical stop. In order to fold up the SNAPBAG please push the release buttons as shown in picture 4.
➔➔
1
➔➔
2
3
➔➔
4
SNAPBAG
®& DOME for ARRI ®ORBITER ®
OPERATING INSTRUCTIONS – BEDIENUNGSANLEITUNG
PLEASE ALSO REFER TO THE LUMINAIRE INSTRUCTIONS REGARDING USE OF ACCESSORIES.
L2.0033840 SBAOBS DOPCHOICE SNAPBAG S FOR ORBITER
L2.0034266 SBAODS DOPCHOICE DOME S FOR ORBITER
L2.0034267 SBAODM DOPCHOICE DOME M FOR ORBITER
L2.0034268 SBAODL DOPCHOICE DOME L FOR ORBITER
L2.0034269 SBAOB4 DOPCHOICE OCTA 4 FOR ORBITER
L2.0034270 SBAOBM DOPCHOICE SNAPBAG M FOR ORBITER

MOUNTING POINT FOR
THE SAFETY CABLE
Always secure the accessory
with a suitable safety cable
from falling in case the primary
mounting method fails.
DoPchoice GmbH · Machtlfinger Str. 21 · 81379 Munich (Germany) · T [phone] · [email protected] · www.dopchoice.com
SNAPBAG
®& DOME for ARRI ®ORBITER ®
OPERATING INSTRUCTIONS – BEDIENUNGSANLEITUNG
PLEASE ALSO REFER TO THE LUMINAIRE INSTRUCTIONS REGARDING USE OF ACCESSORIES.
Installing the DOME and the SNAPBAG to the ORBITER:
Tilt up the ORBITER as shown in picture 5. Attach the adapter ring to the front mounting plate of the ORBITER.
Please lock the adapter ring by rotating it clockwise until the mechanical stop.
Safety attachment: Always secure the DOME and the SNAPBAG with a suitable safety cable when the primary mounting method
fails, as shown in picture 6 and 7.
5
6 7
➔➔
➔➔
Read also our additional safety
& handling instructions:
www.dopchoice.com/instruction
The universal QLM adapter creates a direct mounting point for Orbiter
specific DoPchoice products. The digital optic interface communicates
with the optics attached and automatically makes adjustments to the color
output if required. Damages on the interface can cause mal- or disfunction
of the Orbiter.
L2.0033840 SBAOBS DOPCHOICE SNAPBAG S FOR ORBITER
L2.0034266 SBAODS DOPCHOICE DOME S FOR ORBITER
L2.0034267 SBAODM DOPCHOICE DOME M FOR ORBITER
L2.0034268 SBAODL DOPCHOICE DOME L FOR ORBITER
L2.0034269 SBAOB4 DOPCHOICE OCTA 4 FOR ORBITER
L2.0034270 SBAOBM DOPCHOICE SNAPBAG M FOR ORBITER