Dop Choice SNAPBAG OCTA 5 User manual

DoPchoice
PRODUCT INSTRUCTIONS &
SAFETY INSTRUCTIONS
3.) Release the Velcro
®strips. 4.) Push in the 2 upper rods first to the RABBIT-EARS ®–
continue with all other rods.
1.) Unpack and unfold the
SNAPBAG
®OCTA.
2.) Push the rod extensions to the front and connect them
to the other rod-end.
5.) Attach the Velcro
®strips to the end of the SNAPBAG ®.
Make sure the SNAPBAG
®is on full tension by utilizing
the Velcro
®strips before installing the diffusor.
A B C
➔➔
➔➔
➔➔
➔➔
➔➔
➔➔
DoPchoice GmbH · Machtlfinger Str. 21 · 81379 Munich (Germany) · T [phone] · [email protected] · www.dopchoice.com
ONLY OCTA 7
DISASSEMBLE THE OCTA 5&7
OPERATING INSTRUCTIONS – BEDIENUNGSANLEITUNG
PLEASE ALSO REFER TO THE LUMINAIRE INSTRUCTIONS REGARDING USE OF ACCESSORIES.
L2.0016159 / SBARO5
L2.0016165 / SBARO7
L2.0016163 / SRADBO5
L2.0016160 / SRADBO7
dopchoice.com/instructions/
SAFETY INSTRUCTIONS

DoPchoice
PRODUCT INSTRUCTIONS &
SAFETY INSTRUCTIONS
DISASSEMBLE THE OCTA 5&7
OPERATING INSTRUCTIONS – BEDIENUNGSANLEITUNG
PLEASE ALSO REFER TO THE LUMINAIRE INSTRUCTIONS REGARDING USE OF ACCESSORIES.
2.) Release the Velcro
®strips to take off the
tension on the rods.
1.) Take off the diffusor, fold it together and
put it back into the plastic bag.
3.) Pull out the rod ends on the RABBIT-EARS
®–
start with the lower ones first.
4.) Release the rod extensions and pull them back to the
very end of the white elastics.
5.) Fold the SNAPBAG
®together
as shown in the picture.
6.) Important: the rod extensions must be pulled back to the
very end in order to fold the SNAPBAG
®as shown in the picture!
7.) Put the SNAPBAG
®back into the
designated transportation bag.
➔➔
➔➔
➔➔
DoPchoice GmbH · Machtlfinger Str. 21 · 81379 Munich (Germany) · T [phone] · [email protected] · www.dopchoice.com
ONLY OCTA 7
ONLY OCTA 7
L2.0016159 / SBARO5
L2.0016165 / SBARO7
L2.0016163 / SRADBO5
L2.0016160 / SRADBO7