DOPPELGANGER DMT204-BK User manual

Instruction Manual
Handy Digital Weighing Scale
DMT204-BK
Document Serial Number: 20140625
Instruction manual
Thank you very much for purchasing this product.
In order to use it safely, please be sure to read the instructions carefully and use it correctly.
Also, please keep this manual carefully after reading it.
■Before use
•This product is intended to measure the weight of the target easily. Do not use for anything
other than its intended purpose.
•We take every possible measure for quality, but please confirm before use that there is no
damage.
•If this product is damaged, do not use it.
•This product does not guarantee the measurement result or the result of using it.
■Name of each part

■Description of each part
•LCD screen: Displays the measured value, unit, and each mark.
•① Button: Used to turn the power on/off and reset the HOLD function.
•UNIT button: Used to switch the unit of "kg" "N" "oz" "lb" "°C".
•Reset button: Used to reset the measured values, or press and hold to switch to the HOLD
function.
•Attachment strap: The part to hang the object to be measured.
■Product specifications
•Measurable weight range: up to 44 kg
•Product weight: 183 g
•Power supply: 2 x AAA batteries (included)
•Material: ABS shelf effect (body, knock (knuckle), knee (strap)
•Country of origin: China
■How to use
1. Press the ① button and set the power supply to ON, then “HELLO” is displayed on the LCD
screen.
2. Measurement can be performed when 0.00kg is displayed on the LCD screen in about 3
seconds.
3. Press the UNIT button and select the unit you want to measure from among “kg”, “N”, “oz”,
and “lb”.
4. Remove the buckle and thread the strap through the object you want to measure. Make sure
that you hear a clicking sound when locking and that it is firmly locked.
5. Hold the machine firmly and gently lift it while keeping it level with the ground.
6. Read the measured value displayed on the LCD screen.
7. After the measurement, slowly lower the object and remove the buckle.
■How to use HOLD function
1. Perform steps 1 and 2 above to make measurement ready.
2. Press and hold the Reset button for 2 seconds or longer, with a beeping sound. “H-ON” is
displayed on the LCD screen and the HOLD function is turned on.
3. Follow steps 3 to 6 above to weigh.

4. When the numerical value becomes constant, a beep sounds and the measured numerical
value is fixed.
5. To reset the fixed value, press the Reset button or the ①button.
6. To cancel the HOLD function, press and hold the Reset button for 2 seconds or longer. H-OFF is
displayed on the LCD screen and the HOLD function is turned off.
■Tare measurement method (weight measurement method excluding container)
1. Refer to steps 1 to 6 of the usage method and weigh the tare (container) only.
2. Press the Reset button during measurement, and the numerical value display on the LCD screen
will change to "0.00kg".
3. It is possible to measure only the target object by putting the target object in the container in
this state.
* The set tare (container) weight is after removing the tare (container). It can be canceled by pressing
the Reset button.
* During tare subtraction measurement, + is displayed at the bottom of the LCD screen.
* The tare weight measurement function can be used even when the HOLD function is on.
■ Notes on using
•This product is a precision instrument. Please handle it carefully.
•If you feel any abnormality during use, stop using it immediately.
•This product is not drip-proof or waterproof. Do not use in rainy or humid places.
•When measuring, hold the product body firmly and lift it slowly. Suddenly lifting the luggage
may cause a malfunction.
•The measurable load capacity of this product is 44 kg. Do not use beyond the load capacity, as it
may cause a malfunction.
•Remove the batteries when storing. Depending on the storage environment, there is a risk of
leakage if the battery is stored.
•Do not use any batteries other than AAA batteries. It may not operate properly and may cause
a malfunction.
•The included battery is a test battery for operation check. Replace with a new battery as soon
as possible please.
•Use and store the product out of reach of children.
•When disposing, please follow the disposal regulations of each local government.

WARNING : Indicates the contents that may cause death or serious injury.
•Do not disassemble or modify. It may cause overheating, fire or electric shock.
•Do not put the product in fire, heat it, heat it, use it with water or other liquids, and leave it
unattended. It may cause heat generation, fire, or explosion.
•Do not use with wet hands. It may cause fever or electric power.
CAUTION : Possibility of injury or property damage
•Do not use in any place other than 0 °C to 40 °C. It may cause heat generation and burst.
•Do not use or leave the product in a place subject to direct sunlight, high temperature, high
humidity, or high vibration for a long time. It may cause heat generation, fire, or explosion.
•Do not place anything on it or subject it to strong impact. It may cause overheating, fire, electric
shock or injury.
•Be careful not to pinch your fingers or skin when changing the battery or when changing the
battery. There is a risk of injury.