Dorel Ameriwood 9151202WP User manual

B349151202WP00
9151202WP
STOP
1-800-489-3351
Need Parts or Assistance?
WWW.AMERIWOOD.COM/PARTS
If a part is missing or damaged, visit our website or call our toll-free
customer service line. We will gladly ship your replacement parts
FREE of charge.
For prompt, reliable service please have your assembly manual ready.
DO NOT RETURN PRODUCT TO THE STORE
Individual stores do not stock parts.
or call toll free:
Recommended # of people needed for assembly: 2
(however it is always better to have an extra hand.)
Estimated assembly time is 2 hours.
Spanish translations are located in the center of this manual.
Se localizan las traducciones españolas en el centro de este
manual.
THIS INSTRUCTION BOOKLET CONTAINS
IMPORTANT SAFETY INFORMATION. PLEASE
READ AND KEEP FOR FUTURE REFERENCE.
Date of Purchase
___ / ___ / ___
Please Recycle
Recicle Por Favor
A Dorel Company
MERIWOOD
INDUSTRIES
TM
0 29986 915139

B349151202WP00
3 /28
Parts
left panel
39118202010 right panel
39118202021 left partition
39118202030 right partition
39118202040
modesty panel
39118202101
desk top
39151202110
right fixed shelf
39118202140 left bottom
39118202150 right bottom
39118202160 left kick
39118202170 right kick
39118202180
left apron
39118202190
right apron
39118202200 front crown molding
39118202210 left lower crown molding
39118202220 right lower crown molding
39118202230
left door
39118202280
ABCDJ
O
NPQR
K
S
TUVWBB

B349151202WP00
4 /28
Parts
right door
39118202291
pencil drawer front
39118202300 2 pencil drawer sides
39118302310
pencil drawer back
39118302320 keyboard drawer front
39118202330 left keyboard
drawer side
39118202340
right keyboard
drawer side
39118202350
keyboard drawer back
39118202360 keyboard drawer bottom
39118202370 file drawer front
39118202380 left file drawer side
39118302390 right file drawer side
39118302400
file drawer back
39118302410 pencil drawer bottom
K911830280 file drawer bottom
K911830270
left back panel
K911820230 right back panel
K911820240
cam lock
#A22430
qty: 20
cam bolt
#A22440
qty: 20
shelf support
#A80250
qty: 3
CC DD EE FF GG HH
II JJ KK LL MM NN
OO PP QQ 12
plastic catch
#A30030
qty: 4
3
3a 3b
grommet
#A70040
qty: 2
45
8-32 x 7/8"
machine screw
#A17400
qty: 10
6
flap hinge
#A60500
qty: 2
7
RR SS

B349151202WP00
5 /28
Hardware
angle bracket
#A53600
qty: 12
7/16" flat head
screw
#A11080
qty: 22
1-1/4" flat head screw
#A11600
qty: 8
#4 x 1/2" flat head
screw
#A09130
qty: 10
drawer bracket
#A53760
qty: 8
euro screw
#A15600
qty: 16
hinge
#A60010
qty: 4
file holder
#A82120
qty: 2
extension slide
#A56540
qty: 1
cup pull
#A52416
qty: 5
1-3/4" flat
head screw
#A13410
qty: 11
1" washer head screw
#A12840
qty: 8
nail
#A21110
qty: 36
1/2" pan head
screw
#A12210
qty: 66
8910 11
12
13
14 15 16 17 18
19 20 21

B349151202WP00
6 /28
21
43
This illustration shows how the CAM fastening system works.
Esta ilustracion muestra el sistem de fijacion del tornillo de cerradura.
drawer slide
#A56030
qty: 2
22a 22b
22c
22d
A09130 (X10)
#4 x 1/2" flat
head screw
14
A11080 (X22)
#6 x 7/16" flat
head screw
A21110 (X40)
nail
A53760 (X8)
drawer bracket
15
16
A53600 (X12)
angle bracket
17
18
A15600 (X16)
drawer screw
9
A11600 (X8)
#6 X 1-1/4" FLT
10
A12840 (X8)
#8 X 1" W/H
11
12
A12210 (X66)
#8 X 1/2" pan
head screw
13
A13410 (X11)
#8 X 1-3/4" FLT
5
A80250 (X4)
shelf support
1
A22430 (X20)
12mm cam lock
6
A17400 (X10)
#8-32 X 7/8"
machine screw
7A60500 (X2)
flap hinge
8
A60010 (X2)
hinge
A60010 (X2)
hinge
8
A22440 (X10)
24mm cam bolt
2
2
A22440 (X10)
24mm cam bolt
3
4
A30030 (X2)
plastic catch
A70040 (X2)
50mm grommet
HARDWARE COMPARTMENT LAYOUT
A30030 (X2)
plastic catch
3

1
B349151202WP00
7 /28
-Insert four CAM LOCKS (1) into the RIGHT FIXED SHELF (N), LEFT BOTTOM (O),
and RIGHT BOTTOM (P) as shown.
Proper orientation of CAM LOCK
Orientation propio del tornillo de cerradura
x 12 N
O
P
1
1
1
1
1
1

2
B349151202WP00
8 /28
x 2
x 2
x 3
x 1
A
Proper orientation of CAM LOCK
Orientation propio del tornillo de cerradura
Insert two CAM LOCKS (1) and screw two CAM BOLTS (2) into the LEFT PANEL (A) as shown.
Attach one LEFT CABINET MEMBER (22a) to the LEFT PANEL (A) with three SCREWS (15) as shown.
Fasten one ANGLE BRACKET (18) with one SCREW (12) as shown in the detail.
1
2
15
15
2
1
22a
15
18
12
18
x 1
12
x 1
22a

3
B349151202WP00
9 /28
Proper orientation of CAM LOCK
Orientation propio del tornillo de cerradura
x 2
x 2
x 6
x 2
x 1
x 1
C
C
turn over
de la vuelta
x 1
Attach one LEFT CABINET MEMBER (22a) to the LEFT PARTITION (C) with three SCREWS (15).
Turn the panel over and attach one RIGHT CABINET MEMBER (22b) with three SCREWS (15).
On the same side insert two CAM LOCKS (1), screw two CAM BOLTS (2) and attach one PLASTIC
CATCH (3a) with two SCREWS (12). Fasten one ANGLE BRACKET (18) with one SCREW (12) as
shown in the detail.
1
1
2
15
12
3a
15
15
12
3a
22a
22b 22b
22a
15
15
2
18
12
18
x 1

4
B349151202WP00
10 /28
B
Proper orientation of CAM LOCK
Orientation propio del tornillo de cerradura
Insert two CAM LOCKS (1) and screw four CAM BOLTS (2) into the RIGHT PANEL (B).
Seperate the EXTENSION SLIDE (21) by extending it until it stops, depress the plastic lever and pull apart. Complete this procedure for both slides. Attach
slide to the RIGHT PANEL with three SCREWS (12). Fasten one ANGLE BRACKET (18) with one SCREW (12) as shown in the detail.
USE THESE THREE HOLES WHEN ATTACHING SLIDE.
USE ESTOS TRES AGUJEROS AL ATAR LA DIAPOSITIVA.
PLASTIC LEVER
x 2
x 4
x 4
x 1
1
2
12
21
1
2
21
21
12
18
x 1
12
18

5
B349151202WP00
11 /28
x 2
x 4
x 3
x 6
x 1
x 1
x 1
Proper orientation of CAM LOCK
Orientation propio del tornillo de cerradura
D
D
turn over
de la vuelta
Attach one RIGHT CABINET MEMBER (22b) to the RIGHT PARTITION (D) with three SCREWS (15).
Turn the panel over and attach one EXTENSION SLIDE (21) with three SCREWS (12). On the same surface insert two CAM
LOCKS (1), screw in four CAM BOLTS (2), and attach one PLASTIC CATCH (3a) with two SCREWS (12). Fasten one ANGLE
BRACKET (18) with one SCREW (12) as shown in the detail.
1
2
15
12
3a
15
22b
D
1
2
3a
12
12 1212
15 15 15
22b
21
21
18
x 1
18
12

6
B349151202WP00
12 /28
Screw eight CAM BOLTS (2) into the DESK TOP (K).
Attach the FRONT CROWN MOLDING (U) to the DESK TOP (K) with five ANGLE BRACKETS (18) and ten SCREWS (12).
NOTE: If you use the optional hutch (model 9902202W), refer to the model 9902202W hutch
assembly manual to attach the desk top to the hutch assembly. Four holes need to be redrilled
into through holes (only if the hutch is used).
x 10
x 5
K
x 8
2
2
12
18
18
12
12 U

7
B349151202WP00
13 /28
x 4
1" (2.5cm)
This step will require the assistance of a second person.
Secure the LEFT PARTITION (C) and RIGHT PARTITION (D) to the MODESTY PANEL (J) with
four SCREWS (13).
If assembled correctly, there will be a 1" (2.5cm) spacing between the top edge of the partitions
and the top edge of the modesty panel.
J
D
C
13
13
13
J
D

8
B349151202WP00
14 /28
UNLOCK LOCK
APRETAR
DESAPRETAR
Align the LEFT PANEL (A) and LEFT PARTITION (C) with the LEFT BOTTOM (O) so that the CAM BOLTS (2) insert into the CAM
LOCKS (1). Turn the CAM LOCKS (1) clockwise to lock in place.
Align the RIGHT PANEL (B) and RIGHT PARTITION (D) with the RIGHT BOTTOM (P) and RIGHT FIXED SHELF (N) so that the
CAM BOLTS (2) insert into the CAM LOCKS (1). Turn the CAM LOCKS (1) clockwise to lock in place.
finished edge
acabado borde
NOTE THE HOLE LOCATIONS.
OBSERVE LAS LOCALIZACIONES DE LOS AGUJEROS
A
B
C
D
J
N
P
O2
1

9
B349151202WP00
15 /28
Align the left and right
assemblies with the DESK TOP
(K) so that the CAM BOLTS (2)
insert into the CAM LOCKS (1).
Turn the CAM LOCKS (1)
clockwise to lock in place.
NOTE: Adjust the moldings (S,
T, V, W) for best fit when
attaching them to the unit with
the SCREWS (11).
A
K
CD
B
J
S
T
W
V
x 8
UNLOCK LOCK
APRETAR
DESAPRETAR
NOTE: IF YOU HAVE PURCHASED THE OPTIONAL
HUTCH, DO NOT ASSEMBLE THIS STEP UNTIL THE
HUTCH HAS BEEN ASSEMBLED. YOU WILL NEED TO
FOLLOW THE DIRECTIONS IN THE MODEL 9902202WY
ASSEMBLY MANUAL, (THERE ARE FOUR HOLES THAT
MUST BE DRILLED THROUGH TO ATTACH THE DESK
TOP (K) TO THE HUTCH PANELS).
11 11 11
1
2

10
B349151202WP00
16 /28
x 3
x 10
Attach the LEFT KICK (Q) to the LEFT PANEL (A), LEFT PARTITION (C), and LEFT BOTTOM (O) with three ANGLE BRACKETS (18) and four
SCREWS (12).
Attach the RIGHT KICK (R) to the RIGHT PANEL (B), RIGHT PARTITION (D), and RIGHT BOTTOM (P) with four angle brackets (18) and six
SCREWS (12).
Align both KICKS so that the mitered corner is tight by loosening the SCREWS (11) and (12), adjusting and retightening the screws.
QR
A
B
D
C
P
O
12
18
12
18
12 12
11
18
121812 12 12
18

11
B349151202WP00
17 /28
With assistance of another person, carefully stand the unit upright.
Position the LEFT BACK PANEL (RR) so the bottom edge of the back panel is even with the bottom edge of the LEFT BOTTOM
(O), and equally spaced side to side. Fasten the LEFT BACK PANEL (RR) to the unit using eighteen NAILS (16).
NOTE: When you begin to nail the back panel to the unit, make sure the unit is square with the back panel
and nail straight through into the back edges of the unit.
Repeat this procedure to fasten the RIGHT BACK PANEL (SS) to the unit.
Por favor asegúrese que las Parte de atrás se atan
firmemente. Todos los clavos deben manejarse en las
partes recto y deben apretarse firmemente. El fracaso para
hacer para que podría causar inestabilidad, derrumbamiento
del producto, y/o la lesión seria.
ADVERTENCIA
Please make sure that Back Panels are attached securely.
All nails must be driven into the parts straight, centered and
tightened firmly. Failure to do so could cause instability,
product collapse, and/or serious injury.
WARNING
x 36 RR
SS
K
A
B
D
C
J
O
P
raw surface
superficie cruda raw surface
superficie cruda
16
16

12
B349151202WP00
18 /28
x 4
x 4
x 8
x 8
x 2
x 1
x 1
plastic lever
palanca plástica plastic lever
palanca plástica
LR
EE EE
MM NN
Attach one LEFT DRAWER RUNNER (22c) to the PENCIL DRAWER SIDE (EE) with two SCREWS (15) and two
DRAWER BRACKETS (17) with two DRAWER SCREWS (9).
Attach one RIGHT DRAWER RUNNER (22d) to the other PENCIL DRAWER SIDE (EE) with two SCREWS (15) and two
DRAWER BRACKETS (17) with two DRAWER SCREWS (9).
Attach the drawer members of the EXTENSION SLIDES (21) to the LEFT and RIGHT FILE DRAWER SIDES (MM &
NN) with two SCREWS (12) and two DRAWER BRACKETS (17) with two DRAWER SCREWS (9) each.
12
15
9
17
21
21 21
12 12
15 15
99
99
99
17 17
17 17
17 17
17 17
99
22c
22d
22c 22d

13
B349151202WP00
19 /28
x 2
x 3
x 8
x 4
EE EE
DD
LL
NN
MM
Attach the PENCIL DRAWER SIDES (EE) to the PENCIL DRAWER FRONT (DD) with four DRAWER SCREWS (9).
Attach the LEFT and RIGHT FILE DRAWER SIDES (MM and NN) to the FILE DRAWER FRONT (LL) with four DRAWER
SCREWS (9).
Attach one CUP PULL (19) with two BOLTS (6) onto the PENCIL DRAWER FRONT (DD) and the FILE DRAWER FRONT (LL).
Insert SHELF SUPPORTS (5) into each of the drawer fronts.
19
5
9
6
19
19
55
6
9
6
9

14
B349151202WP00
20 /28
DD
EE
EE
PP
FF
finished surface
superficie terminada
x 4
Slide the PENCIL DRAWER BOTTOM (PP) down the grooves in the PENCIL DRAWER SIDES (EE) until it is
tight against the PENCIL DRAWER FRONT (DD).
Attach the PENCIL DRAWER BACK (FF) with four SCREWS (10).
10
10
10