Dorel DAS001413 User manual

DAS001413(Taupe Linen)
DAS001412(Gray Linen)
DAS001409(Navy Linen)
Date of Purchase
C.W. - 2021/05/12
Lot Number(TAKEN FROM CARTON)
Thank you for purchasing from Dorel!
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
1
©
Weight Limit: 250 lb / 113 kg
DO NOT RETURN TO THE STORE !
I f parts are missing or damaged, we will gladly ship your
replacement parts free of charge.
Visit www.dhpfurniture.com/eng/replacement-parts
or call Toll-Free 1-800-267-1739
You can also chat with us at www.dhpfurniture.com
B34DAS00141300-260307-ZQ
Counter Stool
Set of 2
2021 Dorel Home Products All Rights Reserved

2
1-800-267-1739
DHP Consumer Services
12345 Albert Hudon, Suite 100,
Montreal, Quebec H1G 3L1
[e-mail]
is
Limited 1 year Warranty
This warranty does not apply to any product which has been improperly
Visit www.dhpfurniture.com
Contact Us!
Read Before Beginning Assembly
Dorel
Monday to Friday
Saturday
Sunday
9am to 9pm (Eastern Time)
10 am to 6:30 pm (Eastern Time)
11 am to 7 pm (Eastern Time)
powertools
Chat
with us! www.dhpfurniture.com
This product is packaged in
1 carton
15 mins

3
PARTS
C
F
E
G
D
B
A

4
PART
DAS001413
T807320
T807330
T807340
T807350
T807360
T807370
T807380
T807390
T807400
T807340
T807350
T807360
T807370
T807380
T807410
T807420
T807340
T807350
T807360
T807370
T807380
D
C
B
A
(Taupe Linen)
DAS001412
(Gray Linen)
DAS001409
(Navy Linen)
S LIST
A
X 2 PCS X 2 PCS
Back Frame Seat Frame Right Front Leg
X 2 PCS X 2 PCS X 2 PCS X 2 PCS
Left Front Leg Left Stretcher Right Stretcher Front Stretcher
X 2 PCS
BC D E F G
Each part has a unique part number. Please reference the appropriate part
number when contacting customer service for replacement parts.
Before throwing any packaging, please verify all contents and make sure you
have received all the parts listed above!
G
F
E

Please do not completely tighten all the hardware,
until the entire assembly is complete, unless
otherwise indicated in the step-by-step
instructions.
The screw(s), bolt(s) to be used at each step are
shown in actual size in the lower right corner of the
page.
HARDWARE LIST
Hardware Pack
DAS001413
(Taupe Linen)
(Gray Linen)
(Navy Linen)
DAS001412
DAS001409
HP#:TDAS001413-00
2
3
2
22
42 52 6
2
1
ALLEN KEY
1 PC
Ø5/16 " x 2 3/8"
SCP12
BOLT
Ø5/16" x 3 1/2"
SCP8
BOLT
Ø5/32" x 1 3/4"
SCP12
SCREW
Ø12.5 X 1.2mm
SCP02
FLAT WASHER
Ø22 X 1.8mm
SCP02
FLAT WASHER
5

s a
Place back frame Aon a clean,smooth surface.
Remove the fabric lining underneath seat
frame B.
Attach the seat frame Bto back frame Awith
flat washers ,spring washer nd hex
socket head bolts through the center of
the seat frame B.
Use Allen key to tighten the bolts.
6
23
1
6
A
B
23
1
6
X 2X 2
X 2
1
3
2
Note: Do not fully tighten the bolts. Leaving
them slightly loose will facilitate assembly
the
in the following steps.

7
X 4
4
2
2
3
4
6
X 4X 4
3
2
Secure seat frame Bto back frame Awith
flat washers ,spring washers and
hex socket head bolts .
Use Allen Key to tighten the bolts.
23
6
4
Note:Do not fully tighten bolts.
A
B

Attach legs C& Dto seat frame Bwith bolts ,
flat washers and spring washers using
8
3
A
B
D
C
E
F
G
6
1
3
2
2 3
6
1
X 4X 4
X 4
1
3
2
Insert left front leg C,right front leg D, left
stretcher F, right stretcherE& front stretcher
Ginto seat frame B& back frame Aas shown
below.
Allen key .
Note: Do not fully tighten the bolts. Leaving
them slightly loose will facilitate assembly in
the
the
following steps.
FRONT
FRONT

Attach stretchers E, F, Gto legs D, C, Awith
screws . Use a Phillips head screwdriver
(not included) to tighten the screws.
9
4
X6
5
5
5
A
B
D
C
E
F
G

10
5
Turn the chair upright. Once leveled,
tighten all bolts previously installed with
Allen key and place the fabric lining
bof seat frame Aack into place.
Note: fThe ront legs are equipped with
adjustable levelers. Before placing this
item in the desired location, make sure
that the chair rests evenly on the floor
by turning the adjustable levelers
clockwise or counterclockwise as needed.
6