Dorel DA7319-6BL User manual

Model No:
UPC CODE:
0-65857-17354-3 (BLUE)
0-65857-17355-0 (WHITE)
Lot number:
(TAKEN FROM CARTON)
______________________
THIS INSTRUCTION BOOKLET
KEEP FOR FUTURE REFERENCE.
Date of purchase:
_______ / _______ / _______
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
NOTE:
INSTRUCTION MANUAL
DA7319-6BL (BLUE)
DA7319-6W (WHITE)
MILES
DESK CHEST
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer
service department. We will replace the part FREE of
charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
* Unless specifically designed to accommodate, do not set TVs or other heavy objects on
top of this product.
* Never allow children to climb or hang on drawers, doors or shelves.
* Never open more than one drawer at a time.
* Do not defeat or remove the drawer interlock system.
* Use of tipover restraints may only reduce, but not eliminate, the risk of tipover.
CARE AND CLEANING
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage
finish. Excessive exposure to sunlight and extreme changes in temperature and moisture
can damage wood furniture.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Dorel warrants its product to be free from defects in material and workmanship and agrees
to remedy any such defect. This warranty covers 1 year from the date of original purchase.
This warranty is valid only upon presentation of proof of purchase. This is solely limited to
the repair or replacement of defective furniture components and no assembly labor is
included. This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
This warranty gives you specific legal rights and you may also have other rights which vary
from State to State.
* Place heaviest items in the lower drawers.
* CAUTION: Maximum weight capacity for writing shelf is 25 lbs. (11 kgs)
* Assemble on a soft, smooth surface to prevent damage to the product finish.
* Use the wall safety strap provided to secure the unit to the wall.
* A Phillips head screw driver is not included.
* DO NOT use power tools.
* CAUTION: Adult assembly required.
* Assembly will require two people.
* Do not use the unit if it is damaged or broken.
* To avoid unnecessary damage, when levelers have been extended, DO NOT drag across
surface when moving. Be sure to lift and carry the item to its location.
* Estimated assembly time: 45 minutes.
WARNING
Serious or fatal crushing injuries can occur from furniture tipover. To help prevent
tipover:
* Install tipover restraint provided.
* Ensure all parts and components are present before beginning assembly.
CUSTOMER SERVICE
If you have any questions about this product, contact our customer service representative
first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
E-MAIL: [email protected]
NOTES

HARDWARE LIST
1 2 3
4 5 6
7 8 9
10 11 12
13 14 15
LARGE CAM BOLT
28 PCS
LARGE WOOD DOWEL
26 PCS
LARGE CAM LOCK
28 PCS
Miles Desk Chest
DA7319-6BL / DA7319-6W
Ø8 X 30mm
Ø3 X 15mm
Ø4 X 25mm
ROUND HEAD SCREW
8 PCS
MAGNETIC CONNECTOR
2 PC
LARGE SCREW
17 PCS
Ø3 X 15mm
Ø6 X 20mm
ROUND HEAD SCREW
26 PCS
SMALL CAM BOLT
12 PCS
SMALL WOOD DOWEL
12 PCS
Ø5/32" x 15mm
SMALL CAM LOCK
12 PCS
LARGE BOLT
20 PCS
HANDLE
10 PCS
STICKER
8 PCS
LEFT METAL BRACKET
1 PC
RIGHT METAL BRACKET
1 PC

HARDWARE LIST
16 17 18
19 20
SMALL SCREW
12 PCS
LEFT HINGE
1 PC
RIGHT HINGE
1 PC
Miles Desk Chest
DA7319-6BL / DA7319-6W
Ø3 X 15mm
Ø3/16 X 15mm
SMALL BOLT
4 PCS
SAFETY STRAP
1 KIT

PARTS LIST
A B C D
E F G H
I J K L
M N O P
TOP PANEL
MIDDLE SHELF
BACK TOP RAIL
TOP SMALL SHELF
Miles Desk Chest
DA7319-6BL / DA7319-6W
1 PC
1 PC
1 PC
1 PC
DIVIDER
LEFT SIDE PANEL
RIGHT SIDE PANEL
FRONT MIDDLE RAIL
1 PC
1 PC
1 PC
2 PCS
FRONT BOTTOM RAIL
BACK BOTTOM PANEL
BACK TOP PANEL
BACK MIDDLE PANEL
1 PC
1 PC
1 PC
1 PC
DRAWER FRONT
DRAWER LEFT SIDE
DRAWER RIGHT SIDE
DRAWER BOTTOM
3 PCS
3 PCS
3 PCS
3 PCS

PARTS LIST
Q R S
DRAWER BOTTOM RAIL
DRAWER BACK
WRITING SHELF
Miles Desk Chest
DA7319-6BL / DA7319-6W
3 PCS
3 PCS
1 PC

STEP 1
Miles Desk Chest
DA7319-6BL / DA7319-6W
Insert large cam bolts (1) into the top panel (A) and middle shelf (B) as shown.

STEP 2
Miles Desk Chest
DA7319-6BL / DA7319-6W
Insert large wood dowels (2) into the top panel (A) as shown.
Attach back top rail (C) to the top panel (A) with large screws (6) using a Phillips head screwdriver
(not included).
Attach magnetic connector (5) to the top panel (A) with round head screws (4) and a Phillips head
screwdriver (not included).

STEP 3
Miles Desk Chest
DA7319-6BL / DA7319-6W
Insert top small shelf (D) into divider (E) as shown.
Insert large wood dowels (2) and large cam locks (3) into divider (E) as shown.
Attach the assembled unit to top panel (A) and middle shelf (B) and secure them by rotating the
large cam locks (3) 1/2 turn clockwise using a Phillips head screwdriver.

STEP 4
Miles Desk Chest
DA7319-6BL / DA7319-6W
Insert large cam bolts (1) into left and right side panels (F & G) as shown.

STEP 5
Miles Desk Chest
DA7319-6BL / DA7319-6W
Insert large wood dowels (2) into the left side panel (F) as shown.
Insert large cam locks (3) into top panel (A), middle shelf (B), front middle rails (H), front bottom
rail (I) and back bottom panel (J) as shown.
Attach all parts to left side panel (F) and secure by rotating the large cam locks (3) 1/2 turn
clockwise using a Phillips head screwdriver (not included).

STEP 6
Miles Desk Chest
DA7319-6BL / DA7319-6W
Repeat step 5 to attach the right side panel (G) to the assembled unit.
NOTE- The side panels (F & G) are equipped with adjustable levelers. Once assembly is complete
and the unit is in the desired location, rotate the adjustable levelers clockwise or counterclockwise
until it rests evenly on the floor.

STEP 7
Miles Desk Chest
DA7319-6BL / DA7319-6W
Attach back top panel (K) and back middle panel (L) to the assembled unit using round head
screws (7). Use a Phillips head screwdriver (not included) to tighten the screws.

STEP 8
Insert small wood dowels (9) and small cam locks (10) into the drawer left side (N) and drawer right
side (O).
Miles Desk Chest
DA7319-6BL / DA7319-6W
Insert small cam bolts (8) into the drawer front (M).
Attach drawer sides (N & O) to the drawer front (M) and secure them by rotating small cam locks
(10) 1/2-turn clockwise using a Phillips head screwdriver (not included).

STEP 9
Attach drawer bottom rail (Q) to drawer front (M) as shown.
Miles Desk Chest
DA7319-6BL / DA7319-6W
Slide the drawer bottom (P) into the grooves of drawer sides (N & O) and drawer front (M).

STEP 10
Miles Desk Chest
DA7319-6BL / DA7319-6W
Attach drawer back (R) to the drawer sides (N & O) and drawer bottom rail (Q) with large screws
(6).
Attach handles (12) to drawer front (M) with large bolts (11).
Use a Phillips head screwdriver (not included) to tighten the screws (6) and bolts (11).
Repeat steps 8 to 10 to assemble the other drawers.

STEP 11
Miles Desk Chest
DA7319-6BL / DA7319-6W
Insert all drawers into the assembled unit.

STEP 12
Miles Desk Chest
DA7319-6BL / DA7319-6W
Attach the left and right metal brackets (14 & 15) to the side panels (F & G) using small screws
(16). Use a Phillips head screwdriver (not included) to tighten the screws..

STEP 13
Miles Desk Chest
DA7319-6BL / DA7319-6W
Attach left and right hinges (17 & 18) to the side panels (F & G) using round head screws (4). Use a
Phillips head screwdriver (not included) to tighten the screws.

STEP 14
Miles Desk Chest
DA7319-6BL / DA7319-6W
Attach handles (12) to writing shelf (S) with large bolts (11).
Use a Phillips head screwdriver (not included) to tighten the bolts.
Attach the stickers (13) to the flip down panel as shown to cover the bolts.