Dosel DOSMXMFSG500 User manual
1
112
213
314
415
516
617
718
819
920
1021
1122
23
100
200
500
1005
300100
500
300
5
45
230
35012520
67
p
89
Measuring cup can be used to add ingredients during operation.
Grinder Assembly
1. Put the motor base on the at and dry platform..
2. Turn anticlockwise to take off the grinder cup from base, put
ingredients into cup and hold on, then turn clockwise the grinder cup &
base to make them xed rmly.
3. Put above grinder assembly onto motor base, turn clockwise to make
the safety lock xed well.
4. Aware that switch should be in “0”speed, plug in and use pulse “P”
1-2 times as pre-grinding, then choose”1”or”2”speed for grinding.
5. Do not work continuously exceed 30s, stop 1 min for motor cool
down. You can choose the cycle times according to your favor.
HOW TO DISASSEMBLE
1. Remove pusher. Turn cover counterclockwise, lift and remove.
2. Lift blade holder from driver.
3. Lift blade and remove from blade holder.
4. Turn bowl counterclockwise to unlock from motor base. Lift and
remove.
CLEANING
Wash all parts except motor base in warm, soapy water. The discs can
be disassembled to wash with water, but be careful during disassembly.
DO NOT IMMERSE MOTOR BASE IN WATER.
TROUBLESHOOTING
Problem Solution
Machine does not work.
Ensure correct assembly.
Make sure power plug is plugged
in properly.
Check if the mains have tripped,
or if there is a power outage.
Machine stops running suddenly.
Processing bowl may loosen
during vigorous processing.
Please re-install the bowl cover.
Motor is running, while
components do not run.
Make sure the Driver is installed
correctly.
98
6. Place cover on bowl, turn clockwise until cover locks on bowl.
7. Place pusher into feeding chute
Processed Food Measurement per
batch
Time per batch
Egg 2~5pcs 30~70sec
Cheese 125~350ml 20sec
Notes (Emulsifying Disc):
- Emulsifying Disc can be used to mix cheese and egg, to make
mayonnaise and pudding rapidly.
- Do not use Emulsifying Disc to knead our.
Slicing blade, Coarse grating blade, Fine grating blade Assembly
1. Position Driver on motor base.
2. Position processing bowl into the Driver and turn clockwise to seat
rmly on motor base.
3. Install desired blade onto the blade holder.
4. Place blade holder onto the Driver.
5. Place cover on bowl
6. Turn cover clockwise until cover interlocks on bowl.
7. Put food into the feeding chute.
8. Use pusher to push the food down for processing.
Notes:
- Choose desired disc according to the processed food and desired shape
of food.
- Push softly when feeding food.
- Pre-cutting food into smaller pieces according to the diameter of
feeding tube.
- Feed gradually for better effect. When cutting soft food, choose lower
speed to avoid the food turning soupy. If large quantity food needs to be
cut, please cut it for several batches. 1200ml for one batch.
Citrus Juicer Assembly
1. Position Driver on motor base.
2. Position processing bowl into the Driver and turn clockwise to seat
rmly on motor base.
3. Place citrus juicing plate & head on the bowl and turn 30 degrees
clockwise.
Notes (Citrus Juicer):
- Lower speed should be chosen for citrus juicer.
Blender Assembly
1. Make sure the blade base is xed tightly.
2. Put food into the jar.
3. Install measuring cup and cover properly.
4. Put blender jar onto motor base vertically, and then rotate the jar
clockwise to x it.
Tips and Warning
Choose PULSE function for pre-mixing is recommended before
operation.
1800ML for one batch.
Make sure the blade base is installed properly before operation.
76
ASSEMBLY
Processed Food Measurement Per batch
Chocolate ≤100g
Cheese ≤200g
meat ≤500g
Tea or Spice 50~100g
Fruit & Vegetable 100~300g
Onion ≤500g
Notes (Chopper) :
- Always keep the chopper inside the bowl before feeding food.
- Use pulse function for several times to avoid cutting too ne. Do not
run for too long while cutting hard cheese or chocolate. Otherwise these
materials will overheat and begin to melt.
- Standard chopping period: 30-60 sec.
Kneading blade Assembly
1. Position Driver on motor base.
2. Position processing bowl into the Driver and turn clockwise to seat
rmly on motor base.
3. Place blade adaptor onto the Driver.
4. Place kneading blade onto the blade adaptor.
5. Turn the kneading blade to the right position.
6. Place cover on bowl, turn clockwise until cover interlocks on bowl.
7. Place pusher into feeding chute
Processed Food Measurement per
batch
Flour / Soft Cheese ≤300g
Egg ≤5pieces
Notes (Kneading Disc):
- Always attach kneading disc in the bowl before feeding food.
- Standard kneading period: 30-180 sec.
Emulsifying plate Assembly
1. Position Driver on motor base.
2. Position processing bowl into the Driver and turn clockwise to seat
rmly on motor base.
3. Place blade adaptor onto the Driver.
4. Place Emulsifying plate onto the blade adaptor.
5. Turn the Emulsifying plate to the right position.
54
3
2
1
1 Motor Base 12 Kneading blade
2 Driver 13 Emulsifying plate
3 Processing Bowl 14 Citrus Juicing Plate
4 Blade Adapter 15 Citrus Juicing Head
5 Bowl Cover 16 Blender Measuring Cup
6 Pusher 17 Blender Jar Cover
7 Blade Holder 18 Blender Jar
8 Slicing blade 19 Blender Blade
9 Coarse grating blade 20 Transmission Head
10 Fine grating blade 21 Grinder base
11 Chopper 22 Grinder cup
Table of contents
Languages:
