KitchenAid 5KFP0719A User manual

5KFP0719A
W11279640B.indd 1 10/18/2018 2:23:02 PM

2 | PARTS AND FEATURES
PARTS AND FEATURES
PARTS AND ACCESSORIES
Heavy-duty
base
Power cord and
cord storage
(not shown)
Lid latch
Drive pin
Lid hinge
Handle hinge
Reversible
slicing/shredding
disc
Drive adapter Multipurpose
stainless steel
blade
Work bowl
cover with
2-in-1 feed
tube
2-piece
food pusher
1.7 L (7-cup)
work bowl
Dough blade
Slicing blade
W11279640B.indd 2 10/18/2018 2:23:03 PM

ENGLISH
FOOD PROCESSOR SAFETY | 3
FOOD PROCESSOR SAFETY
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed, including
the following:
1. Read all instructions. Misuse of appliance may result in
personal injury.
2. To protect against risk of electrical shock, do not put
Food Processor in water or other liquid.
3. Turn the appliance OFF, then unplug from the outlet
when not in use, before assembling or disassembling
parts and before cleaning. To unplug, grasp the plug
and pull from the outlet. Never pull from the power
cord.
4. This appliance is not intended for use by persons,
(including children) with reduced physical, sensory,
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instructions concerning use of the appliance by a
person responsible for their safety.
5. Children should be supervised to ensure they do not
play with the appliance.
W11279640B.indd 3 10/18/2018 2:23:03 PM

4 | PARTS AND FEATURES
FOOD PROCESSOR SAFETY
6. Avoid contacting moving parts.
7. Do not operate any appliance with a damaged cord or
plug, or after the appliance malfunctions, or is dropped
or damaged in any manner. Return appliance to the
nearest Authorised Service Centre for examination,
repair, or adjustment.
8. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
9. The use of attachments not recommended or sold by
KitchenAid may cause fire, electric shock, or injury.
10. Do not use the appliance outdoors.
11. Do not let cord hang over edge of table or counter.
12. Be careful if hot liquid is poured into the Food
Processor as it can be ejected out of the appliance due
to sudden steaming.
13. Keep hands and utensils away from moving blades or
discs while processing food to reduce the risk of severe
injury to persons or damage to the Food Processor. A
scraper may be used, but must be used only when the
Food Processor is not running.
14. Blades are sharp. Care should be taken when handling
the sharp cutting blades, emptying the jar, and during
cleaning.
15. To reduce the risk of injury, never place cutting blade
or discs on base without first putting bowl properly in
place.
16. Be certain cover is securely locked in place before
operating appliance.
17. Never feed food by hand. Always use the food pusher.
18. Do not attempt to defeat the cover interlock
mechanism.
19. Do not fill the bowl above the marked maximum fill line
(or rated capacity) to avoid risk of injury due to damage
to the cover or bowl.
W11279640B.indd 4 10/18/2018 2:23:03 PM

ENGLISH
PARTS AND FEATURES | 5
FOOD PROCESSOR SAFETY
20. Refer to the “Care and Cleaning” section for
instructions on cleaning the surfaces in contact with
food.
21. This appliance is intended to be used in household and
similar applications such as:
- staff kitchen areas in shops, offices, or other working
environments;
- farmhouses;
- by clients in hotels, motels, and other residential type
environments;
- bed and breakfast-type environments.
SAVE THESE INSTRUCTIONS
ELECTRICAL REQUIREMENTS
Voltage: 220-240 V
Frequency: 50-60 HZ
NOTE: If the plug does not fit in the
outlet, contact a qualified electrician.
Do not modify the plug in any way.
W11279640B.indd 5 10/18/2018 2:23:03 PM

6 | USING THE FOOD PROCESSOR
USING THE FOOD PROCESSOR
ACCESSORIES SELECTION GUIDE
ACTION SETTING FOOD ACCESSORY
Chop 1 or O/Pulse
Cheese
Chocolate
Fruits
Fresh herbs
Nuts
Tofu
Vegetables
Multipurpose stainless steel blade
+
Mince or Purée 2 or O/Pulse
Mix 1
Pasta Sauce
Pesto
Salsa
Sauces
Batters
Slice
1
Fruit (soft)
Potatoes
Tomatoes
Vegetables (soft)
Reversible slicing/shredding disc
(slicing side) OR slicing blade
+
OR
+
2
Cheese
Chocolate
Fruits (hard)
Vegetables (hard)
Shred
(fine to medium)
1Potatoes
Vegetables (soft)
Reversible slicing/shredding disc
(shredding side)
+
2
Cabbage
Cheese
Chocolate
Fruits (hard)
Vegetables (hard)
Knead O/Pulse or 2 Yeast doughs
Dough blade
+
W11279640B.indd 6 10/18/2018 2:23:04 PM

ENGLISH
USING THE FOOD PROCESSOR | 7
BEFORE FIRST USE
1
Lift up the lid latch to unlock the
cover. Tilt the work bowl cover back
and lift it straight up so that the lid
hinge pulls out of the handle hinge.
2Remove all parts and accessories
from the work bowl, and lift the food
pusher out of the feed tube.
1
Place the work bowl on the base,
aligning the handle with the raised
button on the right side of the base.
The bowl will click into place and
should be flush against the base
when properly aligned.
2Place the drive adapter in the work
bowl, lowering it onto the drive pin.
USING THE FOOD PROCESSOR
Before using your Food Processor for the first time, wash all parts and accessories either
by hand or in the dishwasher (see the “Cleaning the Food Processor” section). Your Food
Processor is designed so that all accessories may be stored inside the work bowl.
ASSEMBLING THE FOOD PROCESSOR
IMPORTANT: Place the Food Processor on a dry, level countertop with the controls
facing forward. Do not plug in the Food Processor until it is completely assembled.
W11279640B.indd 7 10/18/2018 2:23:04 PM

8 | USING THE FOOD PROCESSOR
USING THE FOOD PROCESSOR
NOTE: For ease of assembly, install the desired blade or disc before attaching
the work bowl cover.
NOTE: Your Food Processor will not
operate unless the work bowl cover is
fully closed and the work bowl is properly
seated on the base.
3To attach the work bowl cover, push
the lid hinge into the handle hinge on
the work bowl and close the cover.
4Once the work bowl cover is closed,
push the lid hinge down into the
locked position.
INSTALLING THE MULTIPURPOSE BLADE OR DOUGH BLADE
1Place the blade on the drive adapter.
Rotate the blade so it falls down to
the base of the adapter.
2Install the work bowl cover, making
sure the lid latch is pushed down to
the locked position.
W11279640B.indd 8 10/18/2018 2:23:05 PM

ENGLISH
USING THE FOOD PROCESSOR | 9
USING THE FOOD PROCESSOR
INSTALLING THE REVERSIBLE SLICING/SHREDDING DISC OR
SLICING BLADE
1
To slice: Turn the disc so that the
raised slicing blade is facing up.
To shred: Turn the disc so that the
small, raised shredding blades are
facing up.
The disc can be placed in two different
positions: high at the top of the bowl
for processing, and low in the bowl for
storage.
NOTE: While the disc will operate in
storage position, it will not perform as
well. Make sure the disc is level with the
top of the bowl for best performance.
2
Hold the disc by its centre hub and
lower it onto the drive adapter,
aligning the marks on the centre
hub of the disc to the marks on the
adapter. The disc should be level with
the top of the bowl. If the disc falls to
the storage position, lift it out, turn it
90°, and lower it again.
3Install the work bowl cover, making
sure the lid latch is pushed down to
the locked position.
Process
Storage
Alignment
marks
W11279640B.indd 9 10/18/2018 2:23:05 PM

10 | USING THE FOOD PROCESSOR
OPERATING THE FOOD PROCESSOR
Before operating the Food Processor, be
sure the work bowl, blades, and work bowl
cover are properly assembled on the base
(see the “Assembling the Food Processor”
section).
Rotating Blade Hazard
Always use food pusher.
Keep ngers out of openings.
Keep away from children.
Failure to do so can result in
amputation or cuts.
USING THE FOOD PROCESSOR
1
To turn on, press 1 or 2. The Food
Processor will run continuously and
the indicator light will glow.
To turn off, press 1 or 2 again, or
press O/Pulse.
2
To use the Pulse function:
Press O/Pulse for short bursts,
or press and hold for longer bursts.
The Pulse function runs at high
speed only. The Food Processor will
turn off when the O/Pulse button is
released.
W11279640B.indd 10 10/18/2018 2:23:06 PM