DPVIDEO DZP906 User manual

CAR DVD/VCD/CD/MP3/MPEG-4 PLAYER WITH
USB PORT
English Version
Warning:
Watching TV whiledriving is illegal inmost states.
There is asafety feature onthis device whichenables viewing videosonly when parked.
All other featuresmay still beused while driving,such as audioand radio, etc,but must bedone with care.
Please contact anauthorized installer for professional installation
PWRPWR
SOURC ESOURC E
11
EQEQ LOUDLOUD
2233
445566
778899
00
BANDBAND
TITLETITLE
AMSAMS
MENUMENU
LOCLOC
SUB-TSUB-T
STST
AUDIOAUDIO
RPTRPT RDMRDM
GOTOGOTO
ANGLEANGLE
OSDOSD
PROGPROG
ZOOMZOOM
P / NP / N
SETUPSETU P
ENTERE NTER
VOL+VOL+VOLVOL SELSEL
CLEARC LEAR
DZP906
7.0 INCH WIDE SYSTEM DISPLAY / DVD PLAYER
TOUCH-SENSITIVE PANEL CONTROL
ANGL E ANGL E

Common Operations
3
To Select Source by Menu 18
Reset the Unit 18
Turning the Unit On/Off 18
Volume Control 18
Setting the Sound Characteristics 18
EQ Setting 19
Turning Loudness On/Off 19
Eject a Disc 19
Insert a SD Card 19
Mute Function 19
Mode Selector 19
Infrared Sensor 19
00
2
Contents
Installation
Wiring Connections 12
Install the Unit 13
Detach the Unit 15
Install the Front Panel 16
Detach the Front Panel 16
clean the connector 17
2
1Before You Start
Important Safeguards 4
About this manual 4
Precautions 5
Maintenance 6
Location & function of the controls 7
Remote control 9
Specifications 11
1
5Main Menu
Main Menu Setup 20
Video Adjust 20
Audio Adjust 21
Source Setup 21
System Adjust 21
4
DVD/VCD/MP4
55
DVD/VCD/MP4 Setup 25
DVD/VCD/MP4 Play 25
Selecting Tracks Fast 25
Number Buttons 25
Pause the Playback 25
Stop the Playback 25
Play tracks at Random 26
Repeat Playing 26
Skip backward/forward/F.F/F.REW the
Playback 26
System Switch 26
Slow Motion Playback 26
Increase Picture Size 26
On Screen Display 26
Setting the Playback Time 27
Changing Audio Language 27
Changing the Subtitle Language 27
Changing the Viewing Angle 28
Selecting Channel 28
Program Playing 28
Playing PBC(Menu) 28
Selecting Menu 29
DVD Setup Menu 29
6CD/MP3/SD/USB
CD/MP3/SD/USB Setup 36
CD/MP3/SD/USB Play 36
Selecting Tracks Fast 36
Repeat Playing 37
Number Buttons 37
Selecting Track 37
Stop Play 37
Playing Tracks at Random 37
Pause the Playback 37
Skip backward/forward/F.F/F.REW
the Playback 37
10

00
3
Contents
On Screen Display 38
Program Playing 38
Eject SD Card 38
Eject USB 38
AUX
AUX Touch Screen Menu 41
8
7Tuner
Listening to the Radio 39
Band Selector 39
Manual/Automatic Tuning 39
DX/LOC Selector 39
Selecting The stored Station 39
MO/ST Selector 40
Scanning/Memorizing Stations
Automatically 40
On Screen Display 40
Goto FREQ 40
Number Buttons 40
42
09
Additional Information
Simple Troubleshooting Guide 42
9
Additional Information
Simple Troubleshooting Guide
No power. Check and make sure whether the fuse is blown,
replace with the proper value if necessary.
Some errors occur in
LCD or no function
pressing the button.
the
when
Unable to receive stations.
Poor signal when receiving a
station.
CDs cannot be loaded.
Sound skips.
No images.
Images skip.
Press RESET button.
Check and make sure whether the antenna is
inserted or the antenna is properly connected, if
not, insert the antenna or connect it properly.
Antenna may not be the proper length. Make sure
the antenna is fully extended; if broken, replace
the antenna with a new one.
A CD is loaded in the mechanism.
The CD is dirty or damaged.
The Video line from main unit to the TV is not
connected properly.
Improper setting of the color system. Set the color
system according to the
connected television.
to PAL or NTSC
.
.
.
Note:
If any of the problems persist after the check list has been reviewed, consult your nearest service dealer.
Never attempt to disassemble your unit by yourself.
The following checklist might help to solve the problems which you meet when using
the unit. Please double check and make sure the connections are correct and you are following
the operating procedures before using the checklist below .
Problem Cause/Solution
.
.
.
.
.
The antenna is poorly grounded, check and make
sure the antenna is properly grounded at its
mounting location.
.
Due to continuous product improvement, the operations
of this model are subject to change.

Before You Start
41
08
AUX
AUX Touch Screen Menu
VOL+
VOL-
AV SET
AUXF
BT
SRC
VOL+
VOL-
AV SET
AUXR
BT
SRC
Press SRC to turn to AUXF SET:
Press SRC again to turn to AUXR SET:
AV SET
For more details to adjust AUDIO, VIDEO and
SYSTEM (Auto 1: PAL, NTSC, SECAM),
(Auto 2: P-M, P-N). To adjustAUDIO and
VIDEO please refer to pages 18 to 19.
To decrease the volume
To increase the volume
In AUX mode, select AV SET:
Bluetooth mode
Mode selector
AUDIO ADJUST
VIDEO ADJUST
BACK
IMPORTANT SAFEGUARDS About this manual
Be sure to connect the color coded leads
according to the diagram. Incorrect con-
nections may cause the unit to malfunct-
,
ion or damage the vehicle s electrical sy-
stem.
Be sure to connect the speaker (-) leads
to the speaker (-) terminal. Never conn-
ect the left and right channel speaker c-
ables to each other or to the vehicle body.
Make sure all the connections are comp-
letely correct before turning on your unit.
When replacing the fuse(s), the replace-
ment must be of the same amperage as
shown on the fuse holder.
Do not block vents or radiator panels. B-
locking them will cause heat to build up
inside and may result in fire.
This unit features a number of sophisti-
cated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
This manual primarily explains remote
control operation. However, in
addition to those functions related with
DVD/VCD/CD/MP3/MP4 operation
that can only be operated by the remote
control, there are also functions that can be
operated by the buttons provided on
the main unit.
Improvements and changes to this User
guide necessitated by typographical errors,
inaccuracies of current information, or
improvements to programs and/or equip-
ment, may be made by our company at
any time and without notice.
To prevent driver distraction, please
install the unit in an appropriate place.
Use the unit after starting the engine,
otherwise the unit can not be started, be-
cause the electric energy of the battery was
used up.
The unit must be protected from direct
sunlight, or the electric energy of the battery
will be wasted from the high temperature.
Do not use the unit in extreme high tem-
perature or extreme low temperature condi-
tions, and also avoid humidity and direct
sunlight.
Take care of the magnetism of the unit.
Do not put credit cards, cassettes or w-
atches around the unit, or they could be
broken or some information in them may be
lost.
To prevent disturbing the video frequency,
keep far away from the unit when using your
phone.
Do not put the remote control under high
temperature or in direct sunlight, or else the
remote control may not work normally.
12
1
2
3
4
5
6
7
8
9
10
11

01
5
Before You Start
40
07 Tuner
During radio status, you can press ST
button on the remote control MONO
mode or STEREO
to select
mode.
Stereo reception is charged when STEREO
appears.
It is switched to MONO mode when MONO
appears.
MO/ST Selector
It is only valid on remote control.
It is only valid in FM tuning.
6
Switch to MONO compulsively to improve
the listening quality when week signal.
Note:
*
*
*
Number Buttons
During radio status, Number Buttons
(from 1 to 6) can help you yo-
ur favorite station. You can follow the
as below:
store
steps
Press and hold AMS button to receive
stations automatically, and store them in
1 to 6 number respectively.
23
During radio status, press Number Buttons
to receive the stored stations.
4
When receiving a station,press and hold
any one of the Number Buttons
(from 1 to 6) until the number app-
ears on the LCD, which indicates that
station is already stored in the corresp-
onding number button.
Press and hold another number button
more than 2 seconds when listening in
a station in one number button s, the
station will be stored in that number
button.
1
2
3
Pressing in the monitor performs the same
function.
Note:
*5
Goto FREQ
2
Press GOTO, and the monitor shows:
FREQ, then press the Number to input the
valid frequency, then the TV program will
be played.
Note:
*It is only valid on remote control.
*It is only valid when GOTO FREQ is on in
main menu.
Scanning/Memorizing Stations
Automatically
During radio status, briefly press AMS
button on the remote control to scan each
stored seconds respectively wh-
ich Number Buttons (from 1
to . You can press responding N-
umber Buttons or ton when your
desired station is And it starts pl-
aying that station.
station 6
stored in
6) the cor
AMS but
charged.
23
4
When press and hold AMS ,
automatically memory storing
The radio automatically selects
and has it stored in any one of
Number Buttons (from1 to 6).
button it
will activate
function. a
station the
4
23
Note:
* The unit can be stored up to 6 stations for
each band.
* Pressing AMS on the screen also preforms the
same function.
On Screen Display
8
During radio status, press OSD to display
the edition information.
5
Handle the disc by its edge to keep
the disc clean, and do not touch the surface.
Do not attempt to modify the unit,
modifying the unit may cause an
accident.
Stop the vehicle before carrying
out any operation that could
interfere with your driving.
Do not use in extremely high or
low temperature. Be sure the
temperature inside the vehicle
is between +60 C and -10 C
before turning on your unit .
To enjoy optimum sound and
images while playing, handle the
discs as follows:
Do not use CDs with paste residue
or ink attached.
Do not use CDs with labels or stickers
attached, which may leave a sticky residue
while beginning to peel off.
(Shown in the picture)
Clean the discs with an optional clean-
ing cloth. Wipe each disc from the center out.
(Shown in the picture)
PRECAUTIONS
This unit can play the following discs only:
Type of disc
VCD
12cm
MP3
12cm
CD 12cm
NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.
12cm
DVD
Recorded material
Sound and moving
pictures
Sound and moving
pictures
Sound only
Sound only
Size of disc
MPEG-4
Sound and moving
pictures
12cm
USB
Sound and moving
pictures
Version 2.0
and less

Before You Start
01
639
07
Tuner
Listening to the radio
Band Indicator
Shows which band the radio is tuned
to.
1
Preset Number Indicator
Shows what preset has been selected.
2
Shows which frequency the tuner is
tuned.
Frequency Indicator
3
SEEK+/SEEK-
Briefly press to tune by the presettable
range, hold and press to tune automatically.
4
5
6BAND
To select the bands.
The 6 stations of the current band.
Briefly press to select station, hold and
press to save the current station to one
of the 6 stations.
Note:
FM2
MW2(AM2) MW1(AM1)
FM3
FM1
During radio status, repeatedly press
BAND button to select bands in
lowing order:
the
fol
Band Selector
3
(For Two Bands)
Manual/Automatic Tuning
Manual Tuning: Briefly press (
button on the remote control to select the
different band.
or )
Automatic Tuning: ressand
)button the radio
a station or respectively
and plays when it finds a station.
P hold ( or
automatically searches
downward upward
Note:
7MENU
Press it to enter MAIN MENU.
9SRC
Press this button to select the signal
source.
* Pressing BAND on the main unit or in the
monitor performs the same function.
6
LOC ON appears on the display and only
local station is available. when it disappears
both distance and local stations can be
received.
DX/LOC Selector
During radio status, press LOC button
to select or weak station reception.strong
5
The function is only valid on remote control.
The function is invalid in AM tuning.
Note:
*
*
Selecting the Stored Station
During radio status, press button to
select the stored station upward, press to
select downward.the stored station
27
Note:
The function is only valid on remote control.
*
Pressing in the monitor or pressing and
holding SEEK+/SEEK- also performs the same
function.
*4
8AMS
Press to scan the current station and
tune automatically.
87.50M 106.10M
107.90M
87.50M98.10M
90.10M
4
5
FM1 CH:1
-
+
BAND
7
MENU SRC
87.50MHz
8
AMS
Replacing the Fuse
Make sure the amperage matches the
specified value when replacing the fu-
ses. If the fuse is blown, check the po-
wer connection and replace with a n-
ew one. If the same problem occurs,
it may be a malfunction. In such cases,
please consult the nearest service dealer.
When the range of the card remote
control becomes short or no longer
functions, replace the lithium battery
with a new button cell (CR2025). Check
the battery polarity before replacing.
Precautions on Using Lithium
Battery
Always keep the lithium battery beyond
the reach of children. If s w a l l o w e d , s e e a
doctor immediately.
Clean the battery with a dry cloth to ensure
it is perfectly connected.
Make sure the polarity is correct when
loading the battery.
To prevent short circuit, do not use
metal tweezers to clip the battery.
Gently pull out the Battery Holder while
pressing the Stopper.
Put the button-type battery with mark(+)
upward into the Battery Holder.
Replacing the Battery
Insert the Battery Holder into the Remote
Control.
!
Maintenance
Warning
Never use a fuse with a rated
amperage more than that supplied to
yourunit, otherwise it will damage the
unit.
Warning!
Improper handling of the battery may
lead toexplosion.
It cannotbecharged,disassembled or
thrownintoa fire.
!

01
7
Before You Start
Location of the Controls
The Expanding
The Whole
O P E N
BA ND MU TE
A/V I N
PWR
SR C 1 2 3456
RPT R DM
VOL S EEK
MEN U
SEL
ANG LE AN GLE
O P E N
BA ND MU TE
A/V I N
PWR S RC 1 2 3456
RP T RDM
VOL S EE K
MEN U
SEL
ANG LE AN GLE
4
13
11
5 6 871 2
9
10
12
14
38
06 CD/MP3/SD/USB
During CD status, press OSD button the
display shows:
Single elapsed
Total
elapsed
Total
remain
Single remain
Note:
* This function is operated by using the remote
control.
On Screen Display
Program Playing
During CD mode, press PROG, the TFT
displays the program menu. Press NUMBER
BUTTONS to select the track Number and
then press to move the cursor to START,
press ENTER to start program playing;
move the cursor to EXIT and press ENTER
to exit the program playing. Move the cursor
to and press ENTER to the previous page;
move the cursor to and press ENTER to
the next page. During this process, press
to cancel the program playing.
13
18
The function is only valid on remote control.
Note:
*
27
* Press CLEAR to clear the mistake input.
22
Eject SD Card
Push SD card to eject it.
During SD playing mode, to eject SD card
to switch to Disc mode; if there is no disc
in the main unit, it will switch to USB mode,
or else, it will switch to Radio mode.
During other modes, to eject SD card to keep
the previous mode.
Eject USB
Pull USB to eject it.
During USB playing mode, to eject USB to
switch to Disc mode; if there is no disc in
the main unit, it will switch to SD Card mode,
or else, it will switch to Radio mode.
During other modes, to eject USB to keep
the previous mode.

Before You Start
01
8
REMOTE Infrared Sensor
RESET Button
SRC
Press it to switch the mode.
Press it to insert or eject a disc.
Eject Button
USB Socket
Disc Loading Slot
OPEN Button
MUTE Button
A/V IN
The Base
BAND (band selector) Button
REL (release the front panel) Button
1615
SEL/VOL (Power/Volume adjust/Setting of
the sound characteristics) Button
During the waitingmode, briefly press it to
turn on the unit, press and hold it toturn off
it. Rotate thebutton clockwise toincrease
the volume andanti-clockwise to decrease
it.
Briefly press itto set the sound characteristics
and rotate itto set the terms.
SD Socket
NUMBER Button/Pause/Stop/Repeat/RDM
During radio mode, press it to select preset
station.
During playback, the functions of
RPT RDM can be opened.
MENU/SEEK([Source Menu]/[Previous Track/
Adjust frequency forward/ Next Track/Adjust
frequency backward]) Button
37
* Pressing in the monitor or on the main
unit performs the sam function.
06
Repeat Playing
During CD/MP3/SD/USB playback, press
replay the current track, press
it again to cancel this function.
RPT to
15
* This function is operated by using the remote
control.
Note:
* The default setting is Disc Repeat.
* Press CLEAR to clear the mistake input.
22
Number Buttons
Press one of Number Buttons(0~9) to
select a track to play automatically.
23
* Press track region and the screen shows the
number keys, touch the number to select tracks.
Note:
Selecting Track
2
* This function is operated by using the remote
control.
Note:
* Press CLEAR to clear the mistake input.
22
During CD playback, first press GOTO,
and TFT shows : disc go to:--:--,press your
desired time of the playback by using num-
ber buttons.
Second press GOTO button, track go to:--:--
appears on TFT, also input your desired
numbers to play the current time of your
selection.
During MP3/SD/USB mode, first press
GOTO and the TFT shows:---. Then press
NUMBER BUTTONS to input the MP3/SD
track s Number to play it; secondly press
GOTO button, and the TFT shows : --:--,
now input the desired time to play the
current track at this point.
2
Stop Play
During CD/MP3/SD/USB playback, Press
to stop the playback.
18
* Pressing in the monitor perform the same
function.
Note:
Playing Tracks at Random
During CD/MP3/SD/USB playback,
RDM button on the remote control to
play random under the directory
which you select. P return to
press
any track at
ress it again to
normal playing.
16
* This function is operated by using the remote
control.
Note:
Pause the Playback
During CD/MP3/SD/USB playback, press
to switch between play and pause.
Note:
Press ( or ) on remote control to
perform fast reward or fast forward.
Skip backward/forward/F.F
/F.REW the playback
20
2 X 4 X 8 X 16X
Note:
CD/MP3/SD/USB
* Pressing and holding SEEK on the main unit
also performs the same function.
rewi nd

01
9
Before You Start
Remote Control
Tips:
For more information as to replacing battery, please refer to Replacing the Battery
on page 6.
1
2
3
4
5
7
20
6
8
9
10
11
12
13
14
15
16
17
18
19
21
22
23
24
26
27
25
36
06
During CD playback, touch the screen shows
the following menu:
CD/MP3/SD/USB Setup
Track region
During MP3/SD/USB playback, touch the
screen shows the following menu:
Track region
Scan the tracks
CARDCARD
To show SD card or USB
SELSEL
Sound characteristics
Decrease volume level, adjust some items
Increase volume level, adjust some items
Play/pause
Stop
Previous track
Next track
DVD setup menu
MODE
Mode selector
CD/MP3/SD/USB Play
Insert a CD/MP3 disc into the slot, the unit
will play automatically.
Take away the rubber plug USB or SD
card, then insert USB or SD card which
will be played automatically.
If there have be loaded a disc/USB/SD card,
press SOURCE to switch to play, or back
to play source to select menu, press DVD
to play.
Note:
*
816
Press SRC on the main unit to switch to DVD
mode. When SD card and USB were inserted
into, press this key again and again to switch
among SD card, USB and disc.
*
Pressing to turn to mode switch.
MODE
01:18
CD
01 Track
02 Track
03 Track
04 Track
05 Track
06 Track
CD
CD
CD
CD
CD
CD
Track 03/16
Track Region:
Press this region and the screen
shows the following menu:
number keys appears, touch the
number to select tracks.
Touch the " X" to exit this menu.
MP3
MP3
MP3
MP3
MP3
MP3
MP3
Demo
amour
Automatic
Be natural_s_e
Can you celebr
clon_bing bing
00:00
001/105
00:00
123
456
7 8 9
-- 0X
00:00
001/105
00:00
MP3
MP3
MP3
MP3
MP3
MP3
MP3
Demo
amour
Automatic
Be natural_s_e
Can you celebr
clon_bing bing
Selecting Tracks Fast
Note:
During MP3/SD/USB playback, press
to play previous track, press to play
next track.
During CD playback, first press to
return to the beginning of the current track,
press again within 3 seconds to play
previous track , press to play next track .
21
21
21
21
21
CD/MP3/SD/USB
* Pressing / button on the main unit or
and in the monitor perform the
same function.
* In CD/MP3/SD/USB mode, you can press
track s Number or name to play.
4
*
At present, our products can only support up to
16G of SD card or USB.
touching

Before You Start
10
01
SOURCE/PWR
AMS/MENU
BAND/TITLE
LOC/SUB -T
ST/AUDIO (mono or stereo/language or
channel selector)
OSD
Slow Forward/Rewind)
ANGLE
PROG(Program playing)
Mute
P/N( system adjusting)
ZOOM (zoom in or zoom out)
GOTO (playing time/track)
RPT(Repeat Playing)
RDM (Playing Tracks at Random)
VOL+/VOL-/SEL
Press it toshow the current information.
30
LOUD (loudness)
SETUP
(F.R/F.F)
CLEAR
0~9 (Number) Buttons
(Eject Button)
(Stop Playing)
(Pause/Play)
EQ (equalizer) Button
(Previous/Next Track)
ENTER
(Left/Right/Up/Down
ENTER)
35
05
DVD/VCD/MP4
---Preferences page--
Default Example showing how to set load factory setting:
(Press , or , then press ENTER)
(Press
--Preference P a g e - -
Go to language page Reset to the factory settings
TVType
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
--Preference P a g e - -
TVType
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
Reset

01
11
Before You Start
AM Tuner Section
VCD/CD Player Section
530-1710 (KHz)
(U.S.A.)
VCD Signal System AUTO/PAL/NTSC
General
FM Section
87.5-108(MHz)
(Europe)
87.5-107.9(MHz)
(U.S.A.)
10.7MHz
10dBuV
50dB
30dB 1KHz
40 -12KHzHz
Note:
Due to continuous product improve-
ment, specifications and design are
subject to change without prior notice.
Specifications
Power Requirement 14.4V DC
(11-16V allowable)
Load Impedance
7dB
Bass 100Hz
Treble 10KHz
Tone Controls
Approx.197x178 x 50
mm (d/w/h)
Dimensions
Approx.2.7kgWeight
Tuning Range
IF Range
Usable Sensitivity
(-30dB)
Signal-to-noise Ratio
Stereo Separation
Frequency Response
450KHz
IF Range
32dBuVUsable Sensitivity
(-20dB)
60dB
Signal-to-noise Ratio
55dB(1KHz)Separation
0.3%
Distortion
Max.Power Output 45W x 4
522-1620(KHz)
(Europe/Russia)
Frequency Range
(Optional)
(Optional)
65-74(MHz)
(Russia)
DVD Player Section
DVD Signal System AUTO/PAL/NTSC
60dB
Signal-to-noise Ratio
60dBSeparation
2
Channels
40Hz to 16KHz
Frequency Response
34
05 DVD/VCD/MP4
---Preferences page--
DVD MenuExample showing how to set Disc Menu Language:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go to language page Set the DVD menu langua ge
TVType
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
--Preference Page--
TVType
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
Parental Example showing how to set parental control:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go to language page Set parental control
TVType
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
--Preference Page--
TVType
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
Change PSWExample showing how to set password, and the default pas sword is 8888.
(Press , or , then press ENTER)
(Press
--Preference Page--
Go to language page Change the password
TVType
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
--Preference Page--
TVType
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
Change
2
3
4
5
6
7
8
Off
G
PG
PG 13
PGR
R
NC 17
Adult
English
French
Spanish
Chinese
Japanese
Korean
Russian
Others

Installation
02
12
Wiring Connection
Rear RCA
Front RCA
(Light Grey line with
red & white head)
(Dark Grey line with
red & white head)
Subwoofer (Brown line with
brown head)
2
Red
Yellow
Black
Ignition Key
Battery +
Ground
Rear L
Speaker
Front L
Speaker
Green/Black
Green
White/Black
White
Video Out 1
Violet/Black
Blue
Violet
Grey/Black
Grey
Antenna
Power +
Rear R
Speaker
Front R
Speaker
FILTER
&FUSE
BOX
AUX Audio input (Black line with red
& white head) AUX Video input
(black line with
yellow head)
Antenna
1
2
Output Plug(Male)
3
Output Socket(Female)
Fan Window
1
3
Lamp In (Pink) Reverse Gear (Orange)
Reverse Signal (Brown)
Video Out 2
Reverse VideoInput
(Brown line with
yellow head)
(Grey line with
yellow head)
(Grey line with
yellow head)
33
05
DVD/VCD/MP4
---Preference page---
TV Type Example showing how to set TV type:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go to language page Select the TVsystem
TVType
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
--Preference Page--
TVType
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
PAL
NTSC
Audio Example showing how to set Audio language:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go to language page Set the audio Language
TVType
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
--Preference Page--
TVType
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
Subtitles Example showing how to set subtitle language:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go to language page Set the subtitles Language
TVType
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
--Preference Page--
TVType
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
Auto
English
French
Spanish
Chinese
Japanese
Korean
Russian
Others
English
French
Spanish
Chinese
Japanese
Korean
Russian
Others

02
13
Installation
6
M5x5
7
Install the Unit
Main Parts List
Mounting Sleeve x1 Rear Mounting Bolt x1 Harness Rubber x1 4 Screws Each
Outer Trim Frame x 1 Connecting Wire x1 Steel Bar x 1
Installation Method DIN Front-Mount
8
Key x 2
Bend these claws
outward for a tight fit,
if necessary.
To support the unit
Fire Wall
32
05 DVD/VCD/MP4
--Dual mono/DRC Setup--
Dual MonoExample showing how to set stereo mode:
(Press (Press , or , then press ENTER)
--Dual mono/DRC Setup--
Dual Mono
Dynamic
Dual mono/DRC setup
Dual Mono
Dynamic
Dual Mono Setup
Stereo
L-Mono
R-Mono
Mix-Mono
Dynamic Example showing how to set dynamic range compression:
(Press (Press , or , then press ENTER)
Dual Mono
Dynamic
Dual mono/DRC setup
Dynamic
Deactivate DRC
1 4
1 2
3 4
Dual Mono
--Dual mono/DRC Setup--
--Dual mono/DRC Setup----Dual mono/DRC Setup--

Installation
14
02
Install the Unit
Select a position where the screw holes of
the mounting bracket lied with the car and
the of the main unit
fitted), and at 2
places on each fasten them to
the car.
supp
screw holes become aligned
(are tighten the screws (see
side). And then
4
Note:
Outer Trim Frame Mounting Sleeve
are not used
and
for installation method.
Installation Method
Installation using the screw holes at
sides of the unit.the
5
1
Bracket supplied
to your car
Dashboard
or Console
31
05
DVD/VCD/MP4
--General Setup Page--
Captions Example showing how to set captions on/off:
(Press (Press , or , then press ENTER)
--General Setup Page--
TVshape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Go ToGeneral Setup Page
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Closed Captions
Off
On
Screen Saver Example showing how to set Screen Saver on/off:
(Press (Press , or , then press ENTER)
--General Setup Page--
TVshape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Go ToGeneral Setup Page
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Set the Screen Saver
On
Off

02
15
Installation
Detach the Unit
Detach the front panel at first. For more de-
tails, please refer to detach the front panel.
1.After the front panel was detached, remove
the outer trim frame.
2. Put the keys into the host on both sides
of the unit and hold the keys to the mount
direction, then push the two sides outward,
and pull them out. (As shown) .
30
05 DVD/VCD/MP4
--General Setup Page--
TV DisplayExample showing how to set TV Display mode:
(Press (Press , or , then press ENTER)
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Go ToGeneral Setup Page
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Set the TV shape
Normal/PS4/3
Normal/LB4/3
Wide16:9
Angle Mark Example showing how to set picture mode:
(Press (Press , or , then press ENTER)
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Go ToGeneral Setup Page
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Set the multi-angle display
On
Off
OSD Lang Example showing how to set language mode:
(Press (Press , or , then press ENTER)
--General Setup Page--
TVshape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Go ToGeneral Setup Page
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Set the OSD Language
English

16
Installation
02
Install the Front Panel
Put notch (shown as picture) onto shaft
.And then slightly press into the right side.
B
A
Detach the Front Panel
Press REL button in the upper rightcorner,
and then the front panel will be folded down.
B
A
29
05
DVD/VCD/MP4
Selecting MENU
Selecting Menu: During DVD status,
press MENU to return tothe root
menu, all ofthe chapters willappear
on monitor.You can press or
button to selectyour desired chapter.
4
27 23
Selecting Title: During DVD status,
press TITLE to return thetitle menu,
all of thetitles will appearon monitor.
Youalso can press or button to
select your desiredchapter.
3
1
2
Under DVD menu, touch the screen to select
items.
Note:
*
27 23
27
Press SETUP on remote control or MENU
on the main unit or in the monitor, main
menu and sub-menu will appear on TFT,
pressing [ ][ ][ ][ ] on the remote
control to select your desired items, then
press ENTER.
* The selections are the preferred options that
will be chosen if they are available on a disc.
If the disc that is inserted does not have the
preferred option then the discs own prefer-
ence will be used.
* Regarding SETUP MENU, please refer to
the following pages for more details.
* Some functions varies depending on the types
of models or formats of the disc.
DVD SETUP MENU
Notes:
Press to the pervious one, press SETUP
or press [ ][ ][ ][ ] to move the cursor
on , then press ENTER to exit the
menu setup.
* To touch the screen to select menu, touch it
again to select the item.
If the touch menu options invalid or the disc
does not support touch-TITLE, that is the
same as bottons on the remote control will
display on the screen. Press to left, press
to right, press to up, press to down
and press to ENTER.
*
27
previous

17
the unit
The back of the panel
02
Installation
Clean the connector
If the connector of the unit and the front panel
is dirty, the unit may does not work normally.
To avoid this situation, detach the front panel
and clean it with a cotton swab dipped in
alcohol . Do not use excessive force or the
damaged. connector will be
* For safety, before cleaning the connector, close
the wage machine and remove the key from the
ignition switch. Do not contact your fingers or
any metal device t with the connector.
Note:
28
05 DVD/VCD/MP4
ANGLE 1 ANGLE 2 ANGLE 3......
Changing the viewing angle
(Multi-angle)
With DVDs featuring multi-angle (scenes
shot from multiple angles) recordings, you
can press ANGLE to switch among vie-
wing angles during playback.
Selection options switch as follows:
* This function is operated by using remote
control.
the
* This function only operates with DVDs featu-
ring multi-angle recordings.
* The mark on a DVD's package indic-
ates it features multi-angle scenes.
The number in the mark indicates the
number of angles from which scenes were shot.
* It is invalid to pressing ANGLE during fast
forward/fast reverse or pause.
3
7
Notes:
3
Selecting Channel
During VCD status, repeatedly press
AUDIO button to select the following
channel:
6
Stereo Mono Left
Mono Right
Selecting the corresponding channel to set
the different sound characters.
This function is operated by using the remote
control only.
Note:
*
Program Playing
During VCD mode, press PROG, the
TFT displays the program menu. Press
NUMBER BUTTONS to select the track
Number and then press to move the cursor
to START, press ENTER to start program
playing; move the cursor to EXIT and press
ENTER to exit the program playing. Move
the cursor to and press ENTER to the
previous page; move the cursor to and
press ENTER to the next page.
During this process, press to cancel
the program playing.
13
18
The function is only valid on remote control.
Note:
*
27
* Press CLEAR to clear the mistake input.
22
*
Playing PBC (Menu)
During VCD status, first press TITLE,
PBC playback starts and the menu of entire
disc appears on the monitor, and then you
can select your favorite track by using
Number Buttons. When a track is playing,
you can to return to
if you would like to end the track and
select others. To cancel PBC playing, press
button again.
press MENU the
menu
TITLE
4
23
3
This function is operated by using the remote
control.
Note:
*
PBC playing confirms to version 2.0 of SVCD/
DVD disc only.
3
may not

18
Common Operations
03
Setting the Sound Characteristics
Repeatedly briefly press SEL button to
select the mode in the following
order:
desired
* briefly pressing button and rotating on
the main unit also performs the same function.
Reset the Unit
Operating the unit for the first time or after
replacing the car battery, you must reset
the unit.
Note:
* When ome errors occur on the
also press RESET
it will
sdisplay, you can
button to resume to normal,
and erase the clock setting and some me-
morized functions.
* This function can only be operated by the
main unit.
Release the front panel at first, and then
press RESET button in the panel w
object, (such as a ball
the unit to initial status.
ith
a pointed point pen)
to set
15
14
After selecting the desired mode, you
adjust the current level by pressing
.
can
VOL
buttons
Note:
Press VOL+ button to increase sou-
nd level and press VOL- button to decr-
ease sound level.
the
the
Volume Control
* Rotating on the main unit also performs the
same function.
14
14
Note:
2
2
Turning the Unit On/Off
Briefly press PWR button to turn on the
unit, press it again, the unit is still in
waiting status. Press and hold to turn off.
the
1
* Pressing PWR button on the main unit also
performs the same function.
Note:
14
To Select Source by Menu
Press it to select your desired item.
If you want to navigation, press NAVI; if it
did not enter into, that means the unit does
not include the function.
In any mode, press BACK to return to the
previous mode.
* If the font display in red, that means this
function is null.
Note:
TREBL
BALAN
BASS
VOL FAD
SUBWO
* During CD/MP3 mode, pressing SEL/-/+ to
performs the same function.
In any mode(except for DVD, SD, USB
mode), press SRC, BACK/ in the
monitor, the following menu will appear:
2
27
05
DVD/VCD/MP4
During DVD mode, press GOTO button
to set the playing time, when the TFT dis-
play : /chapter/audio/subtitle/angle
/title time/chapter time/repeat/time disp.
Press [ ][ ] to select the options, press
ENTER to set the status. Then press NU-
MBER BUTTONS or [ ][ ] to set
the current status.
title
2
27
27
During VCD mode, press GOTO button
to set the playing time, when the TFT dis-
play : /disc time/track time/repeat
/time disp. Press [ ][ ] to select the
options, press ENTER to set the status.
Then press NUMBER BUTTONS or
[ ][ ] to set the current status.
track
2
23
Setting the Playback Time
During MP4 playback, first press GOTO,
and monitor shows : ---, press your desired
track by using number buttons and press EN-
TER to set the status. Second press GOTO
button, and the monitor shows: -:--:--, input
your desired time, then press ENTER.
2
* This function is operated by using remote
control.
the
Note:
Changing audio language
(Multi-audio)
DVDs can provide audio playback with
different language. With DVDs featuring
multi-audio recordings, you can press
AUDIO to switch between language and
audio systems during playback.
AUDIO 1 AUDIO 2 AUDIO 3......
Selection options switch as follows:
* This function is operated by using remote
control.
the
* This function only operates with DVDs fea-
turing multi-audio recordings.
* The number in the mark on a DVD's
package indicates the number of recorded
languages/audio systems.
2
Note:
6
Changing the subtitle language
(Multi-subtitle)
With DVDs featuring multi-subtitle recor-
dings. You can press SUB-T to switch
between subtitle languages during playback.
Subtitles 1 Subtitles 2 Subtitles OFF
Selection options switch as follows:
* This function is operated by using remote
control.
the
* This function only operates with DVDs fea-
turing multi-subtitle recordings.
* The number in the mark on a DVD's
package indicates the number of recorded
subtitle languages.
2
Note:
5
......
During VCD status, press OSD button the
display shows:
Single elapsed
Total
elapsed
Total
remain
Single remain
Display off
Note:
Display off
* This function is operated by using the remote
control.
Single
elapsed
Single
remain
During MP4 status, press OSD button the
display shows:
* Press CLEAR to clear the mistake input.
22
Radio
USB
SD
BACK
want to use/acc es s/enter

1919
03
Common Operations
Mode Selector
* Briefly pressing SRC on the main unit also
performs the same function.
Note:
Repeatedly press SOURCE button to
select the different modes available.
1
Receptor on the main unit for the card
remote control.
Infrared Sensor:
6
Press button to shut off sound
output. And appears on the LCD.
Press it again to resume to previous volume
level.
the
Mute Function
Pressing MUTE on the main unit also performs
the same function.
12
Note:
*
EQ Setting
Repeatedly pressing button to choose
the following modes turn:
EQ
in
While listening to the popular music, classic
music or rock music, you select the co-
rresponding preset modes to adjust the sou-
nd quality ing EQ button.
can
perfectly by us
3
Note:
26
The default setting is OFF.
26
ROCK
CLASS
POP
OFF
* This function is only valid on remote control.
Turning Loudness On/Off
Press activate loud function.
You can this button to increase the low
quency, which can improve sensi ty for
ears. Pressing it again to quit this function.
LOUD button
press
fre tivi
your
25
Note:
* it is only valid on the remote control.
Eject a Disc
Press button to insert a disc and press
to eject it.
Note:
* Briefly Pressing on the remote control also
performs the same function.
Insert a SD Card
Common SD Card: insert a common SD
card into SD slot and the programs in
the card will be played.
3
26
05
Repeat Playing
During DVD playback, press
ing
RPT on
the remote control to perform replay
function as follows:
* This function is only valid on remote control.
15
Note:
Chapter Title
Off
During VCD/MP4 playback, press RPT
on the remote control to TRACK REPEAT.
Slow motion playback
During DVD mode, press to slow
play. There are speeds as follows:
During VCD/MP4 mode, press to slow
play. There are speeds as follows:
The function is only valid on remote control.
Note:
*
During DVD/VCD/MP4 mode, press
ZOOM to increase the picture in size. There
are sizes as follow, each pressing increases
the size until the maximum size is reached.
Increase the size of picture
9
No Change
The function is only valid on remote control.
Note:
*
2X 3X 4X
To remove the image by pressing button.
*
27
Playing Tracks at Random
During DVD/VCD/MP4 playback,
RDM button on the remote control to play
random under the directory
which you select. P return to
press
any track at
ress it again to
normal playing.
16
* This function is operated by using the remote
control.
Note:
Note:
Press ( or ) on remote control to
perform fast reward or fast forward.
Each pressing will change as follows:
Skip backward/forward/F.F
/F.REW the playback
20
16X2X 4X 8 X
During DVD/VCD mode, press P/N on
remote control to set the TV standard to PAL
or NTSC or AUTO system.
System Switch
NTSC
PAL
A UTO
The function can be operated by selecting the
DVD MENU SETUP.
Note:
*
On Screen Display
During DVD status, press OSD button
the display shows:
8
Title elapsed
Chapter
elapsed
Chapter
remaining
Title remaining
Display off
DVD/VCD/MP4
* Pressing and holding on the main unit
also performs the same function.
/

20
87.50M 106.10M
107.90M
87.50M98.10M
90.10M
FM1 CH:1 87.50MHz
-
+
BAND MENU SRC
AMS
04
Set up Main Menu
When the unit is on, the monitor will display
the menu as follows:
Press and hold SETUP on the remote control
or MENU on the main unit, or press MENU
in the monitor to enter the menu as follows:
This menu includes AUDIO,
SOURCE, SYSTEM, EXIT. Press them in
the monitor to set the desired status.
VIDEO,
Main MenuMain Menu
1.Video Adjust
After selecting VIDEO, the sub menu will
appear as follows:
In this menu you can adjust CONTRAST,
COLOR, TINT, BRIGHT, EXIT.PICTURE,
Picture Adjust
Press PICTURE in this menu, it will appear
as follows:
Press and to adjust the size, then
press SAVE to save the setup, press EXIT
to exit this menu.
Note:
* Adjusting the other options performs the same
operation.
AUDIO
SYSTEM
SOURCE
VIDEO
EXIT
EXIT
PICTU 20
25
05
During DVD/VCD/MP4 playback, press
to switch between play and pause;
During stop mode, press this button to
resume playback mode.
Pause the Playback
17
Note:
* Pressing in the monitor or on the main
unit performs the sam function.
Press one of Number Buttons(0~9)
to select a track, it will be played auto-
matically.
23
*
Number Buttons
Note:
* Press CLEAR to clear the mistake input.
22
Stop the playback
During DVD/VCD playback, first press,
, then press or on the remote
control to replay; press twice to stop
playing completely, then press to return
to the beginning of the current track.
During MP4 playback, press first, then
press to return to the beginning of the
current track.
* Pressing in the monitor perform the same
function.
Note:
During DVD/VCD/MP4 playback, touch
the screen the bottom shows the following
menu:
DVD/VCD/MP4 Setup
Play/pause
Stop
Decrease volume level
Increase volume level
DVD setup menu
Mode selector
DVD/VCD/MP4 Play
Insert a disc into the slot , the unit will
automatically switch on, if a disc is loaded,
press SOURCE to start the playback. If the
unit is in other menu, press DVD to switch
to disc play.
Press SRC on the main unit to switch to DVD
mode. When SD card and USB were inserted
into, press this key again and again to switch
among SD card, USB and disc.
12
Note:
*
Pressing in the monitor perform the same
function.
*
Selecting Tracks Fast
21
Note:
During DVD/MP4 playback, press
to play previous track, press to play
next track.
During VCD playback, first press
to return to the beginning of the current
track, press again within 3 seconds
to play previous track ,press to play
next track .
21
21
21
21
123
456
7 8 9
-- 0X
Press this region and the screen shows the
following menu: number keys appears, touch
the number to select tracks.
Touch the " X" to exit this menu.
Track region
DVD/VCD/MP4
* Pressing SRC on the main unit or press
left/right twice continuously in the monitor
also perform the same function.
4
Note:
* Press right corner repeatedly to play the next
track( shows), press left corner to play the
previous track( shows).
touching
at the