DR ZABER SENTRY User manual
User manual
User Manual
2Foreword
Dear User
Thank You for your interest in Sentry PC case. We hope you will enjoy using our product.
Sentry is a product directed to the tech-sa y customers and as such requires prior knowledge
and understanding of its principles, e en before ordering parts for a computer assembled in it.
Sentry targets ATX (mITX/SFX) and PCI-E compliant components for their attainability, howe er not all
components (especially GPU’s) on the market follow the ATX and PCI-E specifications mechanical
references, making it impossible to fit all of them inside such small form factor chassis.
Please read the following instructions before your first attempt to build inside Sentry. If you are missing
any parts or ha e other issues with the case, please contact us at sentry@zaber.com.pl.
Sentry Team
User Manual
3Safety Warnings
Package contains small elements that are not safe for small
children and pets.
Package contains bags that pose risk of choking for small
children and pets.
Assemble the product and keep the lefto er accessories
away from small children and pets
Assembled de ice including internal computer components
has significant weight reaching 7KG. Ne er position the
de ice where it poses a risk of falling on someone.
In transportation always put the bag with de ice on the
ehicle floor because in e ent of rapid breaking or collision
such hea y rigid object may become a deadly projectile.
Children should not carry this de ice in a backpack.
User Manual
4Package Contents
1 X
2 X
1 X
1 X
1 X
1 X
1 X
4 X
1 X
1 X
4 X
1 X
User Manual
Package Contents
M3x12
4 X
M3x6
4 X
M3x6
18 X
M3x6
20 X
M3x
8 X
M3x4
18 X
A B C
D E F
User Manual
Case disassembly 6
x8
M3x6
A
1
1
2
2
User Manual
Case disassembly 7
User Manual
Case disassembly 8
M3x6
x4
A
Install plugs instead of rubber feet for use with vertical stand
User Manual
Rubber feet installation 9
4 X 4 X
Feet Plug
User Manual
Connect Power SW/LED cables after motherboard installation
Motherboard installation 10
M3x6
x4
B
User Manual
11Power supply preparation
If your sfx-l power supply has a grill sticking outside
the body outline this iolating the sfx form factor
reference, please rotate the grill facing inward.
Make sure that grill logo plate doesn’t touch the fan,
otherwise remo e it or replace with generic grill.
DO NOT OPEN THE POWER SUPPLY BODY!
DOING SO WILL VOID YOUR PSU WARRANTY!
2
1 3
User Manual
Power supply installation 12
2
1
3
Connect modular cables before mounting the power supply
Dedicated screws should be bundled with SFX power supply (M3 or M3.5)
User Manual
Bottom iew
Riser is held tightly by its plastic slot
body rather than screwing the PCB
to the chassis. This way delicate
connection between the slot and the
pcb is safe e en when mounting big
and hea y open air cooled cards.
Screws are used to tighten the grasp
of metal on the riser’s pci slot body
and do not go through the holes in
the pcb but lock its mo ement in
front of it. This way multiple models
of riser may be used regardless of
the screw location.
You may need to apply some
pressure on the bottom part of riser
holding slot to achei e clearance
required to slide the riser in.
Riser mount method 13
Exploaded iew
SCREWS ARE NOT SUPPOSED TO GO THROUGH
HOLES IN THE RISER’S PCB, BUT IN FRONT OF IT
RISER PCB AREA
User Manual
Slide the pci-e riser into prepared slot in the central wall
2
1
3
3
PCI-E Riser installation 14
M3x12
x2
C
User Manual
Drive support installation 1
M3x6
x2
D
User Manual
2. " Drives installation 16
Plug in and route SATA Cables before installing 2.5" Dri e
Use SATA data cable with flat (non-angled) connectors
M3x6
x3
B
Secondary drive slot is available for use with 100mm SFX
User Manual
2. " Drives installation 17
M3x6
x3
B
User Manual
2. " Drives installation 18
Single 2.5" dri e may be installed under reference
blower cooler styled GPU
Use SATA cables with flat (non-angled) connectors
M3x
x4
E
Running high-end, open-air cooler style graphics card
may e pose stacked hard disk drives to e cessive heat
2.5" can be stacked with quad drive brackets and installed in VGA
compartment for NAS configurations or with short 200mm card
User Manual
2. " Drive Package Assembly 19
M3x4
x16
F
User Manual
2. " Drive Package Installation 20
Use SATA cables with flat (non-angled) connectors
M3x
x4
E
Table of contents
