DRAGONN DN-KW-WP01 User manual

Alkaline Water Pitcher
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://idragonn.com/products/dragonn-alkaline-water-
pitcher-3-5-liters
SKU: DN-KW-WP01
[e-mail] www.idragonn.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
BEFORE USE
Step 1. Remove the filter from the packaging, making sure to also remove the blue
cover from underneath.
Step 2. Fully submerge the filter in water for 12 minutes, then rinse it 2-3 times under
running water. The water from the filter may have a black color until the filter is
completely clean. Repeat if the water from the filter is still black.
Step 3. Clean the pitcher using soap and water. Rinse thoroughly.
SET UP AND WATER FILTRATION
Step 1. Press the filter into place in the water pitcher.
Step 2. Pour water into the pitcher. Wait for all of the water to be filtered.
Step 3. Place the lid on the pitcher.
LCD TIMER DISPLAY
1. The LCD timer display on the lid of the pitcher indicates when the filter must be
replaced.
2. The filter should be replaced aer 60 days or 150L of water.
3. The timer will begin flashing as a reminder to replace the filter.
4. Reset the timer aer replacing the filter.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
If you do not understand these directions, or if you have any doubts about the installation, please call
a qualified technician. Check carefully to make sure there are no defective or damaged parts. Improper
installation may result in product damage. Do not use this product for any purpose that is not explicitly
specified in this manual. We cannot be liable for damage or injury caused by improper use.
WARNING!

3
Step 1. For first use, press and hold the “start” button for 8 seconds.
Step 2. Press and hold the “start” button for 3 seconds (the display will flash 3
times). Release the button, and the LCD will then display the remaining number of
days before the filter must be replaced, as well as the remaining filter life (displayed
in bars). The flashing black dot on the lower right corner indicates that the memory
function is working correctly.
Step 3. The number (No.) of days will decrease by 1 each day until the number
reaches 0 and the displayed bars begin flashing, indicating that the filter must be
replaced.
Step 4. To restart the timer, press and hold the “start” button for 8 seconds or until
the display stops flashing. The timer will then reset and start again.
Step 5. To turn o the timer, press and hold the “start” button for 3 seconds. The
display will flash 3 times and the timer will turn o. To turn the timer back on, press
and hold the “start” button for 3 seconds.
LCD TIMER OPERATION
1. For best filtration, we recommend replacing the filter every 2 months with
regular use.
2. Only use tap water with the filter. Other liquids or heavily contaminated water
may clog the filter.
3. Do not use hot water. Only cold water should be used with the filter.
4. Keep filtered water refrigerated. We recommend using the water at the earliest
opportunity for best flavor and freshness.
5. Only clean the pitcher using soapy warm water and a so cloth. Do not use
strong detergents, which may leave unwanted flavor in the water. Do not clean in a
dishwasher.
NOTES

FOR MORE DRAGONN PRODUCTS, CHECK OUT OUR WEBSITE AT: www.idragonn.com
Love your new Dragonn setup and want to share?
Tag us in your photo! @dragonnbrands
[e-mail] www.idragonn.com 309-278-5303
Chat live with an agent!
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
LAST UPDATED: 03/17/2020