INSTALLATION
- 3 -
OPERATION
OPTIONAL ACCESSORY
Choose the desired location, drill holes by placing the wall mounting bracket as a
template. Using the fixings provided secure the bracket to the wall (Fig.7). Let the
connection cable run through the hole in the mounting brackets and then plug into the
units as shown in Fig. 5.
Adjust the speaker volume using a screwdriver on the back of the master unit (See
Fig.4). Then clip the unit onto the bracket and secure it by fastening the securing screw
at the bottom.
From Master Unit to Station
Press the ‘CALL’ button to send a call buzzer to the Station.
Press ‘ON/OFF’ button, the Green L.E.D. power indicator will come on.
Press the ‘TALK’ button for talking. For listening, release the button.
Switch off by pressing ‘ON/OFF’ button again when not in use.
From Station to Master Unit
Press the ‘CALL’ button to send a call buzzer to the Master Unit.
When a reply is heard and ‘IN USE’ Red L.E.D. light is on, just talk and listen without
pressing the button.
For prolonged continuous use, it is advisable to connect an A.C./D.C. mains adaptor
(not provided) in place of a battery. To use mains adaptor (500mA 9-12V; Centre
Positive Straight Female Type Plug Head, size see Fig.6) as power supply; plug
adaptor’s jack into the socket on the back of the master unit.
Stock No.64093 Part No.YIC1 A.C./D.C. Adaptor
Station Unit Master Unit
Fig.5. Fig.7.
Fig.6.