Draper 34390 User manual

PRESSURE WASHERS
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO
ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL.
STOCK No.34390. PART No.PW2000.
STOCK No.38419. PART No.PW2110.
STOCK No.54435. PART No.PW2121.
STOCK No.52588. PART No.PW2130.
06/99

CONTENTS:
Specification/gua antee........................................................................................................................ 2
Unpacking and checking contents ....................................................................................................... 3
Powe supply ....................................................................................................................................... 4
Safety wa ning/gene al safety inst uctions fo machine tools .............................................................. 5
Additional safety ules fo p essu e washe s ....................................................................................... 6
Know you p essu e washe ................................................................................................................. 7
Assembly .......................................................................................................................................... 8-9
Ope ation (PW2000 and PW2110) ................................................................................................. 10-11
Ope ation (PW2130) ...................................................................................................................... 12-13
Maintenance ...................................................................................................................................... 14
T oubleshooting ................................................................................................................................. 15
Optional accesso ies .......................................................................................................................... 16
PRESSURE WASHERS
■STOCK No.34390. ■PART No.PW2000.
■STOCK No.38419. ■PART No.PW2110.
■STOCK No.54435. ■PART No.PW2121.
■STOCK No.52588. ■PART No.PW2130.
- 1 -
Pa e Nos.
We
D ape Tools Ltd. Hu sley Road, Chandle s Fo d, Eastleigh, Hampshi e. SO53 1YF. England.
Decla e unde ou sole esponsibility that the p oducts:
Part Numbers:- PW2000, PW2110, PW2121 & PW2130.
Stock Numbers: 34390, 38419, 54435 & 52588.
Description:- P essu e Washe s.
To which this decla ation elates is in confo mity with the following di ective(s) 89/392/EEC, 73/23/EEC &
89/336/EEC.
JOHN DRAPER
Managing Di ecto 09/97
DECLARATION OF CONFORMITY

D ape machine tools have been ca efully tested and inspected befo e shipment and a e gua anteed to be
f ee f om defective mate ials and wo kmanship fo a pe iod of 12 months f om the date of pu chase except
whe e tools a e hi ed out when the gua antee pe iod is educed to ninety days f om the date of pu chase.
Should the machine develop any fault, please etu n the complete tool to you nea est autho ized wa anty
epai agent o contact D ape Tools Limited, Chandle 's Fo d, Eastleigh, Hampshi e, SO53 1YF. England.
Telephone: [phone].
If upon inspection it is found that the fault occu ing is due f om defective mate ials o wo kmanship,
epai s will be ca ied out f ee of cha ge. This gua antee does not apply to no mal wea and tea , no does
it cove any damage caused by misuse, ca eless o unsafe handling, alte ations, accident, o epai s
attempted o made by any pe sonnel othe than the autho ized D ape wa anty epai agent.
This gua antee applies in lieu of any othe gua antee exp essed o implied and va iations of its te ms a e
not autho ized.
You D ape gua antee is not effective unless you can p oduce upon equest a dated eceipt o invoice to
ve ify you p oof of pu chase within the 12 month pe iod.
Please note that this gua antee is an additional benefit and does not affect you statuto y ights.
D ape Tools Limited
Whilst eve y effo t has been made to ensu e accu acy of info mation given in this manual is co ect at the
time of going to p int, the D ape Tools policy of continuous imp ovement dete mines the ight to change
specification without notice.
SPECIFICATION
- 2 -
GUARANTEE
The typical sound p essu e level of this tool is 79db(A).
The noise level whilst wo king could exceed 85db(A) - WEAR EAR PROTECTION.
Pa t No...............................................PW2000
Stock No. ..............................................34390
Moto : ..............................1350W-230V/50Hz
Flow Rate: ....................7.5L/min (450L/hou )
Wo king p essu e - pump ....................80 ba
Max. pump p essu e:..........................100 ba
Weight:................................................11.5kg
Pa t No...............................................PW2110
Stock No. ..............................................38419
Moto :..............................1650W – 230V/A.C.
Flow Rate: ....................7.5L/min (450L/hou )
Wo king p essu e - pump ....................85 ba
Max. pump p essu e:..........................110 ba
Weight:..................................................6.3kg
Pa t No...............................................PW2121
Stock No. ..............................................54435
Moto : ..............................2100W-230V/50Hz
Flow Rate: ........................8L/min (480L/hou )
Wo king p essu e - pump ..................130 ba
Max. pump p essu e:..........................150 ba
Weight:................................................18.5kg
Pa t No...............................................PW2130
Stock No. ..............................................52588
Moto : ..............................2100W-230V/50Hz
Flow Rate: ........................8L/min (480L/hou )
Wo king p essu e - pump ..................120 ba
Max. pump p essu e:..........................130 ba
Weight: ..................................................19kg

Ca efully unpack the p essu e washe and all the loose items f om the ca ton. Fig.1. illust ates the
p essu e washe and all the loose items that a e packed in the ca ton.
UNPACKING AND CHECKING CONTENTS
Fig.1.
Now efe ing to Fig.1. ca efully check that all the pa ts a e p esent. Please contact the D ape Powe
Helpline [phone] if you have any enqui ies ie. p oblems with assembly, appa ent
missing/damaged pa ts, help with accesso ies available o technical advice.
- 3 -
PW2000
PW2110
PW2121
PW2130

POWER SUPPLY
CONNECTING YOUR MACHINE TO THE POWER SUPPLY: (230V ONLY)
To eliminate the possibility of an elect ic shock you machine has been fitted with a BS app oved, non
ewi eable moulded plug and cable which inco po ates a fuse, the value of which is indicated on the pin
face of the plug. Should the fuse need to be eplaced an app oved BS1362 fuse must be used of the
same ating, ma ked thus . The fuse cove is detachable, neve use the plug with the cove omitted. If
a eplacement fuse cove is equi ed, ensu e it is of the same colou as that visible on the pin face of the
plug (i.e. ed). Fuse cove s a e available f om you D ape Tools stockist.
If the fitted plug is not suitable, it should be cut off and dest oyed. *The end of the cable should now be
suitably p epa ed and the co ect type of plug fitted. See below.
*WARNING:
A plug with ba e flexible wi es exposed is haza dous if engaged in a live powe socket outlet.
WARNING: THIS APPLIANCE MUST BE EARTHED.
G een and Yellow - Ea th, Blue - Neut al, B own - Live.
NOTE:- Model PW2110 is a double insulated machine, and is fitted with a 2 co e mains cable.
Blue – Neut al, B own – Live.
As these colou s may not co espond with the colou ed ma kings identifying the te minals in you plug,
p oceed as follows.:
The wi e which is colou ed g een and yellow, must be connected to the te minal in the plug which is
ma ked with the lette ‘E’ o by the ea th symbol o colou ed g een o g een and yellow.
The wi e which is colou ed blue must be connected to the te minal which is ma ked with the lette 'N' o
colou ed black o blue.
The wi e which is colou ed b own must be connected to the te minal which is ma ked with the lette 'L' o
colou ed ed o b own.
N.B. Th ee phase machines must be connected by a qualified elect ician.
EXTENSION LEAD CHART:
Extension lead sizes shown assure a volta e drop of not more than 5% at rated load of tool.
3 6 10 13
Extension cable length Wi e Size mm2
7.5m 0.75 0.75 1.0 1.25
15m 0.75 0.75 1.0 1.5
22.5m 0.75 0.75 1.0 1.5
30m 0.75 0.75 1.25 1.5
45m 0.75 1.25 1.5 2.5
Ampe e ating
(on Name plate)
- 4 -

SAFETY WARNING
WARNING
Please ead the following inst uctions ca efully, failu e to do so could lead to se ious pe sonal inju y.
IMPORTANT
D ape Tools Limited ecommends that this machine should not be modified o used fo any application
othe than that fo which it was designed. If you a e unsu e of its elative applications do not hesitate to
contact us in w iting and we will advise you.
GENERAL SAFETY INSTRUCTIONS FOR MACHINE TOOLS
1. KNOW YOUR MACHINE TOOL
Read and unde stand the owne 's manual and labels
affixed to the tool. Lea n its application and limitations as
well as the specific potential haza ds peculia to this tool.
2. KEEP GUARDS IN PLACE
and in wo king o de .
3. REMOVE ADJUSTING KEYS AND WRENCHES
Fo m a habit of checking to see that keys and adjusting
w enches a e emoved f om tool befo e tu ning it on.
4. KEEP WORK AREA CLEAN
Clutte ed a eas and benches invite accidents.
Floo must not be slippe y due to oil o sawdust.
5. AVOID DANGEROUS ENVIRONMENT
Do not use powe tools in damp o wet locations o
expose them to ain. Keep wo k a ea well lit.
P ovide adequate su ounding wo k space.
6. KEEP CHILDREN AWAY
All visito s should be kept a safe distance f om wo k
a ea.
7. MAKE WORKSHOP CHILDPROOF
- with padlocks, maste switches, o by emoving
sta te keys.
8. DO NOT FORCE TOOL
It will do the job bette and safe at the ate fo which it
was designed.
9. USE RIGHT TOOL
Do not fo ce tool o attachment to do a job fo which it
was not designed.
10. WEAR PROPER CLOTHING
Do not wea loose clothing, gloves, neckties o jewelle y
( ings, w istwatches) to catch in moving pa ts. NON SLIP
footwea is ecommended. Wea p otective hai
cove ing to contain long hai . Roll long sleeves above
the elbow.
11. USE SAFETY GOGGLES (Head Protection)
Wea safety goggles (must comply with BS 2092) at all
times. No mal spectacles only have impact esistant
lenses, they a e NOT safety glasses. Also, use face o
dust mask if cutting ope ation is dusty and ea p otecto s
(plugs o muffs) du ing extended pe iods of ope ation.
12. DO NOT OVERREACH
Keep p ope footing and balance at all times.
13. MAINTAIN TOOLS WITH CARE
Keep tools sha p and clean fo best and safest
pe fo mance. Follow inst uctions fo lub icating and
changing accesso ies.
14. DISCONNECT POWER TO THE TOOLS
Befo e se vicing, when changing accesso ies such as
cutte s etc.
15. AVOID ACCIDENTAL STARTING
Make su e switch is in 'OFF' position befo e plugging in
cable to the powe supply.
16. USE RECOMMENDED ACCESSORIES
Consult the owne 's manual fo ecommended
accesso ies. Follow the inst uctions that accompany the
accesso ies. The use of imp ope accesso ies may cause
haza ds.
17. NEVER STAND ON TOOL
Se ious inju y could occu if the tool is tipped o if the
cutting tool is accidentally contacted. Do not sto e
mate ials above o nea the tool such that it is necessa y
to stand on the tool to each them.
18. CHECK DAMAGED PARTS
Befo e fu the use of the tool, a gua d o othe pa t that is
damaged should be ca efully checked to ensu e that it
will ope ate p ope ly and pe fo m its intended function.
Check fo alignment of moving pa ts, b eakage of pa ts,
mounting and any othe conditions that may affect its
ope ation. A gua d o othe pa t that is damaged should
be p ope ly epai ed o eplaced.
19. DIRECTION OF FEED
Feed wo k into a blade o cutte against the di ection of
otation of the blade o cutte only.
20. NEVER LEAVE MACHINE RUNNING UNATTENDED
Tu n powe off. Do not leave machine until it comes to a
complete stop.
- 5 -

ADDITIONAL SAFETY RULES FOR PRESSURE WASHERS
1. The p essu e washe must be continuously un with wate . D y unning may cause se ious damage to
the seals.
2. Do not sto e the p essu e washe in cold places and p otect the machine f om f eezing conditions.
3. Neve leave the p essu e washe switched ‘ON’ fo mo e than 1 minute with the sp ay lance in the ‘OFF’
o closed position. If the unit is left fo longe pe iods the tempe atu e of the wate in the pump unit will
ise and may damage the pump seals.
4. Do not use the p essu e washe in an enclosed a ea whe e ventilation may be est icted, neve cove the
p essu e washe whilst in use.
5. Fo you own safety do not use the p essu e washe du ing a thunde sto m and avoid di ecting the wate
jet at the p essu e washe o powe supply.
6. Neve di ect the wate jet towa ds pe sons o animals. The wate jet is ve y powe ful and could cause a
se ious inju y.
7. When moving the p essu e washe use the handle p ovided. Do not pull the p essu e washe using the
high p essu e lance hose o mains supply cable.
8. When you have finished using the p essu e washe switch the machine ‘OFF’ and disconnect f om the
powe supply. Now discha ge any emaining p essu e in the high p essu e hose by pulling the lance
t igge .
- 6 -

KNOW YOUR PRESSURE WASHER
PW2000
PW2110
PW2130
PW2121
$
%
&
+
+
*
' )
(
%
%
%
&
&
+ *
*
'
'
$
$
)
(
,
*
'
(
(
(
-
+
)
$
%
$ ON/OFF switch
% T anspo t handle/lance suppo t
& High p essu e outlet
' BS App oved non- ewi eable moulded plug & cable
( Wate inlet connecto
) Hose pipe connecto
* Lance
+ High p esu e hose connecto
, P essu e egulato
- P essu e gauge
NOTE: The up ight
position is fo
t anspo tation and
sto age only.
- 7 -

ASSEMBLY
- 8 -
1. Secu e the lance nozzle assembly $Fig.2.
into the handle assembly %by locating the
male connecto &on the lance into the female
connecto 'in the handle and tu ning as
shown in Fig.3.
3. Now f om the loose pa ts supplied with the
p essu e washe locate the hose pipe connecto
) Fig.5. The hose pipe should be fitted to
connecto ) using a suitable female hose
coupling clip (not supplied). See Fig.6.
IMPORTANT - DO NOT LOSE THE RUBBER
SEALING WASHER WHICH IS SUPPLIED WITH
THE CONNECTOR.
2. Now epeat the ope ation and secu e the high
p essu e output hose ( to the handle
assembly %Fig.4.
Fig.2.
Fig.3.
Fig.4.
Fig.5.
Fig.6.
% $
'
&
%
(
)

ASSEMBLY Cont’d
- 9 -
7. Ensu e the safety button *is in the off
position Fig.9.
8. Pull the t igge +on the lance handle
assembly to elease any t apped ai f om the
p essu e washe . See Fig.9.
9. Check that the ON/OFF switch is in the ‘O’
(OFF) position Fig.10.
10.Connect the p essu e washe to the powe
supply.
YOUR PRESSURE WASHER IS NOW READY FOR
USE.
5. Next connect the high p essu e output hose
to the output connecto as shown in Fig.8.
6. Tu n the wate supply ON.
Fig.8.
Fig.9.
Fig.10.
+
*
Fig.7.
4. Ensu ing that the ubbe sealing washe is
co ectly seated inside the hose pipe
connecto , connect the hose pipe to the wate
inlet connecto as shown in Fig.7.
NOTE MAXIMUM WATER TEMPERATURE 50ºC
(120ºF).

OPERATION
- 10 -
PW2000, PW2110 AND PW2121
HIGH PRESSURE CLEANING
The output wate p essu e is p eset and cannot be
adjusted, the maximum p essu e p oduced is 100
ba (fo PW2000), 110 ba (fo PW2110). D ape
Tools ecommends that befo e ca ying out any
cleaning ope ations always test a small
inconspicuous pa t of the a ea to be cleaned to
check that it is suitable.
The sp ay lance nozzle is adjustable and can
p oduce eithe a powe ful fine pencil jet of wate
o a less powe ful fan jet of wate See Figs.11 &
12.
1. To ope ate the machine switch the machine on
See Fig.13.
2. Aim the lance sp ay nozzle in the equi ed
di ection See Fig.14.
3. Pull the t igge on the handle. The wate will
now sp ay f om the lance. Adjust to the type of
sp ay patte n equi ed as desc ibed above. To
stop sp aying elease the t igge .
FITTING AND USING THE DETERGENT
SPRAYING ATTACHMENTS
1. Detach the lance nozzle assembly $ Fig.2 f om
the handle assembly %.
2. F om the loose pa ts supplied with the p essu e
washe locate the dete gent sp aying
attachment - Fig.15.
Fig.14.
Fig.11.
Fig.12.
Fig.13.
Fig.15.
-

OPERATION Cont’d
- 11 -
4. Fill the dete gent bottle with dete gent to the
equi ed level See Fig.17. Follow manufactu e ’s
di ections fo concent ation to be used.
5. Refit the bottle to the sp ay nozzle assembly as
shown in Fig.18.
6. Switch the machine ‘ON’ See Fig.19.
7. Aim the dete gent sp aying attachment in the
equi ed di ection and pull the t igge .
Dete gent will now sp ay f om the attachment
See Fig.20 to stop the sp aying elease the
t igge .
Fig.17.
Fig.18.
Fig.19.
Fig.20.
PW2000, PW2110 AND PW2121 Cont’d
3. Fit the dete gent sp aying attachment to the
handle assembly in the same way as when
fitting the lance assembly See Fig.16.
Fig.16.

OPERATION Cont’d
- 12 -
PW2130
PRESSURE CLEANING
The output wate p essu e is adjustable, and is
cont olled by knob 0Fig.21. Tu n the knob
clockwise to inc ease the p essu e, anti-clockwise
to dec ease.
The output p essu e is indicated on the gauge 1
Fig.22. D ape Tools ecommends that befo e
ca ying out any cleaning ope ations always test a
small inconspicuous pa t of the a ea to be cleaned
to check that it is suitable.
The sp ay lance nozzle is adjustable and can
eithe p oduce a powe ful pencil jet of wate o a
less powe ful fan jet of wate See Fig.23 & 24.
This is done by otating the head.
1. To ope ate the machine switch the machine on
See Fig.25.
IMPORTANT NOTE: When wo king the machine
should be in the ho izontal position, the up ight
position is fo t anspo tation and sto age only.
Fig.21.
Fig.24.
Fig.22.
Fig.23.
Fig.25.
0
1

OPERATION Cont’d
- 13 -
DETERGENT SPRAYING
1. Remove the fille cap f om the ese voi tank.
See Fig.27.
2. Fill the ese voi with co ectly diluted
dete gent to the equi ed level See Fig.28 and
efit the fille cap.
3. Switch the machine ‘ON’ See Fig.29.
4. To enable the dete gent to flow f om the
ese voi tank, pull the nozzle 3 fo wa d
Fig.30.
5. Aim the lance in the equi ed di ection and pull
the t igge . Dete gent will be syphoned f om
the ese voi tank, mixed with wate and
sp ayed f om the lance. To stop sp aying
elease the t igge to etu n to standa d
p essu e washing mode, etu n the nozzle to the
o iginal position.
Fig.27.
Fig.30.
Fig.29.
3
PW2130 Cont’d
2. Aim the lance sp ay nozzle in the equi ed
di ection See Fig.26.
3. Pull the t igge on the handle. The wate will
now sp ay f om the lance. Adjust to the equi ed
sp ay patte n as shown in Fig. 23 and 24.
To stop sp aying elease the t igge .
Fig.26.
Fig.28.

MAINTENANCE
- 14 -
WARNING - FOR YOUR OWN SAFETY, TURN
SWITCH OFF AND REMOVE THE PLUG FROM
THE POWER SUPPLY OUTLET BEFORE
MAINTAINING YOUR PRESSURE WASHER.
Lubrication - You p essu e washe is supplied
as a sealed unit and does not equi e fu the
lub ication.
(Oil type - 15W40 NON-SYNTHETIC).
Water Filter - Pe iodically check and clean the
wate inlet filte 2 Fig.31 to avoid it becoming
blocked.
Lon Stora e - Befo e a long pe iod of sto age,
always ensu e the machine and hose a e
completely empty of all fluids. Also clean the
wate filte 2 Fig. 31. Failu e to do so may
invalidate wa anty.
If the p essu e washe has been sto ed ove a
long pe iod of time, the e is a possibility of
calcium build up. This may make instant sta ting
difficult.
To help ectify this p oblem tu n the elect ic
pump unit using a sc ewd ive as shown in Fig.32
this will p event the pump unit f om d awing
excess powe .
The pump may also leak when sta ted, this will be
due to ha dened seals. Once the pump wa ms up
the seals will soften and ectify this.
Motor - The elect ic moto is fitted with a the mal
ove load safety switch. The moto will stop if it
ove heats. Wait 5-10 minutes befo e sta ting the
pump again and identify the cause of the
p oblem.
Important Note: The up ight position is fo
t anspo tation and sto age only.
Fig.31.
Fig.32.
2

TROUBLESHOOTING
- 15 -
Trouble Probable Cause Remedy
No powe Pump is stuck Tu n the moto manually (see page 15).
The mal ove load has t ipped Switch OFF and let the machine cool
Faulty powe cable This should be eplaced immediately by a
qualified pe son
Powe supply fuse blown Replace fuse
Pump is not p oducing Wate inlet filte blocked ai leaks Clean the filte
full powe at connections o hoses Check that all the connections a e locking and
a e tight.
Check the wate inlet hose pipe is not leaking.
Suction/delive y valves a e Clea o eplace valves.
clogged o wo n out
Unloade valve is stuck. Loosen and etighten egulation se ve .
Lance nozzle inco ect o wo n out. Check and/o eplace.
Fluctuating p essu e Pump sucking in ai Check that all hoses and connections a e
ai tight
Valves di ty, wo n out o stuck Clean o eplace.
Sealing wo n out. Check and eplace.
Wate leaking f om pump Sealing wo n out. Check and eplace.
The moto stops suddenly The mal safety ove load switch has Switch the unit off and let it cool fo 5-10 mins.
t ipped due to ove heating.
WARNING:
FOR YOUR OWN SAFETY TURN SWITCH OFF AND REMOVE PLUG
FROM POWER SUPPLY.
IMPORTANT:
PLEASE NOTE ALL REPAIRS/ADJUSTMENTS SHOULD BE CARRIED
OUT BY A QUALIFIED PERSON.
POWER DIVISION HELPLINE:
[phone]

OPTIONAL ACCESSORIES
The following accesso ies a e available f om you local D ape Powe Tool Stockist.
- 16 -
*Unit of Sale: 12 bottles. †Unit of Sale: 4 bottles.
Stock Part Description
No. No.
34649 PWW1* Vehicle Wash and
Wax Shampoo 1L
34648 PTFR1* High Foam Traffic
Film Remover 1L
34706 PWW5† Vehicle Wash and
Wax Shampoo 5L
34664 PTFR5† High Foam Traffic
Film Remover 5L
34454 APW7 Detergent Spray
Attachment
34455 APW8 Lance Extension
180mm
34456 APW9 Extended Lance
1500mm
34457 APW10 High Pressure
Extension Hose 6M
34452 APW6
Sandblasting
Attachment Kit
Combination of
powerful water jet &
grit (not supplied)
provides more
effective method of
cleaning.
Accessories for Models PW2000, PW2110, PW2121 and PW2130
Pressure Washers
Unit of Sale: 1 (exceptions shown below table).
34448 APW2
Turbo Lance for
PW2110
Increases cleaning
power of the water
jet up to 2000p.s.i.
34449 APW3 Washing Brush
Fixed (Car)
34450 APW4 Rotary Brush
38279
YPW6002 Replacement Lance
0071
for PW2110 & PW2121
54622
YPW6002 Replacement Lance
0171 PW2130
34451 APW5
Pipe/Drain Cleaner
Ideal for cleaning and
clearing blocked
drains, both indoors
and outdoors.
56252
YPW4018 Replacement Hose
0019 Assembly
57562
YPW4.018. Replacement Hose
0028 with Brass Nipple Fit
57560
YPW6.001. Replacement Trigger
0029 with Brass Nipple Fit

PW2111
PRESSURE WASHER
ACCESSORIES
SUITABLE FOR USE WITH DRAPER MODELS
AND OTHER MANUFACTURER’S SIMILAR MACHINES.
09/2001
PW2210
PW2220
PW3000
PW2121

TROLLEY/WHEEL KIT
■STOCK No. 61225 ■PART No. APW30
FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.61098 PART No.PW2111
- 1 -
The t olley/wheel kit complete with
t anspo t handle makes the machine
mo e manoeuv able than befo e,
whilst still offe ing stability du ing
use.
FITTING INSTRUCTIONS
Refe to manufactu e ’s inst uction
manual.
PW2111

TURBO LANCE
■STOCK No. 57354 ■PART No. APW17
FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.56456 PART No.PW2220
■STOCK No. 57361 ■PART No. APW24
FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.56457 PART No.PW3000
■STOCK No. 65822 ■PART No. APW34
FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.65376 PART No.PW2210
- 2 -
The tu bo lance nozzle fo PW2220, PW3000 and PW2210 models,
inc eases the cleaning powe of the wate jet, the efo e saving time,
wate , ope ato effo t and giving an imp oved cleaning esult.
FITTING INSTRUCTIONS
Remove existing lance and fit the tu bo lance to the t igge assembly,
efe to manufactu e ’s inst uction manual.
PW2210PW2220 PW3000