
- Do not use corrosive or flammable liquids in the
machine.
- The appliance must be connected to a water supply
using a new set of hoses; the old pipe set must not
be reused.
- When using the machine, wear protective
equipment including safety goggles, safety shoes,
safety gloves, safety helmet with visor and
double-insulated hearing protection.
- In order to move the unit easily, bend the lance.
- Make sure the unit is turned off and unplugged
before transporting the unit.
- The connection to the power supply must be made
by a qualified electrician in accordance with
IEC60364-1. It is recommended that the power
supply of this machine includes a residual current
device that interrupts power if the earth leakage
exceeds 30 mA for 30 ms or a device that will
homologate the earth circuit.
- Before assembling, dismantling, repairing,
transporting, servicing and storing, check if the
appliance is disconnected from the power supply.
- Handle the unit with care, do not drop it.
- Do not use the machine in extreme weather
conditions, when it is very cold. Do not use the
machine with ice water.
- Use the tool in a stable and plane location.
- The inlet hose can be connected to the water mains
with a maximum pressure of 10 bars.
-WARNING: In order to avoid any danger due to the
accidental reset of the thermal circuit breaker, this
device must not be powered via an external switch,
06