Draytek VigorPlug 200AV User manual

V
Vi ig go or rP Pl lu ug g 2 20 00 0A
AV V
2 20 00 0M M P Po ow we er rl li in ne e
E
Et th he er rn ne et t A Ad da ap pt te er r
Quick Start Guide V1.0
Introduction
V
Vi ig go or rP Pl lu ug g 2 20 00 0A
AV Vcan be used to bridge any Ethernet device to your powerline
networking with 200Mbps high speed. It is not necessary for you to spend time and
money installing expensive Ethernet cable to share your Internet connection or HD/ SD
video stream at home. Now, with VigorPlug 200AV, no wiring comes true. Just plug
V
Vi ig go or rP Pl lu ug g 2 20 00 0A
AV Vto the power outlet on the wall! You can get stable and fast speed for
data transmission at any site in your house.
Package Content
¾Powerline Ethernet Adpater
¾Quick Start Guide (this paper)
¾CD ROM (includes User’s Guide and Utility)
¾Ethernet cable

Panel Description
LED Description
ACT Means powerline networking activity
LAN Means Ethernet link activity
PWR Means power ready.
Connector Description
Ethernet Where you will connect 10/100M
Ethernet network devices, such as PCs,
printer servers, and anything else you
want to put on your networks.
Secure Please make sure press this button > 10
sec till all LEDs re-flash for each device
to generate a random network password
first. When each device gets the new
random network password, please press
one device's secure button < 3 sec first
and then press another device secure
button < 3 sec. Both devices will auto
group. It will be easy to secure your
home powerline network. All the
operations must be completed within 2
minutes, otherwise time out will be
occurred.
Reset Reset the device to factory default.
Please remove the Ethernet cable from
RJ-45 connector before you press the
button. Please press the button < 3 sec,
the device will reset automatically.

Installation
1. Simply plug into a power outlet and do not use a power strip or UPS with the wall
mount device.
2. Use a twisted-pair cable with RJ-45 plugs at both ends, and plug into Ethernet device
and Ethernet of VigorPlug 200AV.
3. Before install VigorPlug 200AV.Utility, please make sure your windows system
already installed the Microsoft .NET Framework 1.1 or later version.
Note 1: In some cases, it would be better for the user to set 100MBaseTx half
duplex for NB/PC NIC's connection type while connecting to such device. It can
ensure the best performance and keep the stability.

Note 2: Be sure unplug the Ethernet cable before press the Reset button to avoid
damage to your device.
.
Warning
This is a class Aproduct. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Important Safety Instructions
The following pre-cautions should be taken when using this product:
This product is intended for connection to the AC power line.
The following pre-cautions should be taken when using this product:
Please read all instructions before installing and operating this product.
Please follow all warnings and instructions marked on the product.
Do not operate this product near water.
This product should never be place near or over radiator, or heat register.
This product relies on a building's electrical installation for short-circuit (over current) protection.
Ensure that a fuse or circuit breaker is used on the phase conductors (all current-carrying conductors).
Do not allow anything to reset on the product interconnect cords.
Do not locate this product where people may walk on the cords.
The power cord should be plugged directly into a specification AC wall outlet.
Only a qualified technician should service this product. Opening or removing covers may result in
exposure to dangerous voltage points or other risk.
Unplug this product from the wall outlet and refer the product to qualified service personal for the
following conditions:
When the interconnect cords are damaged or frayed.
If liquid has been spilled onto the product.
If the product has been exposed to rain or water.
If the product does not operate normally when the operating instructions have followed.
If the product exhibits a distinct change in performance.