dreo DR-HTF001S User manual

Smart Tower Fan
USER MANUAL
Looking for help?
Contact us to get expert support.
DR-HTF001S
www.dreo.com
[email protected] [phone]
Mon - Fri, 9:00 am-5:00 pm PST/PDT
www.dreo.com

Your support means the world to us. We
hope you enjoy our product as much as
we did creating it.
,,
Thanks For
Choosing
DREO!
EXTEND
YOUR WARRANTY
FOR FREE
FOLLOW US TO
DISCOVER MORE
Visit dreo.com/warranty to extend your warranty for free by
registering your product. If you have any product issues, we
always stand ready to help.
Find us on social media to stay connected and find
new inspiration.
Join the Dreo community on Facebook:
facebook.com/groups/dreohome
@Dreo
[email protected]
Mon - Fri, 9:00 am-5:00 pm PST/PDT
[phone] www.dreo.com

CONTENTS
2
6
1
5
3
4
7
8
9
3-5
13-14
6
15
7-8
16
17
1-2
9-12
ASSEMBLING YOUR
TOWER FAN
CLEANING
AND MAINTENANCE
KNOWING YOUR
TOWER FAN
TROUBLESHOOTING
USING YOUR
TOWER FAN
DREO CUSTOMER
CARE
FCC STATEMENT
IMPORTANT SAFETY
INSTRUCTIONS
CONNECTING TO YOUR
TOWER FAN

12
Dreo Tower Fan Dreo Tower Fan
IMPORTANT SAFETY
INSTRUCTIONS
FOR HOUSEHOLD USE ONLY READ
AND SAVE THESE INSTRUCTIONS
1
READ ALL CAUTIONARY
MARKINGS ON THE APPLIANCE
AND SAFETY INSTRUCTIONS
IN THE USER MANUAL BEFORE
USE.
Do not cover the
air inlet and outlet
while in operation.
Do not use the fan
near flammables
and combustibles.
Children shall not play with the appliance. Cleaning and maintenance shall
not be performed by children without supervision.
Use the appliance as described in the user manual only. Any other use
not recommended in the user manual may cause fire, electrical shock, or
personal injury.
This appliance can be used by children aged above 8 years and persons
with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction
concerning use of this appliance in a safe way and understand the
hazards involved.
Make sure that the voltage of your electricity supply is the same as that
indicated on the appliance.
Always unplug before cleaning or leaving the appliance unused for a long
period of time. Keep your hands dry when plugging/unplugging.
Do not operate any fan with a damaged cord or plug. Discard fan or return
to an authorized service facility for examination and/or repair.
Do not run cord under carpeting. Do not cover cord with throw rugs,
runners, or similar coverings. Do not route cord under furniture or
appliances. Arrange cord away from traffic area and where it will not be
tripped over.
WARNING: To reduce the risk of fire or electric shock, do not use this Fan
cooler with any solid-state speed control device.
This appliance employs overload protection (fuse). A blown fuse indicates
an overload or short-circuit situation. If the fuse blows, unplug the product
from the outlet. Replace the fuse as per the user servicing instructions
and check the appliance. If the replacement fuse blows, a short-circuit
may be present and the appliance should be discarded or returned to an
authorized service facility for examination and/or repair.
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way, If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not attempt to
defeat this safety feature.
Place the appliance on a flat, dry surface before use.
Do not immerse in water and any other liquids.
Do not use the appliance until the base is installed.
Do not insert your fingers, pencil and any other objects into the grilles
while in operation.
Do not dismantle, repair, or modify. All servicing should be performed by
qualified personnel.
General Safety
Electricity Safety
Specifications
Operation Safety
1.
2.
3.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
Model DR-HTF001S
Input AC 120V 60Hz
Rated Power 50W
Battery Type CR2025 3V
Check the appliance regularly
and refer to TROUBLESHOOTING
or contact our customer support
if it shows any of the following
signs:
- Power cord or plug is damaged.
- Loud noise, unusual smell or excessive heat.
Gentle Reminder:

34
Dreo Tower Fan Dreo Tower Fan
ASSEMBLING
YOUR TOWER FAN 2
Assembly Instructions
When using the appliance for the first time, remove the wraps and attach the
parts by following the steps below.
1
2
4
3
Align the holes with the
pegs on the underside
and snap them together.
A. Run the cord through the
center hole.
B. Fit the base onto the fan
by aligning the peg on the
base with the wide cutout
on the fan.
Align four screws with
the holes and drive them
clockwise until tight.
Thread the cord through
the REAR cord keepers
before putting the fan
upright.
CAUTION
- Do not operate the tower fan if the base has not been installed.
- Make sure to thread the cord through all rear cord keepers.
A
B
c
l
o
c
k
w
i
s
e
A
B

56
Dreo Tower Fan Dreo Tower Fan
Package Contents
Front
Rear
LED Display
Control
Panel
Air Outlet
Power & Plug
Carry
Handle
Air Inlet
User
Manual
Remote Control
(battery included)
Thumb Screw x4
Quick Start
Guide
Front Base Half Rear Base Half
CONNECTING TO
YOUR TOWER FAN 3
Before connecting the appliance to your mobile
device, please go to the app store and search for
“Dreo”, then select and download the app. Ensure
your mobile device is connected to a 2.4GHz
network and Bluetooth enabled.
You can use the Dreo app to connect your smart tower fan to
Amazon Alexa or Google Assistant. Actual steps may vary
due to app updates. Please follow the in-app instructions to
set up your voice assistant.
NOTE: You must create a Dreo account to access voice
assistants.
Launch Dreo and sign in or create account by following in-app
instructions.
Press and hold the Oscillation Button on your appliance to start
network settings and device pairing.
(TIP: The icon will keep flashing when pairing.)
(TIP: The icon will keep flashing when pairing.)
(TIP: To reset WiFi network settings, hold the Power Button for
10 seconds, OR remove appliance from the app.)
Select your WiFi, enter password and tap Next to save the network.
You're now ready to control the appliance on your app. Let’s start by
giving your appliance a new name!
Select the Dreo appliance you want to link.
Once you're logged in, tap Add Device on the app.
(TIP: Remember to plug in and turn on the appliance.)
1
4
5
6
3
2

78
Dreo Tower Fan Dreo Tower Fan
LED Display
Mute function is available on the remote control only.
NOTE:
Normal Mode Temperature
Mute
Timer
Natural Mode
AUTO Mode
Fan Speed/ Timer Hour
Sleep Mode
Fan Speed
WiFi Connection
KNOWING YOUR
TOWER FAN 4
Control Panel
Mode Button
Switch between Normal/Natural/Sleep/Auto
Power Button
Turn power on/off
Fan Speed Button
Oscillation Button
Adjust airflow volume (1-6 levels)
Adjust airflow direction / Long press 5s to
connect to WiFi network
Timer Button
Select time to turn off (0-12h)

910
Dreo Tower Fan Dreo Tower Fan
Additional Features
When the fan is ON press the timer button repeatedly
to set a timer (1-12h). When the timer ends, the fan will
stop running automatically. To cancel, set the timer to 0
hour.
Note: Display will return to fan speed/temperature after 10 seconds.
Mute (remote control only)
Speed/Temp Switch (long press)
Firmware Update
Memory
Display Auto Off
Timer
The display shows the fan speed by default. Long press
the mode button to switch speed to temperature.
Check the firmware version on the Dreo app and
update regularly for the fan to work more efficiently.
If the fan stays connected to the electrical outlet after
turning OFF, the fan will operate under the previous
settings when turned ON again.
- Display turns off after 1 minute (after 5 seconds in
sleep mode).
- Wake up the display with any button.
- To disable this feature, please go to the Dreo app.
Display will show “UP” during the update process. Do
not operate until the update is completed.
Press to turn on/off the button sounds.
USING YOUR
TOWER FAN 5
General Operations
Working Modes
Sleep Mode
(Mute Auto On)
Fan speed decreases every
30 minutes.
Speed decreases by two
levels at most and will remain
constant if at level 1:
For level 4: 4 → 3 → 2
For level 3: 3 → 2 → 1
For level 2: 2 → 1
For level 1: 1
Press to turn on, and
to choose a working mode.
Press to adjust the
airflow volume.
Press to change the
airflow direction.
Normal Mode
Fan runs at the constant speed.
Natural Mode
Fan runs at alternating speeds.
Auto Mode
Fan speed adapts to the
ambient temperature.
Press to turn off the
tower fan.
Press to set a timer.
4
1
2
3
4
4

11 12
Dreo Tower Fan Dreo Tower Fan
Battery Replacement
This product contains a lithium button/coin cell battery. If a new or
used lithium button/coin cell battery is swallowed or enters the body,
it can cause severe internal burns and can lead to death in as little
as 2 hours. Always completely secure the battery compartment. If
the battery compartment does not close securely, stop using the
product, remove the battery, and keep it away from children. If you
think batteries might have been swallowed or placed inside any part
of the body, seek immediate medical attention.
The cells must be disposed of properly, including keeping them
away from children. Even used cells may cause injury.
Chemical Burn Hazard. Keep batteries away
from children.
WARNING
Note: If the indicator on the remote
control doesn’t turn on any more,
please consider replacing the
battery.
1
2
CR2025 3V
1
2
33
Press the locking button to pop
out the battery holder.
Replace with the same battery
type with the (+) side facing up.
Push in the holder until securely
locked into place.
Remote Control
Getting the Most out
of Your Tower Fan
Power
Power Indicator
Increase Fan Speed
Decrease Fan Speed
Mute
Mode
Timer
Oscillation
1. Remove any tall obstacles that
might block the airflow from the fan.
2. Combine with your AC unit to get
cooler air throughout the room.
3. Position the tower fan closer to
you to get more direct airflow.
4. Place a bucket of ice in front of
the fan for an extra cooling boost.

13 14
Dreo Tower Fan Dreo Tower Fan
Always unplug the fan before any cleaning or maintenance
to avoid the risk of fire, electric shock, or injury to persons.
Do not immerse in water or get water inside the motor
housing.
Do not use any chemical agents when cleaning the fan.
Store in a cool, dry place and cover it to protect from dust.
CAUTION
CLEANING AND
MAINTENANCE 6
Outer Surface
Grilles & Blades
Gently wipe off the dust with a soft,
dry cloth.
Remove the dust using a vacuum or
air duster.
1.
2.
3.
4.
4
3
2
5
1
User Servicing Instructions (Fuse)
This appliance features a fused safety plug that protects against overload or
short-circuit situations. If the fuse blows, please cut off power and follow the
below instructions or consult a qualified electrician.
Grasp plug and remove from the receptacle or other outlet device. Do
not unplug by pulling on cord.
Open fuse cover. Slide open fuse access cover on top of attachment
plug towards blades.
Remove fuse carefully. Push the fuse from the other side to remove
the fuse.
Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
Close fuse cover. Slide closed the fuse access cover on top of
attachment plug.
1
2
3
4
5
Risk of fire. Do not replace attachment plug. Contains a
safety device(fuse) that should not be removed. Discard
product if the attachment plug is damaged.
WARNING
Base
The base can be disassembled in
reverse order of assembly.

15 16
Dreo Tower Fan Dreo Tower Fan
DREO CUSTOMER
CARE 8
Default 12-Month Warranty
Extend Your Warranty
This appliance is covered by Dreo warranty for 12 months from the date of
its original purchase.
We can only provide after-sales service for products that are sold by Dreo
or Dreo authorized retailers and distributors. If you have purchased the
appliance from a different place, please contact your seller for return and
warranty issues.
Accident, misuse, or repairs performed by unauthorized personnel.
Any unit that has been tampered with or used for commercial purposes.
Normal wear and tear of wearable parts.
Use of force, damage caused by external influences.
Damage caused by non-observance of the User Manual, e.g. connection
to an unsuitable mains supply or noncompliance with the instructions.
Partially or completely dismantled appliances.
Defects caused by or resulting from damages from shipping or from
repairs, service, or alteration to the product or any of its parts that have
been perform ed by a repair person not authorized by Dreo.
The warranty will not apply in cases of:
Extend your warranty by registering your new appliance on our website
https://dreo.com/warranty.
1.
2.
3.
4.
5.
6.
7.
If your problem is not listed or still persists, please contact our
Customer Support (see page 16).
Make sure that the cord is connected to a powered outlet and the
mains voltage corresponds with the voltage indicated on the fan.
Check if the fuse has blown. If the fuse has blown, please refer to
page 14.
Place the fan on a flat, level surface.
Incorrect installation might also cause shakiness. Please refer to
the assembly instructions in page 3-4. Note that the power cord
must be run through all three keepers.
Place the fan on a flat, level surface.
Be sure not to insert anything into the air inlet and outlet.
TROUBLESHOOTING 7
My fan won’t turn on!
My fan is shaky and wobbling!
My fan is making vibration and noise!
1.
2.
1.
2.
1.
2.
[email protected][phone]
Mon - Fri, 9:00 am-5:00 pm PST/PDT
www.dreo.com

17 18
Dreo Tower Fan Dreo Tower Fan
www.dreo.com
Shenzhen Hesung Innovation Technology
Co., LTD
C
26F, Bldg A7, Creative City, Shenzhen, China
Intertek
5020677
MADE IN CHINA
Rev_1.1_EN
FCC STATEMENT 9
This device complies with Part 15 of the FCC Rules.
This equipment has been tested and found to comply with the limits for a
Consumer ISM equipment, pursuant to Part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.This equipment generates, uses and can radiate
radio frequency energy and,if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
“Please note that changes or modifications of this product is not expressly
approved by the party responsible for compliance could void the user's
authority to operate the equipment.”
“If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.