drew & jonathan SCOTT LIVING MEYERSON HDSLFP48L-2A User manual

THANK YOU
We appreciate the trust and confidence you have placed in Scott Living by Drew & Jonathan through the purchase of this
electric fireplace/heater. We strive to continually create quality products designed to enhance your home. Visit us online to
see our full line of products available for your home improvement needs.
Thank you for choosing Scott Living by Drew & Jonathan!
Model # HDSLFP48L-2A
# HDSLFP48L-2B
OMSID # 320643165
# 320643188
ASSEMBLY INSTRUCTIONS
MEYERSON 48” INFRARED MEDIA ELECTRIC FIREPLACE
Questions, problems, missing parts? Before returning to the store,
call Customer Service
1-866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
www.whalenfurniture.com
Or e-mail your request to [e-mail]

Table of Contents
Table of Contents ..................................................................... 2
Safety Information .................................................................... 2
Maximum Recommended Weight Loads ........................ 2
Warranty ..................................................................................... 2
Pre-Assembly ............................................................................ 2
Planning Assembly ................................................................ 2
Tools required ......................................................................... 2
Hardware Included ................................................................. 3
Package Contents .................................................................. 4
Assembly .................................................................................... 5
Care and Maintenance .......................................................... 22
Caring for Wood Furniture................................................. 22
Cleaning the Fireplace Trim .............................................. 22
Safety Information
Please read and understand these instructions before
assembling and using this console. Save these instructions
for future reference.
MAXIMUM RECOMMENDED WEIGHT
LOADS
WARNING: This unit is not intended for use with CRT TVs.
Use only with flat panel TVs and audio/video equipment
meeting recommended size and weight limits. Never use
with larger/heavier than recommended flat panel TVs or
equipment. To avoid instability, place flat panel TV in the
centre of the unit; the base of the television must be
able to rest on the supporting surface of the unit
without over-hanging the edges. Improperly positioned
flat panel TVs, or flat panel TVs or other equipment that
exceed recommended size and weight limits could fall off
or break the unit, causing possible serious injury.
Warranty
We are confident that you will be delighted with this purchase. Should this product be defective in workmanship or
materials, or fail under normal use, we will repair or replace it for a period of up to one (1) year from date of purchase.
This warranty gives you specific rights and you may also have other rights which vary from state to state.
Contact the Customer Service Team at 1-866-942-5362 or visit www.whalenfurniture.com.
Pre-Assembly
PLANNING ASSEMBLY
Compare all parts with the Hardware Included and Package Contents list. If any part appears missing or damaged, do not
assemble this product and contact the Customer Service Team at 1-866-942-5362.
TOOLS REQUIRED
Phillips
screwdriver
(not provided)

Pre-Assembly (continued)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity Part Description Quantity
AA Insert screw 10+1 extra KK L-shaped bracket 2
BB Pan head screw 8+1 extra LL Handle 2
CC Wood dowel 47+2 extra MM Paper sticker 49+2 extra
DD Cam lock 49+2 extra NN Hinge 4
EE Cam bolt 49+2 extra OO Nickel screw for hinge 24+1 extra
FF Short flat head screw 8+1 extra PP Rubber bumper 4+1 extra
GG Long flat head screw 4+1 extra QQ Glue 2
HH Medium flat head screw 3+1 extra RR Touch-up pen 1
II Washer head screw 32+1 extra SS Tipping restraint hardware kit 2
JJ Shelf support 8+1 extra

Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity Part Description Quantity
A Heater 1 R Lower left side panel 1
B Left upright arm 1 S Lower left partition panel 1
C Right upright arm 1 T Lower right partition panel 1
D Connector strap 1 U Lower right side panel 1
E Ember bed 1 V Left door 1
F Left log 1 W Right door 1
G Right log 1 X Upper side panel 2
H Firebox wall panel 1 Y Upper partition panel 1
I Firebox glass 1 Z Upper side molding 2
J Remote control with battery 1 A1 Upper partition molding 1
K Top panel 1 B1 Middle crossbar 1
L Media shelf 1 C1 Middle trim 2
M Bottom panel 1 D1 Firebox holder 1
N Front skirting 1 E1 Lower back panel 2
O Rear skirting 1 F1 Upper back panel 1
P Left skirting 1 G1 Adjustable shelf 2
Q Right skirting 1
K
L
M
N
O
PQ
RSTU
XY
C1 D1
A
B
D
E
F
G
H
I
J
C
W
ZA1 B1
G1
F1
E1
V

Assembly
1 Preparing base assembly
NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all
bolts. This will make the assembly easier.
□ Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted
floor or the empty carton to avoid any scratches.
□ Securely screw the cam bolts (EE) into the designated small holes on the bottom panel (M) and skirtings (N, P and Q)
using a Phillips screwdriver.
2 Gluing wood dowels
□ Glue the wood dowels (CC) into the designated holes on the skirtings (N, O, P and Q). It is very important to use a
small amount of glue on both ends of dowels and wipe away the excess glue immediately.
NOTE: Refer to the dowel guide drawings in this step for further clarification on how to properly glue in the
wooden dowels. Apply this method whenever instructed to install wood dowels.
GLUE
XX
FINAL
1 2 43
The dowel assembling guide
M
NP
Q
EE
N
PQ
CC CC
CC
O

Assembly (continued)
3 Attaching rear skirting
□ Attach the rear skirting (O) between the side skirtings (P and Q) by engaging two cam locks (DD).
NOTE: Refer to the cam lock assembling guide drawings in this step for further clarification on how to properly
install cam locks. Apply this method whenever instructed to install cam locks.
4 Attaching front skirting
□ Align and attach the front skirting (N) to both side skirtings (P and Q) using two cam locks (DD).
DD
O
P
Q
DD
The cam locks face
inward.
The cam lock assembling guide
N
Q
P
DD
DD

Assembly (continued)
5
Attaching base
□ Using the wood dowels (CC) as guide, align and attach the previous assembly to the bottom panel (M) by engaging
11 cam locks (DD).
6 Preparing media shelf and bottom panel assembly
□ Securely screw the cam bolts (EE) into the designated small holes on the media shelf (L), bottom panel (M) and
middle trims (C1) using a Phillips screwdriver.
ML
C1
C1
EE
M
Q
O
N
P
M
P/Q
DD

Assembly (continued)
7 Gluing wood dowels
□ Glue the wood dowels (CC) into the inner holes on the lower side panels (R and U), lower partition panels (S and T)
and middle crossbar (B1) as shown.
8 Attaching middle trims
□ Attach the middle trims (C1) to the lower partition panels (S and T) with four cam locks (DD) .
S
C1
DD
DD
T
C1
DD
DD
RU
ST
B1
CC CC
CC
CC
CC
CC
The outer edges are
flush with each other.
The outer edges are
flush with each other.

Assembly (continued)
9 Attaching middle crossbar
□ Attach the middle crossbar (B1) to the media shelf (L) with three medium flat head screws (HH).
10
Attaching lower partition panels
□ Align and attach the lower partition panels (S and T) to the bottom panel (M) with four long flat head screws (GG).
GG
M
S
T
GG
GG
GG
HH
HH
L
HH
B1
The trims face inward.

Assembly (continued)
11 Attaching lower side panels
□ Orient and attach the lower side panels (R and U) to the bottom panel (M) by engaging four cam locks (DD).
12 Attaching media shelf
□ Ask for assistance to position the media shelf (L) onto the lower vertical panels properly and fasten it into place by
engaging 8 cam locks (DD).
R
U
S
T
L
DD R/S/T/U
L
DD
M
R/U
M
R
U
The hinge mounting holes
face inward and are located
at front side.
The
crossbar
faces
upward.

Assembly (continued)
13
Preparing top section assembly
□ Ask for assistance to lift the assembly unit upright.
□ Securely screw the cam bolts (EE) into the designated small holes on the top panel (K), media shelf (L), upper side
moldings (Z) and upper partition molding (A1) using a Phillips screwdriver.
14
Gluing wood dowels
□ Glue the wood dowels (CC) into the designated holes on the upper side panels (X) and upper partition panel (Y) as
shown.
L
K
ZZA1
EE
R
XY
CC
CC
X
CC CC

Assembly (continued)
15 Attaching upper moldings
□ Attach one upper side molding (Z) to one upper side panel (X) by engaing two cam locks (DD).
□ Complete this step two times to assemble the other upper side panel (X) and molding (Z) together.
□ Repeat the same process to combine the upper partition molding (A1) with upper partition panel (Y).
16 Attaching upper side panels and partition panel
□ Align and attach the upper side panels (X) and upper partition panel (Y) to the media shelf (L) by engaging six cam
locks (DD).
A1
DD Y
X
Z
DD
x
2
X
X
Y
L
U
DD
L
X/Y
The outer edges are
flush with each other.
The moldings face inward
and are located at front side
.

Assembly (continued)
17
Attaching top panel
□ Ask for assistance to place the top panel (K) onto the upper vertical panels properly and fasten it in place with six
cam locks (DD).
18 Attaching back panels
□ Now, go back and securely tighten all the cam locks and screws. Make sure all the parts are tight and there are no
gaps between the parts. This will help keep the unit square
□ Ask for assistance to lay down the unit at its front edges as shown.
□ Pick up the upper back panel (F1) and align the pre drilled holes against the upper long edge with the pilot holes on
the back of the top panel (K). Attach it in place using the provided washer head screws (II).
□ Using the pilot holes as a guide, align and attach the lower back panels (E1) to the mantel with the provided washer head
screws (II).
NOTE: We recommend attaching back panel with the screws at the corners first.
U
E1
F1 E1
II
K
U
X
X
Y
DD
X/Y
K
The ventilation holes are
located at the bottom.

Assembly (continued)
19
Installing door hinges
□ Extend two door hinges (NN) and rest the hinge cups onto the cutouts of left door (V). Secure the door hinges
(NN) in place by using two nickel screws (OO).
□ Repeat the same process to install two hinges (NN) onto the right door (W).
20
Attaching door panels
□ Ask for assistance to lift the assembly unit upright and position it near the final location.
□ Using the pilot holes as a guide, pick up the left door (V) and fasten the hinge bases onto the lower left side panel
(R) with eight nickel screws (OO).
□ Repeat the same process with the right door (W).
□ Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws for a
good fit. Refer to the hinge sticker on door for adjustment.
K
R
V
W
NN
OO
U
OO
NN
OO
VW
OO
OO
OO
NN
OO
OO
NN
OO
NN

Assembly (continued)
21 Installing door handles
□ Attach one handle (LL) to the front side of each door (V and W) with four short flat head screws (FF).
22
Attaching adjustable shelves
□ Open the doors and insert four shelf supports (JJ) into the holes at the desired height inside each side
compartment. Make sure you place the four shelf supports at the same level to make the shelf level.
□ Tilt and rest the adjustable shelves (G1) onto the shelf supports.
K
R
U
FF LL
V/W
V
W
K
R
G1
G1
JJ
G1
JJ

Assembly (continued)
23
Putting paper stickers and stick bumpers
□ Put the paper stickers (MM) onto the cam locks to conceal the cams.
□ Stick the rubber bumpers (PP) on the outer corners of doors where the lower partition panels (S and T) are in
contact with.
24
Attaching upright arms
□ See figure A: Fasten upper 2 screws (AA) through the upright arm (C) into the heater (A) until tight.
□ See figure B: Fasten lower 2 screws (AA) into the upright arm (C) until tight.
□ Fully tighten all 4 screws (AA) one final time.
□ Repeat the same process with upright arm (B).
WARNING: Do not lift or transport the heater by using the upright arms.
IMPORTANT NOTE: Use hand screwdriver, not power driver to assemble fireplace insert. See BILT for video
instructions.
A
C
B
C
AA
A
AA
C
A
AA
MM
V
W
PP
PP
K

Assembly (continued)
25
Attaching logs to ember bed
Install left log (F) into left hole of ember bed (E) by inserting front edge of base of the log into front notches of
ember bed hole.
Then tilt the log back to insert the rear edge of the log base into rear notches of ember bed hole (press down log
firmly to lock into position).
□ Repeat the above process for the right log (G).
IMPORTANT: Carefully follow the 2 steps below for inserting each log.
26
Positioning ember bed
□ Set the ember bed (E) onto the heater (A) as shown.
□ Push ember bed forward against the front flange of heater.
□ Position the USB cable as shown below.
A
E
E
A
USB cable
G
EE
12
E

Assembly (continued)
27
Attaching wall panel
□ Fold the wall panel (H) as shown. Then position yourself at back side of heater (A).
□ Hold wall panel (H) at the angle shown below and insert lower back edge into metal slots on back of heater (A).
□ Tilt wall panel (H) forward until bottom corner inserts into lower U-channels on both upright arms (B and C).
□ Continue to tilt wall panel (H) forward until the top corner inserts into upper U-channels on both upright arms (B and
C).
28
Connecting ember bed cable to heater
□ Fully plug the USB connector of the ember bed (E) into the back port of heater (A).
C
B
H
H
A
U
-
channels
E
A
A

Assembly (continued)
29
Inserting the glass
□ Slide the glass (I) into the inner U-channels on both upright arms (B and C) until the glass sits onto the heater (A). If
needed, push top of upright arms in or out to accommodate glass. Make sure the top of the glass (I) is flush with
the top of both upright arms (B and C).
30
Positioning connector strap
□ Position top connector strap (D) over the glass (I) and upright arms (B and C). Follow orientation shown below.
The warning labels on glass
should face outward.
The bevel edge faces inside the unit.
A
I
I
B
C
D
I
H
C
B
D
H

Assembly (continued)
31
Attaching connector strap
□ Fasten connector strap (D) to both upright arms (B and C) using two screws (AA) as show below. Holes must be in
line for screw to pass through.
32
Finishing fireplace insert assembly
□ The firebox is now ready for the next assemble step.
D
AA H
D
H
C
B