Drija PRISMA TOUCH 76 User manual

User Manual
PRISMA TOUCH 76
Voltage 110V-120V

User Manual
RANGE HOOD | PRISMA TOUCH 76
2
1. FOR YOUR SECURITY ................................................................................3
2. EXTRACTOR DESIGN..................................................................................3
3. WHEN CLEANING THE EXTRACTOR.........................................................6
4. CHANGING THE BULBS ..............................................................................7
5. INSTALATION...............................................................................................8
6. CIRCUIT DIAGRAM.................................................................................... 10
7. TECHNICAL DATA......................................................................................11

User Manual
RANGE HOOD | PRISMA TOUCH 76
3
1. FOR YOUR SECURITY
•Never ignite the gas or flame burners under the extractor without first
placing a pan on them (the flame tends to rise and will damage the
appliance).
•If you cook for a prolonged period using the extractor, it must be constantly
monitored.
•Repairs should only be carried out by suitable personnel.
•Clean the filter cartridge regularly (once a month).
•The extractor is not allowed to be used on a solid fuel stove (wood, coal,
etc.).
•These extractors have been designed for private use in the home for
constant product improvements. We reserve the right to make changes in its
technical, functional or aesthetic characteristics as results of technical
developments. These kitchen extractors were designed exclusively for the
cooking of beverages and food products. These products do not contain in
their parts asbestos-based material.
2. EXTRACTOR DESIGN

User Manual
RANGE HOOD | PRISMA TOUCH 76
4
IMPORTANT: If multiple speeds are selected at the same time, the unit will opt for
the highest speed. The extractor will stop if no button is pressed.
Soft touch control (See figure).
1. When connected to the power, the clock will show 12:00 (24h), and the kitchen
extractor goes to standby mode.
2. When the "lighting" button is pressed, it will turn on the right and left lights,
pressing it again both lights will turn off. (Note: The lighting button is independent,
and is not subject to the control of any other button, except the one of the power
supply).
3. "Intensity" button has 3 positions: Fast, Medium, and Slow.
•Turn on, turn off. Press the power button; it will turn on with the digital
display. Press the slow button (the display will show the letter "L"), the light
and motor will start to work slowly. Then press the slow button and both the
light and digital display will turn off, the motor cancels all previously given
instructions.
•On the slow basis press the "Medium" button, the LCD shows "M", which is
the medium intensity motor?
•On the medium basis press the "Fast" button, the LCD shows "H", which is
the motor of the Fast intensity?
•The extractor can be changed from one intensity to the other while it is in
operation.
4. Use the "Clock" button.

User Manual
RANGE HOOD | PRISMA TOUCH 76
5
•When the engine is running in the intensive mode, press the clock button
and will appear on the clock log screen for a countdown back from 03:00
minutes.
5. Use the "24h" clock.
•The watch is set by the manufacturer to "12:00". When the extractor is
disconnected from the current the clock automatically returns to 12:00, so it
must be re-programmed by the consumer.
•When the extractor is in standby mode (Note: it is not necessary to press
the power supply button) pressing the "Clock" button will turn on the clock
indicator and "12:00" will flash on the display.
(Note: For minutes, the highest number is 59;
Larger numbers are invalid). Press "Clock" button to recognize it. When the
backlight and the indicator light go off, the hours and minutes have already been
set.
LOW SPEED:
•For simmering that does not produce much steam
•Ventilate the kitchen.
AVERAGE SPEED:
•For standard meals.
HIGH SPEED:
•When large amounts of steam and smoke will occur (prolonged frying and
cooking under pressure).
•Always return to medium speed as soon as possible.
FOR THE MAXIMUM EFFICIENCY OF YOUR EXTRACTOR:
•Use the back cooking zones on your stove of preference.
•We suggest turning on the extractor as soon as you start cooking and let it
run a few more minutes as soon as you finish cooking if necessary.
Note:

User Manual
RANGE HOOD | PRISMA TOUCH 76
6
Change the air in the room and ventilate as much as possible.
Keep in mind that: The volume of air in a kitchen changes per minute at high
speed.
IMPORTANT: Do not use the extractor without the aluminum filter.
3. WHEN CLEANING THE EXTRACTOR
1. REGULAR CLEANING
•Never use metal sponges, abrasives or brushes that are too hard. For body
cleaning and light cover, use a commercial cleaning product that is diluted in
water, then rinse in clean water and dry with gentle cleansing.
2. MONTHLY CLEANING:
FILTER CARTRIDGE
•Clean the filter every month to prevent fire hazard. The filter collects grease
and dirt as it is an element that plays an important role in the efficiency of
the extractor. It can be flammable if saturated with grease residues. Clean
with commercially-available home product, rinse properly and dry. Cleaning
can be done in your dishwasher by placing the filter in up position (do not
allow it to come into contact with dirty dishes or pots).
Before using the filter cartridge for the first time, remove the protective plastic.
-TO REMOVE THE FILTER CARTRIDGE.
1. Push back with one hand.
2. Press the filter down and pull out.
After cleaning, replace the filter and proceed in the same way to reinsert the
cartridge.

User Manual
RANGE HOOD | PRISMA TOUCH 76
7
3. ANNUAL CLEANING:
• Activation of the carbon filter.
Only installed extractors are applied as a re-circulation unit (not ventilated outside).
This filter catches the odors and must be changed at least once a year depending
on the use given. Buy these filters from your dealer (with the reference number that
appears on the nameplate inside the extractor) and take control when you change
them.
DANGER:
Disconnect the extractor before servicing:
•Remove the filter.
• Place the new carbon filter into the blower of the extractor inside the
surface, and then put it directly.
• Repeat the same operation for each of the filters.
• Arrange the filter again.
4. CHANGING THE BULBS
Disconnect or shut off the extractor before beginning maintenance.
MODEL USING BULB LIGHTS OR NEON TUBE
• Unscrew the screw securing the light cover.
• Tilt back.
• The type of bulb you use is
2W LED, replace the light bulb and screw the new one
(see diagram)...

User Manual
RANGE HOOD | PRISMA TOUCH 76
8
MODEL WITH LED LIGHTING
• Remove the chrome rims "A" by turning
Contrary to the clock hand.
• Change type GU10-2W-12VScrewing it.
• Reassemble them by performing the operation
in the reverse order.
5. INSTALATION
GENERAL BUSINESS
•If you have an outlet to the outside:
Your extractor can be connected to it by
means of an extraction duct (enamel,
aluminum, flexible pipe or non-flammable
material with an inner diameter of 150 mm)
(supplied with the extractor).
•If you do not have an outlet to the
outside:
All our appliances have the option to operate
in re-circulation (with no outlet to the
outside).
Under these circumstances, add a charcoal filter activator, which will catch odors
(See instructions on page 7).
This filter is available through your dealer under the reference number indicated on
the nameplate. (See inside the extractor)
MOUNTING
•Pre-assembly recommendations:
The extractor must be 70cm from the burners so that it is properly adjusted.
Draw a vertical line on the wall to center the extractor (and fireplace) properly on
the stove.
Make a mark on the vertical line 70 cm above the surface of the burner. This
vertical line at 70cm will help you correctly position the supplied mounting pattern.

User Manual
RANGE HOOD | PRISMA TOUCH 76
9
EXTRACTOR MOUNTING:
MODEL WITH GLASS:
•To install on the wall every 100 mm, drill 3 holes whose diameter is 8 mm in
a suitable place according to the hook of the extractor.
•Insert screw plugs into the holes.
•Fix the hook to the wall, place drill template on the hook. See fig.1
•Add the soot tube to the valve, and place it outdoors. See fig.2.
•Place two chimneys in the extractor. See pic.3A
•Place the glass in the correct direction. Use screws to fix the glass, when
installing the screws please do not tighten tightly to avoid cracking of the
glass. See pic.3B
•Drill 2 holes of 8 mm in a suitable place according to the second plate (see
fig.4A), place two screws in the direction of the plate (see fig.4A), then
remove the internal chimney at a suitable height. Put the inner chimney on
the second plate and tighten the two screws (see pic.4B)
MODEL WITHOUT GLASS:
To install on the wall every 100 mm, drill 3 holes whose diameter is 8 mm in a
suitable place according to the hook of the extractor.
•Insert screw plugs into the holes.
•Fix the hook to the wall, place drill template on the hook. See pic.2
•Add the soot tube to the valve, and place it outdoors. See pic.3
•Calculate the final height of the chimney, put the first plate and two screws
(loosen but do not fix) on the back of the two screws (see pic.4A). Remove

User Manual
RANGE HOOD | PRISMA TOUCH 76
10
the internal chimney at a suitable height and tighten the two screws (see
pic.4B). Fix the entire chimney to the extractor (see pic.4C). Finally, drill 2 8
mm holes in a suitable place according to the second plate. Repeat 3.3. Put
the inner chimney on the second plate and tighten the two screws (see
pic.4A).
ELECTRIC CONNECTION:
This appliance is supplied with a H05V VF power cable with 3 cores of 0.75m2 (2
phases + ground) and must be connected to 110V single-phase mains using a plug
and switch complying with CEI83 standard, which must be easily accessible Once
it is mounted or a bipolar double isolator switch with contact opening of at least 3
mm. This double bipolar isolator will also be required if the outlet is not accessible.
We will not be responsible for accidents resulting from incorrect or non-existent
ground events. Your fuse should be 10 or 16 amps.
6. CIRCUIT DIAGRAM

User Manual
RANGE HOOD | PRISMA TOUCH 76
11
7. TECHNICAL DATA
PROTECTION THE ENVIRONMENT
It can help protect the environment!
Please remember to respect local regulations: Reach electrical
equipment that is no longer working yet suitable disposal center.
Note: The manufacturer reserves the right to make changes to the
specifications and design of the product.
Power Input:
140W
180W
220W
Voltage Range:
110~127V
220~240V
110~127V
220~240V
110~1
27V
Range
Frequency:
50HZ
60 HZ
50HZ
60 HZ
50HZ
Current Rating:
0.8-1.5A
0.8-1.5A
0.8-
1.5A