DT Research ACC-001-29 Assembly instructions
BASIC OPERATION GUIDE
Battery Holster
Instrucons:
Insert the DR202 baery inside the Baery Holster in the correct
direcon and lock the lid. To use as a portable power bank,
connect the cable(s) to the Baery Holster and the DT Research
Tablet and/or the peripheral(s).
Thank you for purchasing the Baery Holster by DT Research.
The Baery Holster (ACC-001-29) is designed to be a charging
case as well as a portable power bank while the fully-charged
DR202 baery (oponal) is stored inside. The package includes
one Baery Holster which features a baery slot with lockable
gate as well as three DC-out connectors, one holder and cables.
CAUTION:
This Baery Holster must only be used with the specic DR202 baery, Tablet models and
peripherals. Failure to do so may result in tablet or charger damage, or personal injury.
Package Contents:
1. Baery Holster with holder
2. Cables
3. Basic operaon guide
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2020, DT Research, Inc. All Rights Reserved.
BOG 060920 ACC BH ENG
I/O Ports
DC-out Connector 1 (2.5mm for 12V), 1 (1.35mm for 15V) and 1 (1.7mm for 19V)
Baery Slot 1 with lid
Mechanical and Environmental
LED Indicator 1
Baery Support 1 DR202 Li-Ion baery; 11.1V, 7800mAH (oponal)
DC-out 12V, 1A; 15V, 1A and 19V, 2.36A
Enclosure Aluminum + ABS plascs
Dimensions (H x W x D) 7.8 x 4 x 1.37 in/ 198 x 102 x 34.8 mm
Weight 2.07 lbs/ 0.94 kg
Regulaon FCC Class B, CE, C-Tick, RCM, MEPS, RoHS compliant
Temperature Operaon: 0°C – 40°C; Storage: -20°C – 60°C
Humidity 0% – 90% non-condensing
* Specicaons subject to change without noce.
Precauons
1. Always exercise care when operang and handling.
2. Do not disassemble any poron of the holster as this will void any product warranty.
3. In the unlikely event that abnormal noise, strange odor, or smoke is present, immediately
disconnect all power sources. Please report the problem to your device provider
immediately.
Specificaons
Baery LED Status
1. When the baery voltage is over 10.5V, the LED indicator is off.
2. Red indicates the baery voltage is lower than 10.5V
Table of contents
