DUKWIN DK01 Series User manual

DK01 SERIES
WATCH WINDER MANUAL

1
Introduction
1. Power
1.1 Optional Plug
2. The back of the watch box
3. Watch Cuff
4. How To Use The Watch Cuff
5. Controls
6. Program Setting
6.1 Winding Program for Manual Control Watch Winder
6.2 Winding Program for LCD Remote Control Watch Winder
7. Contact
2
3
3
4
4
4
5
6
6
6
7
CATALOGUE

2
Congratulations on your purchase of this watch winder.
Please review this quick start guide so that your auto-
matic watch will benefit fully from the features that have
been engineered into this product.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
Appliance is only to be used with the power supply unit
provided with the appliance.
Introduction

3
1. The models for DK018SK - DK048SK watch winders comes with a power
adapter (AC/DC3.0V-volt. 1.2A output) and will also run on two "D" cell
batteries.
2. The models for DK068SK , DK098SK, DK128SK watch winders comes with a
power adapter (AC/DC5.0V-volt. 2A output)
1Power
1.1 Optional Plug
Battery Case (Package not including batteries)
Power supply: 3V AC Adapter(US/UK/AU/EU)
Switching Power Supply
MODEL: AP12-050200UP
I/P:AC 100-240V 50-60Hz 0.2A
O/P:DC 3V, 1.2A
l.T.E POWER SUPPLY
FOR HOME OR OFFICE USE ONLY
Shenzhen Sunshine Technological Co.,Ltd.
LPS
MADE IN CHINA
Power supply: 5V AC Adapter(US/UK/AU/EU)
Switching Power Supply
MODEL: AP12-050200UP
I/P:AC 100-240V 50-60Hz 0.28A
O/P: DC 5V, 2A
l.T.E POWER SUPPLY
FOR HOME OR OFFICE USE ONLY
Shenzhen Sunshine Technological Co.,Ltd.
LPS
MADE IN CHINA

4
Note:
Never use any unauthorized power adapter or not up to specification power
adapter.
Pause Switch:
When you turn on the "pause switch" and open the lid, all drums will immediately
stop rotating. When you turn off the "pause switch" and open the lid, all
drums continue rotating.
This unique patent design is best match for different size of watch bracelet /
wrist.
It can fit max 53mm watch dial, watch thickness is up to 20mm, and the
bracelet/ wrist limited from 35 - 62mm.
LED Light:
Each watch box is embedded in the LED light strip, allowing owners to check the
status of the watch more convenient and viewing better.
2The back of the watch box
2Watch Cuff
LED Light
Control
Power
SwitchPause Switch Power Port

5
60mm
53mm
40mm
Detachable
Part
35mm
4How To Use The Watch Cuff
Step 1:Remove the cuff from the winder drum by pulling on the two tabs.
Step 2: Close the strap or bracelet of your watch.
Step 3: Compress the cuff, and slide your watch over the cuff, watch dial
facing outward.
NOTES:
If your watch strap is too short, you can push out the detachable parts at the
bottom, and then follow the steps to put the watch inside. Push the cuff into
the drum until it locks into place, an audible click will be heard.
1. Manual Control TPD Selection Knob design is suitable for the model
DK018SK, DK028SK, DK038SK and DK048SK
5Controls
DK018SK DK028SK DK038SK DK048SK

6
LINE TPD
on/off
Mode 1
Mode 2 Mode 4
Mode 3
2. Manual Control TPD Selection Knob design is suitable for the model
DK018SK, DK028SK, DK038SK and DK048SK
DK068SK DK098SK DK128SK
Direction
Selection
Remote
Control
Signal
Run&Stop
Led light
Watch Selection TPD Selection
TPD Selection Watch selection LED light control
Direction Selection Run&Stop

7
3. LCD Backlit
The LCD backlight assists users to read the LCD. It will be activated when the
power switch on, either the lid open or program have been manipulated. In
order to save power, the backlight will automatically turn off when there is no
input detected for about 10 seconds.
4. Remote Control
(Remote control range up to 5 meters)
Run & Stop
Bi-directional
Watch Selection
(Right)
TPD selection
Watch Selection
(Left)
1950
TPD
650
850
1000 750
LED Light Control
Power Switch
New Watch
Mode Key

8
6Program Setting
6.1 Winding Program for Manual Control Watch Winder
6.2 Winding Program for LCD Remote Control Watch Winder
(Suitable for the model DK018SK, DK028SK, DK038SK and DK048SK)
(Suitable for the model DK068SK, DK098SK, DK128SK)
Mode 1: Rotate 2 minutes clockwise, rest for 6 minutes, cycle repeat
Mode 2: Rotate 2 minutes counter clockwise, rest for 6 minutes, cycle
repeat
Mode 3: Rotate 2 minutes clockwise, rest for 6 minutes, Rotate 2 minutes
counter clock-wise,rest for 6 minutes, cycle repeat
Mode 4: Rotate 5 minutes clockwise, rotate 5 minutes counter -clockwise,
repeat above for 3 hours, rest for 9 hours, cycle repeat.
TPD
650
750
850
1000
1950
No.of Cycle
10
10
10
10
10
Working Time for
10 Cycles( Seconds)
60
60
60
60
60
Stop Time
(Seconds)
467
395
345
250
175
Cycle Period
527
455
405
310
235
For LCD Remote Control Watch Winder
Default working modes: 24 Hours, working for total 12 hours and rest for total 12 hours
Note:
There is no magic number of rotations that will wind your watch. Things such
as how active you are, how many complications your watch has, how
frequently you use the chronograph function, how frequently you wear your
watch, the watch make, how long it has been since it was last serviced and
a host of other variables will impact what your watch requires to stay wound.
And a watch winder won't wind a watch that is fully stopped. So, you need to
manually wind the timepiece to get it running first. You will have to make this
determination by trying the various settings.

9
Note:
· Please do not remove or insert a watch during operation.
· Please do not move the turntables by hand at any time.
· Please make sure A/C connection is out if you don't use the watch winder
for a longer time period.
· Application temperature is during 0°C - 40°C.
· The watch winder should be placed far away from any magnetic objects.
7Contact
If we don't answer your question here, then email us at below:
For our website: [email protected]
After-sales for other selling platform : [email protected]
Whatsapp: [phone]