Dundalk LeisureCraft Harvia User manual
Ph: 519-923-9813 | Fax: 866-458-7583 | Web: www.dundalkleisure raft. om
Install ba k wall shield entered over himney
hole with 1 ½” s rews.
Dundalk LeisureCraft
Harvia Woodburning Heater
Assembly Instru tions
Install floor prote ting sheet against ba k wall
entered between ben hes.
Remove the rear himney over from the stove.
Start by removing all prote tive film from
stainless steel parts before installation.
Insert the Chimney adapter into rear hole
tapping with a rubber mallet until it is snug.
Bring stove into position, entered in front of
hole, about 6” away from wall.
Ph: 519-923-9813 | Fax: 866-458-7583 | Web: www.dundalkleisure raft. om
Insert the “T” onne tor to the short onne tor
ensuring it is straight.
Slide short onne tor onto himney adapter.
Se ure with provided s rews.
Pla e the short onne tor through the hole in
sauna from the outside.
Atta h the himney over plates using 1 ½”
s rews ensuring halves are level. .
Atta h middle himney onne tor to the “T” with
provided s rews.
Dundalk LeisureCraft
Harvia Woodburning Heater
Assembly Instru tions
Ph: 519-923-9813 | Fax: 866-458-7583 | Web: www.dundalkleisure raft. om
Atta h himney support bra es to the sauna
using 1 ½” s rews.
Wrap the himney support strap around himney
and use the provided nut and bolt to se ure.
Ensure not to s rew into any seams.
Atta h rain guard to top himney pie e and
se ure with provided s rews.
Tighten up the himney support bra kets with a
7/16” so ket until snug.
Atta h himney top onto himney and se ure
with provided s rews.
Dundalk LeisureCraft
Harvia Woodburning Heater
Assembly Instru tions
Table of contents
