Dura-Max 68006 User manual

4
U.S. Polymers Inc.
1057 S. Vail Ave.
Montebello, CA 90640
United States of America www.duramaxbp.com
SKU#68006 -1 1 RD-2.0 18-03-2020
CARE AND MAINTENANCE
LIMITED LIFETIME WARRANTY
1. Use a soft, clean cloth that will not scratch the surface while cleaning.
2. Using solvents of any kind on your product may damage the nish.
3. Do not use any harsh abrasives or chemicals to clean any metal surface as it may damage the protective coating.
This product is warranted to the original purchaser. If there is a failure in this unit due to defects in materials or workmanship, the
manufacturer will repair or replace this item at our discretion without charge. Warranty is void if product has been assembled
incorrectly, misused, abused by overloading, altered in any way or damaged due to accident. This warranty is not transferable
and does not cover chipping, aking, scratches, rust, dents, or other damages to the surfaces of this product. Responsibility of the
manufacturer is limited to repair or replacement of this product. The manufacturer is not responsible for consequential, incidental,
or other damages or losses resulting from product failure.
This warranty is in lieu of all other expressed warranties. Some states do not allow the exclusion or limitation of incidental or
consequential damages, therefore, the above limitation may not apply to you. This warranty gives you specic legal rights and you
may have other rights which vary from state-to-state.
1
Customer Service: 1-888-444-0104 Monday - Friday: 8:00 a.m. - 4:30 p.m. PST
ITEM #68006
www.duramaxbp.com
Load Capacity
Top............................. 180 kg / 397 lb
Small Drawer.......... 37 kg / 82 lb
Large Drawer.......... 37 kg / 82 lb
Entire Unit Maximum Capacity: 453 kg / 998 lb
WARNING
Your safety and the safety of others is important to us.
Failure to follow these guidelines can result in property damage or personal injury.
• The product is for indoor use only (Not recommended for outdoor use).
• We strongly recommend that at least two or more adults move and assemble this unit.
• Please ensure that all steps are completed before fully tightening the bolts.
IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE
92 cm
36 in
51 cm
20 in
94 cm
37 in
36” Industrial Metal & Wood Tool Chest

B x 1
Side Handle
C x 2
Swivel
Caster
D x 2
Locking
Caster
E x 4
Hex Bolt
A x 1
Top
32
PARTS
PARTS LIST
ASSEMBLY INSTRUCTIONS
C
C
B
B
E
D
D
E x 4
B
C
C
D
D
A
Note: Assemble upside down according to instructions.
Ensure tool chest top is at on the oor.
To protect the tool chest wood top, we recommend to place top on cardboard.
Step 1
Step 2
C x 2
D x 2
Tool Required (Not Included)
Adjustable Wrench