DUROMAX XP15000EH User manual

This manual provides information regarding the operation and maintenance of these products.
We have made every effort to ensure the accuracy of the information in this manual.
We reserve the right to change this product at any time without prior notice.
MODEL: XP15000EH

INTRODUCTION
Congratulations on your selection of a this generator. We are certain you will be pleased with your purchase of one of
the finest generators on the market.
We want to help you get the best results from your new generator and to operate it safely. This manual contains all the
information on how to do that; please read it carefully.
As you read this manual, you will find information preceded by a symbol.
That information is intended to help you avoid damage to your generator, other property, or
the environment.
We suggest you read the warranty policy to fully understand its coverage and your responsibilities of ownership.
AFEWWORDSABOUTSAFETY
Your safety and the safety of others are very important. And using this generator safely is an important responsibility.
To help you make informed decisions about safety, we have provided operating procedures and other information on
labels and in this manual. This information alerts you to potential hazards that could hurt you or others.
Of course, it is not practical or possible to warn you about all the hazards associated with operating or maintaining a
generator. You must use your own good judgement.
You will find important safety information in a variety of forms, including:

Safety Labels on the generator
.
Safety Headings such as IMPORTANT SAFETY INFORMATION.
 Safety Section such as GENERATOR SAFETY.
Instructions howtousethisgeneratorcorrectlyandsafely.
This entire book is filled with important safety information please read it carefully.
1
Safety Messages preceded by a safety alert symbol and one of three signal words, DANGER, WARNING, or
CAUTION.
When your generator needs scheduled maintenance, keep in mind your servicing dealer is specially trained in
servicing generators. Your authorized servicing dealer is dedicated to your satisfaction and will
be pleased to answer your questions and concerns.

CONTENTS
GENERATOR SAFETY …………………………………………………………………………………………………………………………………………………. 4
IMPORTANT SAFETY INFORMATION ……………………………………………………………………………………………………………………….….4
Operator Responsibility …………………………………………………………………………………………………………………………………….…..4
Carbon Monoxide Hazards ……………………………………………………………………………………………………………………………….….. 4
Electric Shock Hazards ……………………………………………………………………………………………………………………………………….….4
Fire and Burn Hazards ……………………………………………………………………………………………………………………………………….…..4
Refuel With Care ……………………………………………………………………………………………………………………………………………….…..4
SAFETY LABEL LOCATIONS ……………………………………………………………………………………………………………………………….…………5
BEFORE OPERATION
OPERATION
…………………………………………………………………………………………………………………………………………….………..…….. 12
SAFE OPERATING PRECAUTION ……………………………………………………………………………………………………………….………..…….12
STARTING THE ENGINE ………………………………………………………………………………………………………………………….………..………12
STOPPING THE ENGINE ……………………………………………………………………………………………………………………….………..…………13
AC OPERATION ……………………………………………………………………………………………………………………………………….………..…… ..14
AC Receptacle …………………………………………………………………………………………………………………………………….………..…… ..14
AC OUT PUT TERMINAL ……………………………………………………………………………………………………………………….………..……… ..15
AC Applications ………………………………………………………………………………………………………………………………….………..………16
STANDYBY POWER ……………………………………………………………………………………………………………………………….………..………. 17
Connection to a Building’s Electrical System ……………………………………………………………………………………….………..……. 17
System Ground ……………………………………………………………………………………………………………………………………….………..…17
Special Requirements ………………………………………………………………………………………………………………………….………..…….17
2
CONTROLS & FEATURES ………………………………………………………………………………………………………………………………….………… 6
COMPONENT & CONTROL LOCATIONS ……………………………………………………………………………………………………………….………6
CONTROLS ………………………………………………………………………………………………………………………………………………………………… 8
Fuel Valve Lever ……………………………………………………………………………………………………………………………………………….…… 8
Choke Knob …………………………………………………………………………………………………………………………………………………….…… 8
Engine Switch ………………………………………………………………………………………………………………………………………………….…… 8
Circuit Breaker ………………………………………………………………………………………………………………………………………………….……8
FEATURES …………………………………………………………………………………………………………………………………………………………….…… 9
Oil Alert System ……………………………………………………………………………………………………………………………………………….…… 9
Ground Terminal ……………………………………………………………………………………………………………………………………………….… 9
Fuel Gauge …………………………………………………………………………………………………………………………………………………………… 9
Volt Meter …………………………………………………………………………………………………………………………………………………………… 9
Hour Meter ………………………………………………………………………………………………………………………………………………….………10
AC Output Terminal/Cover ……………………….………………………………………………………………………………………………….………10
……………………………………………………………………………………………………………………………………….………..…11
ARE YOU READY TO GET STARTED? ……………………………………………………………………………………………………………….……….. 11
Knowledge …………………………………………………………………………………………………………………………………….………..………… 11
IS YOUR GENERATOR READY TO GO? ………………………………………………………………………………………………….………..………… 11
Check the Engine …………………………………………………………………………………………………………………………….………..…………11
Check the Battery …………………………………………………………………………………………………………………………….………..……… 11
SERVICING YOUR GENERATOR ………………………………………………………………………………………………………….………..…….….. 18
THE IMPORTANCE OF MAINTENANCE …………………………………………………………………………………………….………..…………... 18
MAINTENANCE SAFETY …………………………………………………………………………………………………………………………….………..……18

CONTENTS
Safety Precautions ………………………………………………………………………………………………………….………..……………………….…18
MAINTENANCE SCHEDULE ……………………………………………………………………………………………………….………..…………………… 19
REFUELING ………………………………………………………………………………………………………………………….………..………………………… 19
FUEL RECOMMENDATIONS …………………………………………………………………………………………………………………….………..…….. 20
Gasolines Containing Alcohol ……………………………………………………………………………………………………….………..…………… 21
ENGINE OIL LEVEL CHECK …………………………………………………………………………………………………………….………..………………..21
ENGINE OIL CHANGE …………………………………………………………………………………………………………………………………….………...22
STORAGE ………………………………………………………………………………………………………………………………………………….………..……….28
STORAGE RECAUTION ………………………………………………………………………………………………………………………….………..………..28
Cleaning …………………………………………………………………………………………………………………………………………….………..………28
Fuel …………………………………………………………………………………………………………………………………………………….………..……..28
STORAGE PROCEDURE ……………………………………………………………………………………………………………………………….………..….29
STORAGE PRECAUTIONS ……………………………………………………………………………………………………………………………….………...30
REMOVAL FROM STORAGE ………………………………………………………………………………………………………………………….………..…30
TRANSPORTING ……………………………………………………………………………………………………………………………………….………..…....31
TAKING CARE OF UNEXPECTED PROBLEMS ………………………………………………………………………………………………….………..…..32
ENGINE PROBLEMS …………………………………………………………………………………………………………………………….………..………….32
Engine Will Not Start …………………………………………………………………………………………………………………….………..……………32
Engine Lacks Power ………………………………………………………………………………………………………………………….………..………..32
GENERATOR PROBLEMS ………………………………………………………………………………………………………………….………..……………..33
No Power at the AC Receptacles …………………………………………………………………………………………….………..…………………. 33
OPTIONAL PARTS …………………………………………………………….……………………………………………………………………….………..…….38
Wheel Kit ……………………………………………………………………………………………………………………….………..……………………….… 38
INDEX ……………………………………………………………………………………………………………………………………………….………..…….……… 39
3
OIL FILTER CHANGE ……………………………………………………………………………………………………………………………….………..……….22
ENGINE OIL RECOMMENDATION ………………………………………………………………………………………………………….………..………. 23
AIR CLEANER SERVICE ……………………………………………………………………………………………………………………….……….…………...23
FOAM AIR FILTER CLEANING …………………………………………………………………………………………………………………….………..….. 24
SEDIMENT CAP CLEANING …..…………………………………………………………………………………………………………………….………..…..24
SPARK PLUG SERVICE …………………………………………………………………………………………………………………………….………..……… 24
BATTERY SERVICE …………………………………………………………………………………………………………………………….………..…………… 25
Battery Removal ……………………………………………………………………………………………………………………….………..……………….25
Battery Charging …………………………………………………………………………………………………………………….………..………………….26
TECHNICAL INFORMATION ………………………………………………………………………………………………………………….………..………. 34
SERIAL NUMBER LOCATION …………………………………………………………………………………………………………….………..……………. 34
CARBURETOR MODIFICATION FOR HIGH ALTITUDE
OPERATION ……………………………………………………………………………………………………………………………………….………..….……… 34
SPECIFICATIONS ………………………………………………………………………………………………………………………………….………..………... 35
WIRING DIAGRAM ……………………………………………………………………………………………………………………….………..………………..36

GENERATOR SAFETY
IMPORTANT SAFETY INFORMATION
THIS generators are designed for use with electrical equipment that has suitable power requirements. Other uses can
result in injury to the operator or damage to the generator and other property.
Most accidents can be prevented if you follow all instructions in this manual and on the generator. The most common
hazards are discussed below, along with the best way to protect yourself and others.
Operator Responsibility
Know how to stop the generator quickly in case of emergency.
Understand the use of all generator controls, output receptacles, and connections.
Be sure that anyone who operates the generator receives proper instruction. Do not let children operate the generator
without parental supervision.
Carbon Monoxide Hazards
Exhaust contains poisonous carbon monoxide, a colorless, odorless gas. Breathing carbon monoxide can cause loss
of consciousness and may lead to death.
If you run the generator in an area that is confined, or even partly enclosed area, the air you breathe could contain
dangerous amount of exhaust gas.
Never run your generator inside a garage, house, or near open windows or doors.
Electric Shock Hazards
The generator produces enough electric power to cause a serious shock or electrocution if misused.
Using a generator or electrical appliance in wet conditions, such as rain or snow, or near a pool or sprinkler system,
or when your hands are wet, could result in electrocution. Keep the generator dry.
If the generator is stored outdoors, unprotected from the weather, check all of the electrical components on the
control panel before each use. Moisture or ice can cause a malfunction or short circuit in electrical
components that could result in electrocution.
Do not connect to a building’s electrical system unless an isolation switch has been installed by a qualified electrician.
Do not use the generator without protective switch-off device.
Fire and Burn Hazards
The exhaust system gets hot enough to ignite some materials.
Keep the generator at least 1 meter away from buildings and other equipment during operation.
Do not enclose the generator in any structure.
Keep flammable materials away from the generator
The muffler becomes very hot during operation and remains hot for a while after stopping the engine. Be careful
not to touch the muffler while it is hot. Let the engine cool before storing the generator indoors.
Refuel With Care
Gasoline is extremely flammable, and gasoline vapor can explode. Allow the engine to cool if the generator has been in
operation. Refuel only outdoors in a well ventilated area with the engine OFF. Do not overfill the fuel tank. Never smoke
near gasoline, and keep other flames and sparks away. Always store gasoline in an approved container. Make sure that
a
ny spilled fuel has been wiped up before starting the engine.
4

GENERATOR SAFETY
SAFETY LABEL LOCATIONS
These labels warn you of potential hazards that can cause serious injury. Read them carefully. If a label comes off
or becomes hard to read, contact your THIS servicing dealer for a placement.
THIS generator is designed to give safe and dependable service if operated according to
instructions.
Read and understand the Owner’s Manual before operating the generator. Failure to do so could
result in personal injury or equipment damage.
Exhaust contains poisonous carbon monoxide, a colorless, odorless gas. Breathing carbon
monoxide can cause loss of consciousness and may lead to death.
If you run the generator in an area that is confined, or even partially enclosed area, the air you
breathe could contain a dangerous amount of exhaust gas.
Never run your generator inside a garage, house or near open windows or doors.
Do not connect to a building’s electrical system unless an isolation switch has been installed by
a qualified electrician.
Connections for standby power to a building ’s Electrical system must be made by a
qualified Electrician and must comply with all applicable laws and electrical codes. Improper
connections can allow electrical current from the generator to back feed into the utility lines.
Such back feed may electrocute utility company workers or others who contact the lines during
a power outage, and when utility power is restored, the generator may explode, burn,
or cause fires in the building’s electrical system.
A hot exhaust system can cause serious burns. Avoid contact if the engine has been running.
5

CONTROLS & FEATURES
COMPONENT & CONTROL LOCATIONS
Use the illustrations on these pages to locate and identify the most frequently used controls.
HOU R
METER
CIRCUIT
BREAKER
ENGINE
SWITCH
A
C RECEPTACLES
6
CONTROL PANEL

CONTROLS & FEATURES
AIR CLEANER
OIL LEVEL
DIPSTICK
OIL DRAIN TUBE
BATTERY
7
EMPTY FULL
CYLINDER
HEAD
ELECTRIC
STARTER
FUEL TAN K CA P
FUEL
GAUGE

CONTROLS & FEATURES
CONTROLS
Fuel Valve Lever
The fuel valve lever is located between the fuel tank and carburetor.
The fuel valve lever must be in the ON position for the engine to run.
After stopping the engine, turn the fuel valve lever to the OFF position.
Choke Knob
The choke knob opens and closes the choke valve in the carburetor.
The CLOSED position enriches the fuel mixture for starting a cold
engine.
The OPEN position provides the correct fuel mixture for operation
after starting, and for restarting a warm engine.
Engine Switch
The engine switch controls the ignition system, and it operates the
electric starter.
OFF -- Stops the engine. The engine switch key can be removed/
inserted.
ON -- Running position.
START -- Operates the electric starter.
FUEL VALVE LEVE R
Circuit Breaker
The circuit breaker will automatically switch
OFF, if there is a short circuit or a significant
overload at the receptacles or output
terminals.
The circuit breaker may be used to switch
thegeneratorpowerONorOFF.
ON
OFF
8
CIRCUIT
BREAKER
CHOKE KNOB
OPEN CLOSED
OFF ON STAR
Engine Switch

CONTROLS & FEATURES
FEATURES
Oil Alert System
The Oil Alert system is designed to prevent engine damage caused by an insufficient amount of oil in the
crankcase. Before the oil level in the crankcase can fall below a safe limit, the Oil Alert system will automatically stop the
engine
(the engine switch will remain in the ON position).
If the engine stops and will not restart, check the engine oil level (see Page 21) before trouble shooting in other areas.
Ground Terminal
The ground terminal is connected to the frame of the generator, the metal noncurrent carrying parts of the generator,
and the ground terminals of each receptacle.
Before using the ground terminal, consult a qualified electrician, electrical inspector, or local agency having jurisdiction
for local codes or ordinances that apply to the intended use of the generator.
Attention ! It is compulsorily to make protective earthing before
operating the generator. Protective earthing must correspond to
Rules for Installing Electrical Facilities.
GROUND
TERMINAL
Earthing devices and grounding conductors must be selected in accordance
with chapters 1.7 and 1.8 of Rules for Installing Electrical Facilities.
Usually, copper grounding conductor needed of minimum 4mm
² section.
Fuel Gauge
The fuel gauge is a mechanical device that measures the fuel level in the
tank. The red indicator in the window will reflect the level in relation
to full or empty. To provide increased operating time, start with a full
tank before beginning operation. Check the fuel level with the generator
on a level surface. Always refuel with the engine OFF and cool.
9
EMPTY FULL
Hour Meter
The hour meter indicates the hours the generator has been operated.
Use it to determine when scheduled maintenance should be
Performed .
Hour Meter
FUEL GAUGE FUEL TAN K CA P

BEFORE OPERATION
ARE YOU READY TO GET STARTED?
Your safety is your responsibility. A little time spent in preparation will significantly reduce your risk of injury.
Knowledge
Read and understand this manual. Know what the controls do and how to operate them.
Familiarize yourself with the generator and its operation before you begin using it. Know how to quickly shut off
the generator in case of an emergency.
If the generator is being used to power appliances, be sure that they do not exceed the generator’s load rating .
IS YOUR GENERATOR READY TO GO?
For your safety, and to maximize the service life of your equipment, it is very important to take a few moments before
you operate the generator to check its condition. Be sure to take care of any problem you find, or have your servicing
To prevent a possible fire, keep the generator at least 1 meter away from building walls and other equipment during
operation. Do not place flammable objects close to the engine.
Before beginning your preoperation checks, be sure the generator is on a level surface and the engine switch is in the
OFF position.
Check the Engine
Check the oil level (see page 19). A low oil level will cause the Oil Alert system to shut down the engine.
Check the air cleaner (see page 21).A dirty air cleaner element will restrict air flow to the carburetor, reducing engine
and generator performance.
Check the fuel level (see page 18).Starting with a full tank will help to eliminate or reduce operating interruptions for
refueling.
Check the Battery
Check the fuel electrolyte level (see page 24).If the electrolyte level is
below the LOWER level, sulfation and battery plate damage will occur.
BATTE RY
10

OPERATION
SAFE OPERATING PRECAUTIONS
Before operating the generator for the first time, please review the GENERATOR SAFETY section and the chapter titled
BEFORE OPERATION.
For your safety, do not operate the generator in an enclosed area such as a garage. Your generator’s exhaust contains
poisonous carbon monoxide gas that can collect rapidly in an enclosed area and cause illness or death.
Before connecting an AC appliance or power cord to the generator:
Use grounded 3 prong extension cords for single phase generator and 5 prong extension cords for three generator,
tools, and appliances, or double insulated tools and appliances.
Inspect cords and plugs, and replace if damaged.
Make sure that the appliance is in good working order. Faulty appliances or power cords can create a potential for
electric shock.
Make sure the electrical rating of the tool or appliance does not exceed that of the generator. Never exceed the
maximum power rating of the generator. Power levels between rated and maximum may be used for no more than
30 minutes.
Operate the generator at least 1 meter away from buildings and other equipment.
Do not operate the generator in an enclosed structure.
STARTING THE ENGINE
1. Make sure that the circuit breaker is in the OFF position.
The generator maybe hard to start if a load is connected.
CIRCUIT
BREAKER
2. Turn the fuel valve lever to the ON position.
FUEL VALVE LEVER
11
ON
OFF
OFF
ON

OPERATION
Leave the choke knob in the OPEN position to restart a warm engine.
If theenginefailstostartwithin5seconds,releasethekey,andwaitat
least 10 seconds before operating the starter again.
NOTICE
Using the electric starter for more than 5 seconds at a time will Overheat the starter motor and can damage it.
5. If the choke knob was pulled to the CLOSED position to start the engine,
gradually move it to the OPEN position as the engine warms up.
12
OPEN
CHOKE KNOB
CLOSED
CHOKE KNOB
3-1.
4-1.
6. Generator needs to operate for 3-5 minutes without load, then
it can out put power.
ENGINE SWITCH
OFF ON STAR
3. Pull the choke knob to the CLOSED position to start a cold engine.
4. Start the engine. Turn the engine switch to the START position, and hold
it there until the engine starts. When the engine starts, release the
key,allowingtheswitchtoreturntotheONposition.
start if a load is connected.
1 Make sure that the AC circuit breaker is in the OFF position. The generator may be hard to
2 Turn the gasoline fuel valve to the "OFF" position.
3 Connect the propane gas hose to the regulator/decompression valve.
4 Connect the propane gas collar to the gas supply and then turn on the propane gas supply.
5 Press the button on top of the pressure release valve down two or three times.

STOPPING THE ENGINE
To stop the engine in an emergency, simply turn the engine switch to the OFF position. Under normal conditions, use
the following procedure.
1. Move the circuit breaker to the OFF position.
CIRCUIT
BREAKER
OFF
ON
2 Turn the engine switch to the OFF position.
1 Turn the AC circuit breaker to the OFF position. Disconnect DC battery charging cables.
In normal use:
To stop the engine in an emergency, move the engine switch to the OFF position.
In an emergency:
Stopping the Engine
When the engine starts, allow the engine switch to return to the ON position.
be recharged.
If the speed of the starter motor drops after a period of time, it is an indication that the battery should
release the switch and wait 10 seconds before operating the starter again.
Operating the starter motor for more than 5 seconds can damage the motor. If the engine fails to start,
3 Turn the off the propane gas supply.
b. If the engine is cold (the unit was not run recently) start with the choke "OPEN".
7 Turn the engine key switch to the START position and hold it there for 5 seconds, or until the
engine starts.
Decompression
Valve / Regulator
Connect to propane
gas
s upp l y.
i. Wait 30 seconds and then push the choke lever all the way to the "OPEN" position.
a. If the engine is warm (the unit was run recently) start with the choke half open.
6 The choke operates differently on propane gas.

OPERATION
.
ENGINE SWICH
4.Turn the fuel valve lever to the OFF position.
AC OPERATION
ACReceptacle
1. Start the engine (see page 11).
2. Switch ON the circuit breaker.
3. Plug in the appliance.
Most motorized appliances require more
than their rated wattage for startup.
CIRCUIT
BREAKER
13
OFF ON STAR
OFF
ON
NOTICE
If an appliance beings to operate abnormally, becomes sluggish or stops suddenly, turn it off immediately. Disconnect the
appliance, and determine whether the problem is in the appliance or the rated load capacity of the generator has been
exceeded.
Substantial over loading may damage the generator.Marginal over loading may shorten the service life of the generator.
2-1.
OFF
ON
FUEL VALVE LEVER
4.
2. TurntheengineswitchtotheOFFposition

OPERATION
AC Applications
Before connecting an appliance or power cord to the generator:
Make sure that it is in good working order. Faulty appliances or Power cords can create a potential for electrical
shock.
If an appliance begins to operate abnormally, becomes sluggish, or stops suddenly, turn it
off immediately. Disconnect the appliance, and determine whether the problem is the appliance or the rated
load capacity of the generator has been exceeded.
Make sure that the electrical rating of the tool or appliance does not exceed that of the generator. Never exceed
the maximum power rating of the generator. Power levels between rated and maximum may be used for no more
than 30 minutes.
NOTICE
Substantial overloading will open the circuit breaker. Exceeding the time limit for maximum power operation or slightly
overloading the generator may not switch the circuit breaker OFF, but will shorten the service life of the generator.
Limit operation requiring maximum power to 30 minutes.
Maximum power is:
14
60Hz 13kVA
For continuous operation (longer than 30 minutes), do not exceed the rated
power. Rated power is:
60Hz 12 kVA

OPERATION
The total power requirements (VA) of all appliances connected must be considered. Appliance
and power tool manufacturers usually list rating information near the model number or serial number.
STANDBY POWER
Connections to a Building’s Electrical System
Your generator can supply power to a building’s electrical system. If the generator will be used as
an alternative to utility company power, an isolation switch must be installed to disconnect the utility lines from
the building when the generator is connected. Installation must be performed by a qualified electrician and must
comply with all applicable laws and electrical codes.
In some areas, generators are required by law to be registered with local utility companies. Check local regulations for
proper registration and use procedures.
System Ground
THIS generators have a system ground that connects the generator frame components to the ground terminals in the
AC output receptacles. The system ground is not connected to the AC neutral wire. If the generator is
tested with a receptacle tester, it will not show the same ground circuit condition as for a home receptacle.

In some areas, generators are required to be registered with local utility companies.
If the generator is used at a construction site, there may be additional regulations that must be observed.
15
Special Requirements

SERVICING YOUR GENERATOR
THE IMPORTANCE OF MAINTENANCE
Good maintenance is essential for safe, economical, and trouble free operation. It will also help reduce air pollution.
To help you properly care for your generator, the following pages include a maintenance schedule, routine inspection
procedures, and simple maintenance procedures using basic hand tools. Other service tasks that are more difficult or
require special tools are best handled by professionals and are normally performed by a THIS
technician or other qualified mechanic.
The maintenance schedule applies to normal operating conditions. If you operate your generator under
unusual conditions, such as sustained high load or high temperature operation, or use it in dusty
conditions, consult your servicing dealer for recommendations applicable to your individual needs and use.
Remember that your servicing dealer knows your generator best and is fully equipped to maintain and repair it.
MAINTENANCE SAFETY
Some of the most important safety precautions follow. However, we cannot warn you of every conceivable hazard that
can arise in performing maintenance. Only you can decide whether or not you should perform a given task.
Safety Precautions
Make sure the engine is off before you begin any maintenance or repairs. This will eliminate several potential hazards:
Carbon monoxide poisoning from engine exhaust.
Be sure there is adequate ventilation whenever you operate the engine.
Burns from hot parts.
Let the engine and exhaust system cool before touching.
Injury from moving parts.
Do not run the engine unless instructed to do so.
16

SERVICING YOUR GENERATOR
Read the instructions before you begin, and make sure you have the tools and skills required.
To reduce the possibility of fire or explosion, be careful when working around gasoline. Use only a nonflammable
solvent, not gasoline, to clean parts. Keep cigarettes, sparks, and flames away from all fuel related parts.
MAINTENANCE SCHEDUL
E
NOTE: (*) Replace the
pa
per element only.
(1) Service more frequently when used industry areas
.
(2) These items should be serviced by your servicing dealer, unless you have the proper tools and are
m
echanically proficient. Refer to our shop manual for service procedures.
(3) For commercial use, log hou
r
s of operation to determine prope
r
maintenance intervals.
Failure to f
ol
low this maintenance schedule could result in nonwarrantable failures.
REFUELING
With the
en
gine stopped, check the fuel gauge. Refill the fuel
ta
nk if the fuel level is low.
17
*

SERVICING YOUR GENERATOR
Refuel in a well ventilated area before starting the engine. If the engine has been running, allow it to cool. Refuel
carefully to avoid spilling fuel. Do not fill the fuel tank above the upper limit mark (red) on the fuel strainer.
Never refuel the engine inside a building where gasoline fumes may reach flames or sparks. Keep gasoline away from
appliance pilot lights, barbecues, electric appliances, power tools, etc.
Spilled fuel is not only a fire hazard, it causes environmental damage. Wipe up spills immediately.
NOTICE
Fuel can damage paint and plastic. Be careful not to spill fuel when filling your fuel tank. Damage caused by spilled fuel
is not covered under warranty.
NOTE:
Gasoline spoils very quickly depending on factors such as light, exposure, temperature and time.
In worst cases, gasoline can be contaminated within 30days.
Using contaminated gasoline can seriously damage the engine (carburetor clogged, valve stuck).
Such damage due to spoiled fuel is disallowed from coverage by the warranty.
To avoid this please strictly follow these recommendations:
Only use specified gasoline .
Use fresh and clean gasoline.
To slow deterioration, keep gasoline in a certified fuel container.
If long storage (more than 30 days) is foreseen, drain fuel tank and carburetor (see page27).
FUEL RECOMMENDATIONS
Use automotive unleaded gasoline with a Research Octane Number of 91 or higher (a Pump Octane Number of 86 or
higher).
Never use stale or contaminated gasoline or an oil/gasoline mixture.
Avoid getting dirt or water in the fuel tank.
18
EMPTY FULL
FUEL TAN K
FUEL GAUGE